Abstract:This paper applications inclined exposure, millimeter grade thickness polymer processing technology, and optimized process parameters to produce a 45 degrees mirror structure that can be used in micro optical pickup heads meeting optical surface roughness requirements. The mirror structure was made from polymer material. Quantitative ultra-low-speed coating and surface tension were employed to fabricate microstructures with a height of approximately 1.5 turn, white overcoming the restriction that ordinary silicon wafers can only have a thickness of several hundred mu m. AFM and interferometer measurements indicated that surface roughness was approximately 10 nm, which complies with optical grade lambda/40 (lambda = 405nm) requirements. The method can therefore be used to blue light optical pickup heads for micro-optical storage systems. To resolve the problem of diffraction when the surface of the thick photoresist is not flat during exposure and also ease the problem of matching the indices of refraction of materials with different UV tight transmission. This paper filled the space between the mask and photoresist with materials with matching indices of refraction in order to create a medium with matching index of refraction, which can increase the structure's applicability during the integration process. This technique offers high thickness and angle selectivity, and can be advantageously used in array and batch manufacturing. It can further be used to produce a pair of completely parallel 45 degrees mirror structures while avoiding the huge cost and alignment error of manual assembly.

Optimization of vertical coupling induced by 45° micro-mirrors in double-layer polymer optical waveguides with CO_2 laser smoothing

Design of Ultrabroadband Double-Chirped Mirror Pairs for Ultrafast Lasers

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Optimization of Longitudinal Alignment of an 4<i>f</i> System in a Compact Vectorial Optical-Field Generator Based on a High-Resolution Liquid Crystal Spatial Light Modulator

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Interlayer Slope Waveguide Coupler for Multilayer Chalcogenide Photonics

45° polymer-based total internal reflection coupling mirrors for fully embedded intraboard guided wave optical interconnects

45 Degrees Polymer-Based Total Internal Reflection Coupling Mirrors For Fully Embedded Intraboard Guided Wave Optical Interconnects

Single-mode Fiber Auto-Coupling System with Wedges

Optimized dielectric mirror coating designs for quasi-harmonic cavity resonance

Single-etched fiber-chip coupler with a metal mirror on a 220-nm silicon-on-insulator platform for perfectly vertical coupling

Vertical Coupling Between Waveguides and Optical Fibers Utilizing Polarization Gratings

Optimal Fabricate Technology of Polymer Micro Optical Mirror

Simulation and Optimization of Polymer Directional Coupled Electro-optic Switches

The coupling study between multi-channel laser diodes and multimode fiber in a fiber pump laser

Design of a Polymer Directional Coupler Electro-Optic Switch with Low Push-Pull Switching Voltage at 1550nm

Novel Optical Torsion-Mirror Components For Fiber Sensing Or Networking Applications

Design of a Completely Vertical, Polarization-Independent Two-Dimensional Grating Coupler with High Coupling Efficiency

Broadband and low-reflection mid-infrared grating coupler for a perfectly vertical fiber-chip interface

Laser and water-jet fiber coupling technology for water-jet guided laser micromachining

Simulation and optimization of a polymer directional coupler electro-optic switch with push–pull electrodes