Abstract:<p>Modern CW or pulsed superconducting accelerators of megawatt beams require efficient RF sources controllable in phase and power. Typically, the costs of the RF sources and their operation are a significant part of the total cost for large-scale projects. The efficiency of the traditional RF sources (klystrons, IOTs, solid-state amplifiers) is lower in comparison to magnetrons and the cost of RF power per Watt is significantly higher. Therefore the magnetron-based controlled in phase and power RF sources could significantly reduce the capital and operation costs of ADS and SNS like projects or, e.g., the Electron-Ion Collider projects unlike the traditional RF sources. Currently, a number of works suggests the use of magnetrons controlled by a resonant injected (injection-locking) RF signal instead of traditional RF sources. We developed a new approach to controlling magnetrons for superconducting accelerators with megawatts beams In the presented work we describe an innovative technique producing the "stimulated" RF generation of magnetrons powered below the self-excitation threshold voltage. This was predicted and substantiated by a recently developed kinetic (electrodynamic) model of magnetron operation. The technique allowing operation in CW and pulse modes has been experimentally verified and studied. It allows stable, controllable in phase and power operation of magnetrons providing efficiency higher than other types of RF power sources. The technique does not require high voltage pulse modulators for a pulsed RF generation. It also looks to be a promising opportunity to improve magnetron reliability and extend life time. Measured characteristics of the developed technique, its experimental verification and verification of the kinetic model briefly presented in the text are discussed in our work.</p>

The Low-Voltage Magnetrons with Two Energy Outputs

Final version - The Low-Voltage X, <tex>$\mathrm{K}_{\mathrm{u}}$</tex> and W-Bands Magnetrons with Two Energy Outputs: New Possibilities

Final Version - the Low-Voltage X, $\mathrm{k}_{\mathrm{u}}$ and W-Bands Magnetrons with Two Energy Outputs: New Possibilities

Low-Voltage Kᵤ-Range Magnetron with Two Outputs of Energy: Design Features and Main Advantages

A Magnetron Using an Additional External Reactive Load for Frequency Tuning: Theory Features and Experiment

Experimental Study of Magnetron's Power-Pulled Characteristic to Realize a Quasi-Dual-Frequency Microwave Output

Experimental Study of a Low Voltage, 100S'-Kw, X-Band, Multiport Magnetron for Phased Array Applications

Simulation and Design of Rising-Sun Anode Blocks for Magnetrons with Two Outputs of Energy

Extracting millimeter-wavelength radio emission from a relativistic magnetron

Stimulated Generation of Magnetrons powered below the Self-Excitation Threshold Voltage

A high-efficiency tunable relativistic magnetron with diffraction output

Particle-In-Cell Simulations of High Efficiency 12-Vanes 2.45 GHz Continuous Wave Magnetron

A Method of Tuning Frequency in S -Band Continuous-Wave Magnetron

First Demonstration and Performance of X-Band High-Power Magnetron With Parallel Cathodes

To the vacuum conditions that provided the process of electromagnetic waves generated by a relativistic magnetron

Comparison of Excitation Voltage-Waveforms for Millimeter-Wave Magnetron

Compact and High-Efficiency Magnetron with All-Cavity Diffraction Output

Design of a Simultaneous Information and Power Transfer System Based on a Modulating Feature of Magnetron

S -Band GW-Level Relativistic Magnetron Operating at Relatively Low Applied Voltage

Circuit Design and Analysis of an External Coupled Magnetron at Ka Band for High Power Applications

Experimental investigation of relativistic magnetron