Thermoconformable, Flexible Lithium‐Ion Batteries

Nicola Boaretto,Beatriz Dávila,Sonia Sevilla,Guzmán García,Anastasiia Mikhalchan,Moumita Rana,Abdulmalik Yusuf,Lucio Ubierna Martinez,Marta Castillo García,Jesús Palma,De‐Yi Wang,Rebeca Marcilla,Juan José Vilatela

DOI: https://doi.org/10.1002/admt.202101635

IF: 6.8

2022-03-25

Advanced Materials Technologies

Abstract:This work introduces a scalable method for fabrication of flexible, thermoconformable lithium‐ion batteries, suitable for the interior of vehicles. Electrodes with a composite structure are fabricated by combining conventional granular slurries with a porous carbon nanotube fabric current collector and a solid gel polymer electrolyte. The composite structure reduces polarization at high current densities, for example, with 50% and 17% higher charge capacity at 1C in LTO/Li half cells than control samples and commercial electrodes, respectively. Introducing a gel‐polymer electrolyte increases cell durability, safety, and thermal stability. Cyclability test at of 1C shows a capacity retention as high as 91% after almost 400 cycles (average capacity fade of 0.025% cycle−1). Full cells operate from 0 to 60 °C without any additives. Cells stored for 30 min up to 90 °C suffer minor capacity degradation. The possibility to withstand high temperatures and significant flexural deformation enable subjecting these pouch cells to thermoconformable processes. A roof panel with four 25 cm2 pouch cells is demonstrated. Flammability test shows that the carbon nanotube fibers (CNTF)‐LFP/CNTF‐LTO cells have a 50% lower peak of heat release rate and a much smaller total heat released than control cells with metallic current collector and liquid electrolyte. This work introduces a scalable method for fabrication of flexible, thermoconformable lithium‐ion batteries, based on electrodes with a composite structure fabricated by combining conventional granular slurries with a porous carbon nanotube fabric current collector and a solid gel polymer electrolyte. The cells have lower polarization, tolerance to mechanical deformation, extended thermal stability, and reduced flammability.

materials science, multidisciplinary