Abstract:Broadband photodetectors (PDs) capable of multi-wavelength detection have garnered significant interest for applications in environmental monitoring, optical communication, spectral analysis, and imaging sensing. Low-bandgap Pb-Sn hybrid perovskite photodetectors can extend the spectral response from the ultraviolet-visible (UV-vis) range to the near-infrared (NIR) and reduce the toxicity associated with Pb2+. The strategic introduction of Sn2+ into Cs0.15FA0.85PbxSn1-xI3 (x = 1, 0.8, 0.6, 0.5, 0.4, 0.2, and 0) not only preserves the cubic crystal structure with conformal multigrain growth but also broadens the film's absorption spectrum from 800 to 1000 nm NIR region. This indicates a well-controlled tunability of the Pb-Sn binary perovskite system. Specifically, the self-powered photodetector with a device structure of ITO/NiOx/PTAA/Cs0.15FA0.85Pb0.5Sn0.5I3/PCBM/BCP/Ag has shown remarkable optoelectrical properties. It exhibits a high external quantum efficiency (EQE) of up to 80% across the spectrum from 300 to 1000 nm, a responsivity (R) exceeding 0.5 A/W, and high detectivity (D*) value of 1.04 x 1012 Jones at 910 nm and 3.38 x 1011 Jones at 1000 nm after weak attenuation. Intriguingly, the dark current of the Cs0.15FA0.85Pb0.5Sn0.5I3 device is four orders of magnitude lower than that of devices made with pristine Pb or Sn only, strongly correlating with its significantly increased built-in potential and reduced trap density. Consequently, it demonstrates a -3 dB bandwidth of 2.23 x 104 Hz, fast rise and decay times of 61 and 30 mu s, respectively, and a linear dynamic range (LDR) of 155 dB. Benefiting from its high sensitivity, a 5 x 5 PD array for NIR imaging and non-invasive pulse detection for photoplethysmography applications has been successfully demonstrated, showcasing the prosperous potential of Pb-Sn hybrid perovskite in the NIR range.image The rationally introduction of Sn2+ of the Cs0.15FA0.85PbxSn1-xI3 (x = 1, 0.8, 0.6, 0.5, 0.4, 0.2, and 0) could not only maintain the cubic crystal structure with conformal multigrain growth, but also expand the film absorption from 800 to 1000 nm near-infrared (NIR) region, reaching high external quantum efficiency (EQE) up to 80%. image

Efficient Visible–Near‐Infrared Hybrid Perovskite:PbS Quantum Dot Photodetectors Fabricated Using an Antisolvent Additive Solution Process

Embedding PbS Quantum Dots in MAPbCl0.5Br2.5 Perovskite Single Crystal for Near‐infrared Detection

32.2: Invited Paper: Embedding PbS Quantum Dots (qds) in MAPbCl0.5Br2.5 Perovskite Single Crystal for Near‐infrared Detection

Self-powered Photodetectors Based on CsPbBr3 Quantum Dots/organic Semiconductors/sno2 Heterojunction for Weak Light Detection

Converting Perovskite Nanocrystals to PbS Quantum Dots Toward Short‐Wave Infrared Photodetectors

Hybrid perovskite exchange of PbS quantum dots for fast and high-detectivity visible–near-infrared photodetectors

A broad-spectral-response perovskite photodetector with a high on/off ratio and high detectivity

Rational Composition Engineering for High-Quality Pb-Sn Photodetector Toward Sensitive Near-Infrared Digital Imaging Arrays

High responsivity VIS-NIR photodetector based on (PEA)2PbI4/P3HT Heterojunction

CsPbBr3 Perovskite Quantum Dots/p-Gan Heterojunction for Ultraviolet-Visible Spectrum Photodetectors

Solution-Processed Ultrahigh Detectivity Photodetectors by Hybrid Perovskite Incorporated with Heterovalent Neodymium Cations

Perovskite/Polymer Hybrid Thin Films for High External Quantum Efficiency Photodetectors with Wide Spectral Response from Visible to Near‐Infrared Wavelengths

SnS Quantum Dots Enhancing Carbon-Based Hole Transport Layer-Free Visible Photodetectors

Electrically Modulated Near-Infrared/Visible Light Dual-Mode Perovskite Photodetectors

Double Active Layers Constructed with Halide Perovskite and Quantum Dots for Broadband Photodetection

Ambient-Stable and High On/Off Ratio Near-Infrared Photodetector Based on Perovskite-Treated PbS Colloidal Quantum Dots

PbS Quantum Dots-Induced Trap-Assisted Charge Injection in Perovskite Photodetectors

High Performance 0D ZnO Quantum Dot/2D (PEA)2PbI4 Nanosheet Hybrid Photodetectors Fabricated via a Facile Antisolvent Method

Performance‐Enhancing Broadband and Flexible Photodetectors Based on Perovskite/ZnO‐Nanowire Hybrid Structures

High performance UV–vis–NIR photodetectors based on ZnO/organic–inorganic Sn–Pb hybrid perovskite heterojunction

Room‐Temperature‐Operated Ultrasensitive Broadband Photodetectors by Perovskite Incorporated with Conjugated Polymer and Single‐Wall Carbon Nanotubes