Abstract:Surface coatings (biofilms and associated minerals) were collected on glass slides in the oxic surface waters of Cayuga Lake (New York State, U.S.A.) and were used to evaluate the relative contributions of Fe, Mn and Al oxides and organic material to total observed Pb and Cd adsorption by the surface coating materials. Several alternative selective extraction techniques were evaluated with respect to both selectivity and alteration of the residual unextracted material. Pb and Cd adsorption was measured under controlled laboratory conditions (mineral salts solution with defined metal speciation, ionic strength 0.05M, 25°C and pH 6.0) before and after extractions to determine by difference the adsorptive properties of the extracted component(s). Hydroxylamine hydrochloride (0.01M NH2OH·HCl+0.01M HNO3) was used to selectively remove Mn oxides, sodium dithionite (0.3M Na2S2O4) was used to remove Mn and Fe oxides, and 10% oxalic acid was used to remove metal oxides and organic materials. Several other extractants were evaluated, but preliminary experiments indicated that they were not suitable for these experiments because of undesirable alterations of the residual, unextracted material. The selected extraction methods removed target components with efficiencies between 71 and 83%, but significant amounts of metal oxides and organic materials other than the target components were also removed by the extractants (up to 39%). Nonlinear regression analysis of the observed Pb and Cd adsorption based on the assumption of additive Langmuir adsorption isotherms was used to estimate the relative contributions of each surface coating constituent to total Pb and Cd binding of the biofilms. Adsorption of Cd to the lake biofilms was dominated by Fe oxides, with lesser roles attributed to adsorption by Mn and Al oxides and organic material. Adsorption of Pb was dominated by Mn oxides, with lesser roles indicated for adsorption to Fe oxides and organic material, and the estimated contribution of Al oxides to Pb adsorption was insignificant. The fitted Pb adsorption isotherm for Fe oxides was in excellent agreement with those obtained through direct experiments and reported in independent investigations. The estimated Pb distribution between surface coating components also agreed well with that previously predicted by an additive adsorption model based on Pb adsorption isotherms for laboratory surrogates for Mn, Fe and Al oxides and defined biological components.

Investigation of Fe, Mn Oxides and Organic Material in Surface Coatings and Pb, Cd Adsorption to Surface Coatings Developed in Different Natural Waters

Adsorption of Pb, Cd to Fe, Mn Oxides in Natural Freshwater Surface Coatings Developed in Different Seasons.

Comparison of Pb,Cd Adsorption to Surface Coatings Developed in Natural Waters with That in Plant Effluents

Lead Adsorption Capacities of Different Components in Natural Surface Coatings.

Lead Adsorption to Metal Oxides and Organic Material of Freshwater Surface Coatings Determined Using a Novel Selective Extraction Method.

Lead and Cadmium Adsorption Onto Iron Oxides and Manganese Oxides in the Natural Surface Coatings Collected on Natural Substances in the Songhua River of China

Relationship Between Pb/Cd Adsorption and Metal Oxides on Surface Coatings at Different Depths in Lake Jingyuetan

Comparison of Pb and Cd Adsorption to the Surface Coatings and Surficial Sediments Collected in Xianghai Wetland

Adsorption of Pb and Cd Onto Metal Oxides and Organic Material in Natural Surface Coatings As Determined by Selective Extractions: New Evidence for the Importance of Mn and Fe Oxides

Effects of suspended particulates in Nanhu Lake on Pb and Cd adsorption to surface coatings developed in the natural water

Selective chemical extraction and separation of Mn, Fe oxides and organic material in natural surface coatings: application to the study of trace metal adsorption mechanism in aquatic environments

Investigation of Adsorption Rates of Pb, Cd, Cu, Co and Ni to Fresh-Water Surface Coatings Developed in Nanhu Lake

Cd Adsorption Properties Of Components In Different Freshwater Surface Coatings: The Important Role Of Ferromanganese Oxides

[Characteristics of Pb and Cd Adsorption to Surface Coatings Sampled in the Aquatic Environment of Wetland].

Comparison of lead, cadmium, copper and cobalt adsorption onto metal oxides and organic materials in natural surface coatings

Study on Adsorption Capacities of Pb and Cd Onto Surface Sediments Collected in the Aquatic Environments of Wetland

Chemical Species of Fe and Mn Oxides in Natural Surface Coatings

Investigation on the distribution characteristics of trace heavy metals in the natural surface coatings samples(NSCSs)

Study on fractions of adsorbed Pb and Cd onto natural surface coatings.

Relationship Between Growth Environment of Natural Surface Coating and Its Adsorptive Power of Pb and Cd

Comparison of the Adsorption of Lead, Cadmium, Copper, Zinc and Barium to Freshwater Surface Coatings