Abstract:Surface coatings (biofilms and associated minerals) were collected on glass slides in the oxic surface waters of Cayuga Lake (New York State, U.S.A.) and were used to evaluate the relative contributions of Fe, Mn and Al oxides and organic material to total observed Pb and Cd adsorption by the surface coating materials. Several alternative selective extraction techniques were evaluated with respect to both selectivity and alteration of the residual unextracted material. Pb and Cd adsorption was measured under controlled laboratory conditions (mineral salts solution with defined metal speciation, ionic strength 0.05M, 25°C and pH 6.0) before and after extractions to determine by difference the adsorptive properties of the extracted component(s). Hydroxylamine hydrochloride (0.01M NH2OH·HCl+0.01M HNO3) was used to selectively remove Mn oxides, sodium dithionite (0.3M Na2S2O4) was used to remove Mn and Fe oxides, and 10% oxalic acid was used to remove metal oxides and organic materials. Several other extractants were evaluated, but preliminary experiments indicated that they were not suitable for these experiments because of undesirable alterations of the residual, unextracted material. The selected extraction methods removed target components with efficiencies between 71 and 83%, but significant amounts of metal oxides and organic materials other than the target components were also removed by the extractants (up to 39%). Nonlinear regression analysis of the observed Pb and Cd adsorption based on the assumption of additive Langmuir adsorption isotherms was used to estimate the relative contributions of each surface coating constituent to total Pb and Cd binding of the biofilms. Adsorption of Cd to the lake biofilms was dominated by Fe oxides, with lesser roles attributed to adsorption by Mn and Al oxides and organic material. Adsorption of Pb was dominated by Mn oxides, with lesser roles indicated for adsorption to Fe oxides and organic material, and the estimated contribution of Al oxides to Pb adsorption was insignificant. The fitted Pb adsorption isotherm for Fe oxides was in excellent agreement with those obtained through direct experiments and reported in independent investigations. The estimated Pb distribution between surface coating components also agreed well with that previously predicted by an additive adsorption model based on Pb adsorption isotherms for laboratory surrogates for Mn, Fe and Al oxides and defined biological components.

Selective chemical extraction and separation of Mn, Fe oxides and organic material in natural surface coatings: application to the study of trace metal adsorption mechanism in aquatic environments

Selective Extraction and Separation of Fe, Mn Oxides and Organic Materials in River Surficial Sediments

Investigation of Fe, Mn Oxides and Organic Material in Surface Coatings and Pb, Cd Adsorption to Surface Coatings Developed in Different Natural Waters

Lead Adsorption to Metal Oxides and Organic Material of Freshwater Surface Coatings Determined Using a Novel Selective Extraction Method.

Lead and Cadmium Adsorption Onto Iron Oxides and Manganese Oxides in the Natural Surface Coatings Collected on Natural Substances in the Songhua River of China

THE APPLICATION OF A NOVEL SELECTIVE EXTRACTION METHOD TO THE EXTRACTION OF Fe AND Mn OXIDES IN SURFACE COATINGS

Adsorption of Pb and Cd Onto Metal Oxides and Organic Material in Natural Surface Coatings As Determined by Selective Extractions: New Evidence for the Importance of Mn and Fe Oxides

Study on Selective Extraction of Main Components of Sediments, Suspended Particulate and Surface Coatings Sampled from Songhua River

Adsorption of Pb, Cd to Fe, Mn Oxides in Natural Freshwater Surface Coatings Developed in Different Seasons.

Establishment of a Selective Extraction Technique for the Separation of Iron and Manganese Oxides and Organic Materials in the Natural Surface Coating Samples (Nscss)

Investigation on the distribution characteristics of trace heavy metals in the natural surface coatings samples(NSCSs)

Selective Extraction of Fe and Mn Oxides from Biofilms Collected in Natural Waters

Adsorption of Cu and Zn onto Mn/Fe oxides and organic materials in the extractable fractions of River surficial sediments

Chemical Species of Fe and Mn Oxides in Natural Surface Coatings

Cd Adsorption Properties Of Components In Different Freshwater Surface Coatings: The Important Role Of Ferromanganese Oxides

Lead Adsorption Capacities of Different Components in Natural Surface Coatings.

Cu and Zn Adsorption Onto Non-Residual and Residual Components in the Natural Surface Coatings Samples (nscss) in the Songhua River, China

Effect of selective extraction on the non-residual fractions, structures and adsorption characteristics of clay mineral in the surficial sediments

Extraction of Main Components and Characteristics of Heavy Metals Distribution in the Suspended Particulate Matters in Natural Waters

Comparison of Trace Metal Adsorption Onto Different Solid Materials and Their Chemical Components in A Natural Aquatic Environment

Comparison of lead, cadmium, copper and cobalt adsorption onto metal oxides and organic materials in natural surface coatings