Effect of Geometric Parameters of Electrodes on Skin Heating for the Design of Non-Ablative Radiofrequency Device

Yiyou Ma,Nianou Wang,Ke Li,Huan Liang,Jingfeng Bai,Xiang Ji
DOI: https://doi.org/10.1111/srt.13472
2023-01-01
Abstract:BackgroundNon-ablative radiofrequency (RF) has been widely used in clinical and at-home cosmetics devices. RF electrode geometry can influence the heat distribution in the tissue. This study analyzes the influence of geometric parameters of the electrode on the heat distribution in the layered tissue.Materials & methodsThe finite element simulation of the electrothermal coupling field was performed to obtain the three-dimensional (3D) temperature distribution of the four-layer tissue. The electrode geometric parameters including the inter-electrode spacing (5-12 mm), width (1-3 mm), length (3-10 mm), shapes (bar, dot and circle), and the coupling gel's electrical conductivity (0.2-1.5 S/m) were simulated. The maximum temperature at 2 mm depth (T-2 mm) and the temperature difference (Tdiff) between the maximum skin surface temperature and T-2 mm were obtained to evaluate the effectiveness and safety.ResultsThe effect of geometric parameters on the effectiveness and safety was mixed. The maximum T-2 mm occurred with the 5 mm inter-electrode spacing, 3 mm width, 10 mm length, the circle-shaped electrode, and the 1.5 S/m coupling gel's electrical conductivity. The ratio of inter-electrode spacing to width at around four can achieve rapid temperature rise and skin surface temperature protection. The electrode shape influenced the area of temperature rise in the tissue's cross-section. The coupling gel's electrical conductivity should be close to that of the skin to avoid energy accumulation on the skin surface.ConclusionThe electrode's geometric parameters affect the effectiveness and safety of the RF product. This study has provided the simulation procedure for the electrode design.
What problem does this paper attempt to address?