Microstructural design for achieving high performances in Ti-V-Al lightweight shape memory alloys by optimizing Zr content

Xiaoyang Yi,Lijie Sheng,Guoqiang Fu,Bin Sun,Bowen Huang,Kuishan Sun,Xianglong Meng,Zhiyong Gao,Shangzhou Zhang,Haizhen Wang

DOI: https://doi.org/10.1016/j.matchar.2023.113283

IF: 4.537

2023-01-01

Materials Characterization

Abstract:In the present study, the quaternary Zr element was introduced to replace Ti in Ti-V-Al based shape memory alloys. The addition of Zr element resulted in the microstructural features of Ti-V-Al based shape memory alloys, such as the phase evolution of αˊˊ → β, the precipitation of C14-type Laves phase, reduction of grain size etc. Moreover, the two-stage martensitic transformation corresponding to ω → β and αˊˊ → β transformation gradually evolved into single ω → β martensitic transformation during heating process in Ti-V-Al based shape memory alloys, as Zr content was increased from 0.5 at.% to 5.0 at.%, which was firstly reported in Ti-V-Al based shape memory alloys. Meanwhile, the martensitic transformation temperatures of Ti-V-Al based shape memory alloys were decreased with Zr increasing. By optimizing Zr content, the highest yield strength and largest microhardness can be gained in Ti-V-Al based shape memory alloy with controlling 5.0 at.% Zr, as a result of solution strengthening, grain refinement and precipitation strengthening. Besides, the moderate Zr content caused the precipitation of C14-type Laves phase and formed the quasi-continuous network structure, which contributed to the superior elongation. And the perfect fracture ductility with an elongation of 40% in the present Ti-V-Al based shape memory alloys with 3.0 at.% Zr was significantly larger than that the other reported Ti-V-Al based shape memory alloys. Moreover, the superior strain recovery characteristics with a fully recoverable strain of 4% can be achieved in Ti-V-Al based shape memory alloys through controlling 3.0 at.% Zr.