Abstract:Ti-13 V-3Al (at%) high temperature shape memory alloy was considered attractive material due to its low density. The demand for the better shape memory performance is proposed to widen the scope of application. In the present study, Ti-13 V-3Al is processed by high-pressure torsion and annealing. The microstructure, martensitic transformation and mechanical properties were investigated. The severe plastic deformation introduced high density defects and decreased the stability of the alpha" phase. The phase constitution is the sole beta phase after high-pressure torsion, which was related to the Gibbs-Thomson effect. After the annealing treatment at 700 degrees C, numerous small parallel alpha" martensite variants were observed, which was affected by the residual defects. More nucleation sites were provided, resulting that the reverse martensitic transformation was accomplished in a narrow temperature range. Moreover, the formation of (111) type I twinning become easier due to the assistance of the (111) stacking faults. The alpha" martensite variants became larger and evolved to the V-shaped and the triangular self-accommodated morphologies as the annealing temperature increased to 800 degrees C. The twinning relationship in the different annealing temperature both were the (111) type I twinning. The properties were characterized by the tensile loadingunloading tests and microhardness tests. The shape memory effect was optimized and 4% full recoverable strain was obtained in the alloy annealed at 700 degrees C. The apparent hardness decreased from 323HV and 263HV as the annealing temperature raised from 700 degrees C to 800 degrees C. (C) 2021 Elsevier B.V. All rights reserved.

Martensitic transformation and shape memory effect of Ti–V–Al lightweight high-temperature shape memory alloys

Martensitic Transformation and Shape Memory Behavior of Ti-V-Al-Fe Lightweight Shape Memory Alloys

Martensitic transformations and the shape memory effect in Ti-Zr-Nb-Al high-temperature shape memory alloys

The Microstructure and Martensitic Transformation of Ti-13V-3Al Light Weight Shape Memory Alloy Deformed by High-Pressure Torsion

Martensitic Transformation and Shape Memory Effects in Co-V-Al Alloys at High Temperatures

The microstructure and martensitic transformation of Ti–V–Al–B elevated temperature shape memory alloy tailored by thermo-mechanical treatment

Microstructure and Mechanical Properties of Ti–V–Al–Cu Shape Memory Alloy by Tailoring Cu Content

Microstructural design for achieving high performances in Ti-V-Al lightweight shape memory alloys by optimizing Zr content

Simultaneous enhancement of strength and ductility in quaternary Ti–V–Al–B light weight shape memory alloys with high transformation temperature

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Effect of Ti/Ni and Hf/Zr ratio on the martensitic transformation behavior and shape memory effect of TiNiHfZr alloys

Phase transformation behaviors and shape memory effects of TiNiFeAl shape memory alloys

Insights into the Martensitic Transformation Kinetics and Mechanical Properties of Quaternary Ti–Ni–Nb–V Shape Memory Alloys

The evolution of microstructure, martensitic transformation and mechanical properties in Ti–V–Al-based shape memory alloys with changing annealing temperatures

Shape Memory Behavior in Ti–Zr Alloys

Thermal Stability and High-Temperature Shape Memory Effect of Ti–Ta–Zr Alloy

A New Type of Cu–Al–Ta Shape Memory Alloy with High Martensitic Transformation Temperature

Microstructure and transformation behavior of Ni54Mn 25Ga15Al6 high-temperature shape memory alloy

Martensitic transformation and shape memory effect of Ni49.6Ti45.4Ta5 shape memory alloy

Effect of y addition on the martensitic transformation and shape memory effect of Ti-Ta high-temperature shape memory alloy

Martensitic Transformation, Shape Memory Effect and Superelasticity of Ti–xZr–(30–x)Nb–4Ta Alloys