Abstract:Physical fouling characteristics on silicon carbide (SiC) membranes induced by various organic matter compounds vary depending on the presence of calcium ions (Ca2+). Both destructive techniques (morphological surface analysis) and non-destructive techniques (fouling properties monitoring) were used to determine the fouling mechanisms and behavior during the membrane filtration systems. Destructive analysis and a modified Hermia model were employed to assess the fouling mechanisms. Fouling behavior was also analyzed through non-destructive monitoring techniques including optical coherence tomography (OCT) and three-dimensional laser scanning confocal microscopy (3D-LSM). At concentrations of 10, 30, and 100 mg/L without Ca2+, the flux decreased by 57-95% for humic acid (HA) and anionic polyacrylamide (APAM). APAM exhibited a notable removal rate of up to 56% without Ca2+. At concentration of 10, 30, and 100 mg/L in the absence of Ca2+, the flux decreased by 6-8% for sodium alginate (SA). However, the addition of Ca2+ led to a reduction in the flux for SA by up to 91% and resulted in a removal rate of 40%. Furthermore, addition of Ca2+ led to an alteration of the fouling characteristics of HA and SA. In the case of HA, higher concentrations resulted in elevated thickness and roughness with correlation coefficients of 0.991 and 0.992, respectively. For SA, increased SA concentration led to a thicker (correlation coefficient of 0.999) but smoother surfaces (correlation coefficients of 0.502). Monitoring of these physical characteristics of the fouling layer through non-destructive analysis is crucial for effective fouling management, optimization of the system performance and extending the lifespan of the membrane. By continuously assessing the fouling layer thickness and surface roughness, we expect to be able to provide insights on the fouling behavior, identify trends, that can help scientists and engineers to make informed decisions regarding fouling control strategies in future.

Investigation on Nanofiltration Membrane Fouling Behaviour of Cation-Induced Apam in Strontium-Bearing Mine Water

Study of the Fouling Behavior of Typical Inorganic-Organic Foulants in Silicates-Bearing Mine Wastewater on Reverse Osmosis Membrane

Comparative Analysis of Membrane Fouling Mechanisms Induced by Colloidal Polymer: Effects of Sodium and Calcium Ions.

Discrepant effects of monovalent cations on membrane fouling induced by colloidal polymer: Evaluation and mechanism investigation

Insights into iron induced fouling of ion-exchange membranes revealed by a quartz crystal microbalance with dissipation monitoring

Effects of Calcium Ions on Anionic Polyacrylamide Fouling of Ion-Exchange Membranes in Desalination of Polymer-Flooding Wastewater by Electrodialysis

Assessment of SMP Fouling by Foulant–membrane Interaction Energy Analysis

New Mechanistic Insights into the Effect of Cations on Membrane Fouling Caused by Anionic Polyacrylamide.

Combined effects of organic matter and calcium on biofouling of nanofiltration membranes

Influence of salts, anion polyacrylamide and crude oil on nanofiltration membrane fouling during desalination process of polymer flooding produced water

Behaviours and mechanisms of nanofiltration membrane fouling by anionic polyacrylamide with different molecular weights in brackish wastewater desalination

Membrane fouling in engineering nanofiltration process for drinking water treatment: The spatial and chemical aspects

Investigation of Combined Fouling Behavior in Nano-Filtration Process under Various Feed Conditions

FOULING MECHANISM OF SiO_2/PVDF ION-EXCHANGE MEMBRANES FOULED BY ANIONIC POLYACRYLAMIDE

New insights into the influence of pre-oxidation on membrane fouling during nanofiltration of brackish water considering inorganic-organic complexation and oxidant reduction byproducts

Revelation of the Interaction Between Aluminum Coagulants and Natural Organic Matters in the Dual-System During Nanofiltration Membrane Scaling

Molecular-level Insights into the Mitigation of Magnesium-Natural Organic Matter Induced Ultrafiltration Membrane Fouling by High-Dose Calcium Based on DFT Calculation.

Non-destructive monitoring and prediction of fouling by organic matters and residual anionic coagulant during membrane process

Quantitative Assessment of Interfacial Interactions Governing Ultrafiltration Membrane Fouling by the Mixture of Silica Nanoparticles (SiO2 NPs) and Natural Organic Matter (NOM): Effects of Solution Chemistry

Probing the roles of Ca2+ and Mg2+ in humic acids-induced ultrafiltration membrane fouling using an integrated approach

Effects of UV/Fe(II)/sulfite pre-treatment on NOM-enhanced Ca2+ scaling during nanofiltration treatment: Fouling mitigation, mechanisms, and correlation analysis of membrane resistance