Abstract:Flow chemistry has greatly expanded the reaction toolbox by demonstrating a wide range of individual chemical transformations. For commercial scale processes, it provides an appealing alternative to batch reactors by reducing production costs, increasing product yield and overall process robustness. We describe an approach for continuous processing of a specialty chemical manufactured using a batch process with a typical yield of 150 kg per hour and concomitant adiabatic temperature increase of up to 250 °C. This necessitates controlled feed addition causing longer processing time, lower productivity, and undesirable polymerization reactions. We present a continuous process that addresses the challenges of thermal management and reaction selectivity using flow chemistry thereby enabling up to 12-fold reduction in residence time with a comparable product profile. Fundamental reactor engineering and design principles and associated safety considerations used for designing the reactor and continuous process are described. Guided by this analysis, a continuous process using a 1⁄4 inch tubular reactor is investigated. The results indicate residence time reduction from 6 hours to 30 minutes for comparable feed conversion of 87% and similar product composition. Greater than 90% conversion could not be achieved in the current reactor configuration and associated reactor runaway analysis suggests feed decomposition due to pressure fluctuations or insufficient reactants in the reactor. The analysis highlights the need for designing a reactor with better pressure control using a back pressure regulator and choosing a smaller diameter tube. These insights underscore the importance of applying fundamental reactor engineering principles for designing safe and efficient processes at an industrial scale.

Continuous flow fluorination facilitated by KF assisted by water: From batch to continuous flow

A safe and efficient process for the preparation of difluoromethane in continuous flow

Continuous flow technology-a tool for safer oxidation chemistry

Recent advances in fluorine chemistry using flow technology

Multiphase minireactor system for direct fluorination of ethylene carbonate

Process Intensification for Enhanced Fluoride Removal and Recovery as Calcium Fluoride Using a Fluidized Bed Reactor

Application of Stop-Flow Micro-Tubing Reactor System in Organic Reaction Development

Dehydrochlorination of -chlorohydrin in continuous microflow system: Reaction kinetics and process intensification

Rapid (Deuterio)difluoromethylation of Heteroatoms using R‐22 Gas: A Demonstration of Flow Chemistry in Suppressing Intrinsic Reaction Pathways

Liquid metal enabled continuous flow reactor: A proof-of-concept

Continuous Flow Synthesis of Zeolites

Continuous-flow system for loading and refining metal-supported nanofibers toward scalable production

An efficient and green pathway for continuous Friedel-Crafts acylation over α-Fe2O3 and CaCO3 nanoparticles prepared in the microreactors

A Continuous Flow Process for the Defluorosilylation of HFC-23 and HFO-1234yf

Continuous-flow Synthesis of the Liquid Crystal Intermediate 1-(4-ethoxy-2,3-difluorobenzyl)-4-propylcyclohexan-1-ol in a Microfluidic System: Experimental and Numerical Studies

High-Speed Circulation Flow Platform Facilitating Practical Large-Scale Heterogeneous Photocatalysis

Beyond Organometallic Flow Chemistry: The Principles Behind the Use of Continuous-Flow Reactors for Synthesis

Continuous Polyol Synthesis of Metal and Metal Oxide Nanoparticles Using a Segmented Flow Tubular Reactor (SFTR)

Application of a simple rule for the design of micro- or meso-scale cooled reactors in a heat transfer limited regime

Continuous Synthesis and Processing of Covalent Organic Frameworks in a Flow Reactor