Abstract:In the last decade flow reactors for material synthesis were firmly established, demonstrating advantageous operating conditions, reproducible and scalable production via continuous operation, as well as high-throughput screening of synthetic conditions. Reactor fouling, however, often restricts flow chemistry and the common fouling prevention via segmented flow comes at the cost of inflexibility. Often, the difficulty of feeding reagents into liquid segments (droplets or slugs) constrains flow syntheses using segmented flow to simple synthetic protocols with a single reagent addition step prior or during segmentation. Hence, the translation of fouling prone syntheses requiring multiple reagent addition steps into flow remains challenging. This work presents a modular flow reactor platform overcoming this bottleneck by fully exploiting the potential of three-phase (gas-liquid-liquid) segmented flow to supply reagents after segmentation, hence facilitating fouling free multi-step flow syntheses. The reactor design and materials selection address the operation challenges inherent to gas-liquid-liquid flow and reagent addition into segments allowing for a wide range of flow rates, flow ratios, temperatures, and use of continuous phases (no perfluorinated solvents needed). This "Lego®-like" reactor platform comprises elements for three-phase segmentation and sequential reagent addition into fluid segments, as well as temperature-controlled residence time modules that offer the flexibility required to translate even complex nanomaterial synthesis protocols to flow. To demonstrate the platform's versatility, we chose a fouling prone multi-step synthesis, i.e., a water-based partial oxidation synthesis of iron oxide nanoparticles. This synthesis required I) the precipitation of ferrous hydroxides, II) the addition of an oxidation agent, III) a temperature treatment to initiate magnetite/maghemite formation, and IV) the addition of citric acid to increase the colloidal stability. The platform facilitated the synthesis of colloidally stable magnetic nanoparticles reproducibly at well-controlled synthetic conditions and prevented fouling using heptane as continuous phase. The biocompatible particles showed excellent heating abilities in alternating magnetic fields (ILP values >3 nH m2 kgFe-1), hence, their potential for magnetic hyperthermia cancer treatment. The platform allowed for long term operation, as well as screening of synthetic conditions to tune particle properties. This was demonstrated via the addition of tetraethylenepentamine, confirming its potential to control particle morphology. Such a versatile reactor platform makes it possible to translate even complex syntheses into flow, opening up new opportunities for material synthesis.

Multiphase minireactor system for direct fluorination of ethylene carbonate

Deactivation Kinetic Study on Vapor Phase Beckmann Rearrangement of Cyclohexanone Oxime and Design of the Multi-Layer Inclined Channel Bionic Reactor

A safe and efficient process for the preparation of difluoromethane in continuous flow

Millistructured Coiled Flow Inverter for Biphasic Continuous Flow 5‐Chloromethylfurfural Synthesis

Direct 'in Situ', Low Voc, High Yielding, Co2 Expanded Phase Catalytic Chain Transfer Polymerisation: Towards Scale-Up

Accelerating Electrochemical Reactions in a Voltage‐Controlled Interfacial Microreactor

Dehydrochlorination of -chlorohydrin in continuous microflow system: Reaction kinetics and process intensification

Continuous-Flow Synthesis of an Important Liquid-Crystal Intermediate Using a Microreaction System

Difluoro-and Trifluoromethylation of Electron-Deficient Alkenes in an Electrochemical Microreactor

The scale-up of microwave flow syntheses by recirculation; The chlorine-free preparation of alkyl phenyl-H-phosphinates

Continuous flow fluorination facilitated by KF assisted by water: From batch to continuous flow

Easy-to-perform and cost-effective fabrication of continuous-flow reactors and their application for nanomaterials synthesis

Gas–Liquid Mass Transfer Intensification for Selective Alkyne Semi-Hydrogenation with an Advanced Elastic Catalytic Foam-Bed Reactor

Usage of CoOOH electrodes in a flow channel reactor for the non-alkaline oxidation of 5-(hydroxymethyl)-furfural: an upscaling study

Effective Phosphorylation of 2,2′-Methylene-bis(4,6-di- tert -butyl) Phenol in Continuous Flow Reactors

Design and Development of Novel Continuous Flow Stirred Multiphase Reactor: Liquid–Liquid–Liquid Phase Transfer Catalysed Synthesis of Guaiacol Glycidyl Ether

Scalable Thin-Layer Membrane Reactor for Heterogeneous and Homogeneous Catalytic Gas–liquid Reactions

A versatile non-fouling multi-step flow reactor platform: demonstration for partial oxidation synthesis of iron oxide nanoparticles

Facile catalyst separation without water: fluorous biphase hydroformylation of olefins

Continuous-flow Synthesis of the Liquid Crystal Intermediate 1-(4-ethoxy-2,3-difluorobenzyl)-4-propylcyclohexan-1-ol in a Microfluidic System: Experimental and Numerical Studies

Scalable Wolff–Kishner Reductions in Extreme Process Windows Using a Silicon Carbide Flow Reactor