Abstract:In this paper, local flame and flow properties of propagating premixed turbulent propane/air flames were derived by two-dimensional time-resolved Mie scattering and PIV methodology in a MICCA-type annular combustor. The curvature of flame front, local flame speed and the evolution of leading points during the light-round process were analyzed in detail. All experiments were performed under a constant equivalence ratio of 0.67, with the bulk flow velocity set from 1.95 to 5.85 m/s in five cases to achieve different turbulent intensities. The instantaneous flame fronts and velocity fields of unburned gases were measured to investigate the flame-flow interactions corresponding to four regions of the annular combustor. The results indicate that the slight asymmetry of the propagation in two flame branches is mainly due to the competition between the local swirling injection and the overall circumferential flow along the inner or outer parts of the combustor. Based on the statistical analysis of the local radius of flame curvature, the whole flame front tends to be convex to the unburned mixture. As a characteristic length scale, the inner-cutoff scale epsilon(i) of the flame front is about 2-3 times the flame thickness delta(L), which decreases with the increase of turbulent intensity. The value of fractal dimension increases with the increase of turbulence intensity, and its value is about 2.15-2.25 for all cases. Besides, in order to analyze the flame properties during the ignition process, the local flame speed w(n) was calculated using statistical method as well as the velocity of unburned mixture gas. Moreover, the experimental results (U-b =3.90 m/s) of the leading points' trajectory were consistent with the large-eddy simulations at the height of h =25 mm, and the leading points of the flame fronts were generally concentrated near (about 5 mm away) the inner tube for both flame branches. The researches of ignition mechanisms in annular combustors have been carried out for almost ten years, but the quantitative measurements of flow and flame fronts are barely reported. Motivated by this, it will provide new insights into the ignition process in annular combustors from this work. (C) 2021 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Numerical Study of Flame Characteristics in a Reduced-Diameter Vortex Combustor

Local Flame And Flow Properties Of Propagating Premixed Turbulent Flames During Light-Round Process In A Micca-Type Annular Combustor

Experimental and Numerical Study of a Two-Stage Swirl Burner

Experimental and numerical investigation of the combustion behavior in a conical vortex combustor

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

Experimental and Numerical Study on Temperature Variation and Air Flow Distribution in Trapped Votex Combustor

Experimental and Numerical Investigation on Flame Pattern Formations of Non-Premixed CH4 and Air in a Planar Micro-Combustor

Experiment and Simulation Study on Lean Blow-Out of Trapped Vortex Combustor with Various Aspect Ratios

Numerical Simulation and Flame Characteristics Analysis of Non-Premixed Swirling Combustion

Effect of Swirl Field on the Fuel Concentration Distribution and Combustion Characteristics in Gas Turbine Combustor with Cavity

Experimental investigations on central vortex core in swirl spray flames using high-speed laser diagnostics

Experimental And Numerical Investigations Of Low-Swirl Multi-Nozzle Combustion In A Lean Premixed Combustor

Ignition, lean blowout, and flame propagation in a combustor using flameholder with a trapped vortex cavity

Experimental study of stratified swirl flame dynamics in a model gas turbine combustor

A Numerical Study on Diffusion H2/air Flames in Y-shaped Mesoscale Combustors

Investigation on Non-Premixed Swirling Flame in A Multi-Hole Burner

Numerical and Experimental Assessment of a Novel Multinozzle Burner with CO2 Diluent to Improve the Emissions from a Swirling Flame in a Combustion Chamber

Numerical Investigation on Performance of Axisymmetric Variable Geometry Scramjet Combustor Equipped with Strut Flame Holder

Numerical and Experimental Investigation of a Non-Premixed Double Swirl Combustor

Direct Numerical Simulation and Analysis of a Hydrogen/air Swirling Premixed Flame in a Micro Combustor

Emission Characteristics And Axial Flame Temperature Distribution Of A Circumferential Reverse Flow Combustor