Abstract:For the sake of safety evaluation of concrete structures under dynamic loading conditions, the rate dependences of concrete fracture parameters are necessary to be elucidated rationally first. Therefore, the aim of this study is to develop a fracture model for determining the size-independent tensile strength (ft), the fracture toughness (KIC) and the fracture energy (GF) under different loading rates. The fracture mechanism was analyzed comprehensively using three-point bending tests on concrete beams with varied depths (h) and ratios of the initial crack length to the beam depth (a0/h). As the loading rate increases, the number of fractured coarse aggregates is increased, and the shape of the load-displacement curve around the maximum fracture load (Fmax) becomes sharper. Subsequently, a fracture model was proposed to predict the size-independent parameters ft, KIC and GF by incorporating the average aggregate size (davg) and a discrete coefficient (beta) to indicate material heterogeneity and discontinuity, respectively. The critical effective crack length (Delta ac) was discretized and quantified as davg multiplied by beta. Closed-form solutions of ft, KIC and GF were obtained using Fmax based on the boundary effect model. ft, KIC and GF can be explicitly predicted after determining Fmax from the fracture tests, and were generally irrelevant to h and a0/h under individual loading rates, indicating their size-independence. The scatters in the ft, KIC and GF values were determined using a statistical analysis. The rate dependences of the fracture parameters were clarified quantitatively through elucidating the variations in ft, KIC and GF with respect to the loading rate. Moreover, the predicted fracture parameters based on the proposed model were insensitive to the possible variations of davg and beta. This study brings a new insight into the fracture behaviors of concrete under different loading rates and provides scientific guidance for the disaster prevention of concrete structures.

An Analytical Model for Determining Realistic Tensile Strength and Fracture Toughness of Fired Clay Bricks

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

Investigation of Axial Tensile Fracture Performance of Recycled Brick Coarse Aggregate Concrete Using a Cohesion Model

Fracture Model for Predicting Tensile Strength and Fracture Toughness of Concrete under Different Loading Rates

Dynamic Tensile Properties of Clay Bricks

Fracture Toughness Analysis of Interlocked Brick and Mortar Structure Considering the Anisotropic Behavior

An analytical model to predict the effective fracture toughness of concrete for three-point bending notched beams

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

Prediction of Brickwork Failure Using Discrete-Element Method

A Crack-Bridging Model of Brick and Mortar Architecture Considering the Anisotropic Property

Closed-form Solution for Predicting Tensile Strength and Fracture Toughness of Ultra-High-performance Concrete

Modeling and evaluation of the fracture resistance of alkali-resistant glass fibre reinforced concrete under different loading rates

Study on the mechanical behavior of millennium-ancient bricks based on microscopic characteristics

Analysis on Thermomechanical Characteristics of Refractory Brick Structure with Different Material Properties and Structure Parameters in Incinerators

Experimental studies on the dynamic compressive and tensile strength of clay brick under high strain rates

Prediction of Fracture Toughness of Magnesia-Carbon Bricks Based on Fractography

Comprehensive tests and quasi-brittle fracture modeling of light-weight foam concrete with expanded clay aggregates

Analysis of Chinese ancient brick masonry characteristics under uniaxial compression fatigue loading

A PRACTICAL ANALYTICAL METHOD TO SOLVE EQUIVALENT FRACTURE TOUGHNESS OF CONCRETE BASED ON FICTITIOUS CRACK MODEL

Probabilistic Relation Between Stress Intensity and Fracture Toughness in Ceramics

A Predictive Model to Determine Tensile Strength and Fracture Toughness of 3D Printed Fiber Reinforced Concrete Loaded in Different Directions