Abstract:The extractive membrane bioreactor (EMBR) system combining a membrane process and a biological process has been developed to extract and biodegrade recalcitrant organic pollutants in wastewater. Removal of the organics such as phenol by EMBR requires an effective membrane to selectively extract the organic compounds while rejecting water and other harsh inorganic components. In this work, novel composite membranes consisting of a highly porous substrate, made by tiered polyvinylidene fluoride (PVDF) nanofibers with ultrafine nanofibers on top (61 +/- 12 nm in diameter), and a dense polydimethylsiloxane (PDMS) "selective layer have been fabricated. We have investigated (1) the effect of the pore size of PVDF nanofibrous substrates, (2) the effect of PDMS preparation method, and (3) the effect of prewetting agent on the resultant composite membranes' morphologies, mechanical properties, and phenol removal performance. Compared with the symmetric substrate with a nanofiber diameter of 129 13 nm, the tiered substrate can effectively support a uniform and defect-free PDMS coating. This is attributed to the smaller surface pore size of the tiered substrate as a result of its top ultrafine nanofibers. Besides, the use of partially precross-linked PDMS coating solution with increased viscosity and 50 wt % glycerol aqueous solution as the prewetting agent to fill the substrate pores is preferred in order to mitigate PDMS intrusion. On the basis of the resistance model, the overall membrane resistance decreases with the decrease of the PDMS intrusion level, giving rise to a higher overall mass transfer coefficient, k(0), for phenol removal. With the above mentioned factors being taken into account, the first PDMS-coated PVDF nanofibrous composite membrane has been developed to remove phenol with a high k(o) (over 4 times higher than the existing commercial PDMS tubular membrane) for EMBR. This study provides insights and guidelines for fabricating highly efficient membranes for organic removal in the EMBR process.

Hydrophobically Functionalized MIL-101/PEBA/PVDF Composite Membranes for Phenol Recovery by Pervaporation

Fabrication of PEBA/HZIF-8 Pervaporation Membranes for High Efficiency Phenol Recovery.

Enhancing the pervaporation performance of PEBA/PVDF membrane by incorporating MAF-6 for the separation of phenol from its aqueous solution

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Boosting pervaporation performance of polyether block amide membranes by embedding structural-evolution zeolitic imidazolate framework-71s for phenol/water separation

Coordinate covalent grafted ILs-modified MIL-101/PEBA membrane for pervaporation: Adsorption simulation and separation characteristics

Preparation of Polydimethylsiloxane–Polyvinylidene Fluoride Composite Membranes for Phenol Removal in Extractive Membrane Bioreactor

Application of a biodegradable poly(butylene adipate-co-terephthalate) membrane for phenol pervaporation recovery

Recycling of Phenol from Aqueous Solutions by Pervaporation with ZSM-5/PDMS/PVDF Hollow Fiber Composite Membrane

Zeolitic imidazolate frameworks in mixed matrix membranes for boosting phenol/water separation: Crystal evolution and preferential orientation

Fabrication of highly selective PEBA mixed matrix membranes by incorporating metal-organic framework MIL-53 (Al) for the pervaporation separation of pyridine-water mixture

Hybrid Membranes of Hpea@pvdf for Molecular Recognition and Separation of Phenols and Anilines

Development of High Performance Nanofibrous Composite Membranes by Optimizing Polydimethylsiloxane Architectures for Phenol Transport

Enhanced PEBA composite membrane performance by solution-free melt coating for phenol pervaporation from aqueous solution

Polybenzimidazole (PBI) Membranes for Phenol Dehydration Via Pervaporation

Separating 2-Phenylethanol from Aqueous Solution by Mixed Matrix Composite Membranes Based on Beta-Cyclodextrin Metal Organic Frameworks

Pervaporation performance of surface-modified zeolite/PU mixed matrix membranes for separation of phenol from water

Treatment of highly-concentrated phenol wastewater with an extractive membrane reactor using silicone rubber

Synergism induced intensification for the recovery of phenolic compounds using polymer inclusion membranes containing binary mixed carriers

New Hybrid Membrane Based on Poly(m-phenylene-iso-phthalamide) for Pervaporation of Methanol/n-Heptane Azeotropic Mixture

Application of polyurethane membrane with surface modified ZSM-5 for pervaporation of phenol/water mixture