Treatment of highly-concentrated phenol wastewater with an extractive membrane reactor using silicone rubber

Min Xiao,Jiti Zhou,Yue Tan,Aili Zhang,Yuanhua Xia,Lei Ji
DOI: https://doi.org/10.1016/j.desal.2005.12.006
IF: 11.211
2006-01-01
Desalination
Abstract:Application of membrane extraction process to the removal of phenol from its aqueous solution was investigated. The ability of poly (dimethylsiloxane), i.e. PDMS and poly (methyl vinyl) siloxane (PVMS) in the membrane extraction of water–phenol mixtures was compared. It was found that PDMS was more suitable for the operation under strong base condition. PDMS and sodium hydroxide solution were applied in the process. The effects of feed flow rate, phenol concentration, temperature and pH in the stripping solution and ionic strength on the process were studied. The effects of liquid flow status and system temperature on the membrane surface on the overall mass transfer coefficient (OMTC) and the permeability for phenol through the membrane were also discussed. The experimental results showed that the phenol removal efficiency was over 95% under the conditions of a flow rate 2.0 l·d–1, phenol >5000 mg·l–1, at 323.2 K and pH 13.0. OMTCs increased with increasing salt concentration. The order of OMTC was 10–7 m·s–1, and the experimental data was agreement with the Arrhenius relationship for the temperature dependence of the permeability of phenol through the polymer.
What problem does this paper attempt to address?