Abstract:The DarkSHINE experiment aims to search for dark photons by measuring the energy loss of the electrons recoiled from fixed-target. Its electromagnetic calorimeter is primarily responsible for accurately reconstructing the energy of the recoil electrons and bremsstrahlung photons. The performance of the electromagnetic calorimeter is crucial, as its energy measurement precision directly determines the sensitivity to the search for dark photons. The DarkSHINE electromagnetic calorimeter uses LYSO crystals to form a fully absorptive electromagnetic calorimeter. It utilizes SiPMs to detect scintillation light in the crystals, and its readout electronics system deduces the deposited energy in the crystals by measuring the number of photoelectric signals generated by the SiPMs. The DarkSHINE electromagnetic calorimeter aims to operate at an event rate of 1-10 MHz, detecting energies ranging from 1 MeV to 1 GeV. To meet the requirements of high energy measurement precision, high event rate, and large dynamic range, we have researched and designed a readout electronics system based on dual-channel high-speed ADCs and a customized DAQ. The front-end amplification part of this system uses low-noise trans-impedance amplifiers to achieve high-precision waveform amplification. It successfully achieves a dynamic range up to a thousandfold through a double-gain readout scheme. The digital part uses 1 GSPS high-speed ADCs to achieve non-dead-time, high-precision waveform digitization. The DAQ part uses JESD204B high-speed serial protocol to read out the signal from ADC, and transmit it to PC software for processing and storage. Test results show a signal-to-noise ratio greater than 66 dBFS and an ENOB greater than 10.6 bits. Energy spectra measurements have been conducted using LYSO crystals and SiPMs, and an energy resolution of 5.96% at the 2.6 MeV gamma peak of Th-232 has been achieved.

Performance of AC-LGAD Strip Sensors Designed for the DarkSHINE Experiment

Performance of AC-LGAD strip sensor designed for the DarkSHINE experiment

Design of High-speed readout electronics for the DarkSHINE electromagnetic calorimeter

Design of a LYSO Crystal Electromagnetic Calorimeter for DarkSHINE Experiment

Results for pixel and strip centimeter-scale AC-LGAD sensors with a 120 GeV proton beam

The Performance of AC-coupled Strip LGAD developed by IHEP

Measurements of an AC-LGAD strip sensor with a 120 GeV proton beam

A Design of Hadronic Calorimeter for DarkSHINE Experiment

Development of the strip LGAD detector with double-end readout for future colliders

DarkSHINE Baseline Design Report: Physics Prospects and Detector Technologies

Design of AC-coupled Low Gain Avalanche Diodes (Ac-Lgads): a 2D TCAD Simulation Study

Design and testing of LGAD sensor with shallow carbon implantation

Long-Distance Signal Propagation in AC-LGAD

The performance of large-pitch AC-LGAD with different N+ dose

Prospective Study of Light Dark Matter Search with a Newly Proposed DarkSHINE Experiment

Design of Prototype Front-end Digital Module for Direct Dark Matter Detection based on LAr

Characterization of iLGADs using soft X-rays

Time-resolved synchrotron light source X-ray detection with Low-Gain Avalanche Diodes