Abstract:Radiation heat transfer is the dominant model of heat transfer in the large scale industry boiler, especially in oxy-fuel combustion condition. Radiative properties of combustion gases and char oxidation in the oxy-fuel condition are obviously different from the air-fuel combustion, due to the N-2 replaced by CO2. Through researchers proposed many helpful correlations based on the air-fuel Weighted-Sum-of-Grey Gases-Model (WSGGM), the absorption coefficients were commonly constant or correlations were discrete by the classical molar ratio of H2O to CO2 (MR), which were mismatching the continuous value of MR in the real furnace. Meanwhile, the discrete MR is also not applied to the computational fluid dynamics (CFD). In this paper, new correlations for the WSGGM are determined as polynomial function of MR and temperature, which can be conveniently employed in Fluent by the form of user-defined-functions in C language. Parameters of model are fitted by total emittances calculated based on the timely HITEMP 2010 database. New correlations are validated by comparing the emittances with line-by-line calculations and other classical models. New correlations are employed in the CFD for the real industrial oxy-fuel combustion with the temperature range of 400-2600K, pressure path-length between 0.01 and 60 bar m. Several assumed test cases have been investigated to evaluate the accuracy of the models. Modified correlations for WSGGM give a better accuracy of the total emittances for the mixed combustion gases in the real furnace. New models including radiative and chemical reaction mechanisms have been employed to CFD modeling of combustion process for a tangentially fired 300MWe utility boiler. The industrial boiler is modeled by a partition meshing method with the hexahedral structured mesh. Due to the atmosphere shift from N-2 to CO2, three aspects are essential to be modified for oxy-fuel: radiation model, char oxidation model and homogeneous volatile oxidation model. To investigate the performance of the furnace, air-fuel combustion selected as the conference, three other cases employed are defined as Oxy21 (vol21%, O-2), Oxy26 (vol26, 02) and Oxy29 (vol29%, O-2), respectively. Temperature profile and heat transfer are investigated for the different test cases. Meanwhile, the simulation and calculation heat transfer in the furnace are also compared. The results show the new modified simulation has an approximate 4-11% lower than the thermodynamic calculation. To achieve an identical heat flux and temperature distributions with the air-fuel case, the molar fraction 29% of O-2 is essential for the selected implementation. (CSPE)

A Machine Learning Based Model for Gray Gas Emissivity and Absorptivity of H2O-CO2-CO-N2 Mixtures

A Machine Learning Based Model for Gray Gas Emissivity and Absorptivity of H2O-CO2-CO-N

A machine learning based model for gray gas emissivity and absorptivity of H 2 O-CO 2 -CO-N 2 mixtures

On the calculation of line-by-line absorption coefficients for gas mixtures using machine learning method

New WSGG Model for Gas Mixtures of H2O, CO2, and CO in Typical Coal Gasifier Conditions

Radiative Models For Hot Gas With Various H2o-Co2 Ratios

New Weighted Sum of Gray Gases (WSGG) Models for Radiation Calculation in Carbon Capture Simulations: Evaluation and Different Implementation Techniques

WSGG Models for Radiative Heat Transfer Calculations in Hydrogen and Hydrogen-Mixture Flames at Various Pressures

New gas radiation model based on the principle of weighted sum of gray gases. Application to CO2–H2O mixtures at high temperature

Evaluation of Spectral Line Mixing Models and the Effects on High Pressure Radiative Heat Transfer Calculations

A novel full spectrum correlated k -distribution model based on multiband fusion artificial neural network for gas absorption coefficient prediction

New Correlations Of Weighted Sum Of Grey Gases Model Applicable To Computational Fluid Dynamics For Oxy-Fuel Combustion And Implementation

New coefficients of the weighted-sum-of-gray-gases model for gas radiation characteristics of hydrogen/natural gas blends combustion

Nongray models for radiative absorption and anisotropic scattering by water droplets in fire CFD simulations

A Gas Absorption Parameterization Model for Hyperspectral Shortwave Radiative Transfer Computations

Comparative Machine Learning Frameworks for Forecasting CO2/CH4 Competitive Adsorption Ratios in Shale

New Multi-Parametrical Pressurized WSGG Model Correlations for Gaseous Radiative Heat Transfer in High H2O/CO2 Molar Ratio Conditions for Sustainable Fuel Utilization

New multi-parametrical pressurized WSGG model correlations for gaseous radiative heat transfer in high H 2 O/CO 2 molar ratio conditions for sustainable fuel utilization

Precise Prediction of Methane-Ethane Adsorption in Shale Nanopores Using Multi-Component Models and Machine Learning

A machine learning based line-by-line absorption coefficient model for the application of atmospheric carbon dioxide remote sensing

Machine Learning-Assisted Soot Temperature and Volume Fraction Fields Predictions in the Ethylene Laminar Diffusion Flames.