Abstract:Abstract Polymer coatings are commonly used to protect carbon steels from corrosion but they are susceptible to weathering and many of them have environmental concerns. Therefore, we studied the possibility of an environmentally favorable inorganic magnesium phosphate cement (MPC) coating for protecting mild steel. A formulation suitable for coating steel was developed by compositional modification [i.e., incremental replacement of dead-burned magnesia (MgO) with magnesium hydroxide (Mg(OH) 2 )] to a road-repair MPC. This modification yielded an acceptable working time and prevented pore formation at the coating-steel interface. Corrosion monitoring by linear polarization and electrochemical impedance spectroscopy for 14 days found that, the MPC coating substantially increased the linear polarization resistance (R p ) [e.g., day 1: (8.2 ± 1.7) × 10 3 (nadir value) vs. 495 ± 55 Ω cm −2 ] and charge transfer resistance (R ct ) (e.g., day 1: 9.3 × 10 3 vs. 3.8 × 10 2 Ω cm −2 ). The coated steel underwent neutral sodium chloride (NaCl) salt spray for 2400 h without visible rusting. Immersion for 24 h in liquids simulating the pore fluid indicated that, passivation by the excess MgO in the coating was a major contributor to its anti-corrosive property. Tafel polarization in the liquids found that, corrosion current density (I corr ) followed the rank: 3.5% NaCl solution (6.0 μA cm −2 ) > 3.5% NaCl solution containing MgO (3.6 μA cm −2 ) > 3.5% NaCl solution containing fragmented MPC (1.7 μA cm −2 ), suggesting that a physical barrier effect and dissolved phosphate ions improved its protection. This study shows that, MPC coating is a promising durable and environmentally favorable anti-corrosive material for protecting steel structures in some applications.

Portland Cementitious Coating with Autogenerated Oxide Film and Its Anticorrosion Behavior on Magnesium Alloy

Study on structure and properties of microarc oxidation coating on magnesium alloy in phosphate-potassium hydroxide solution

Study on Structure and Properties of Microarc Oxidation Coating Formed on AM60B Magnesium Alloy

Enhanced corrosion resistance of Mg alloy embedded in Cl - -containing Portland cement with the formation of CaCO 3 -coated Mg(Al)O passive film via one-step pulse electrodeposition

In-situ growth and anticorrosion mechanism of a bilayer CaCO 3 /MgO coating via rapid electrochemical deposition on AZ41 Mg Alloy concrete formwork

Self-healing performance and corrosion resistance of a bilayer calcium carbonate coating on microarc-oxidized magnesium alloy

Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

A zinc-doped coating prepared on the magnesium alloy by plasma electrolytic oxidation for corrosion protection

Preparation of Conductive and Corrosion Resistant Phosphate Conversion Coating on AZ91D Magnesium Alloy

Turning a native or corroded Mg alloy surface into an anti-corrosion coating in excited CO2

A new design strategy for the crack-free composite CaHPO4·2H2O/CaCO3 coating on AZ41 Mg alloy for magnesium concrete formwork

Effect of CO 2 on the microstructure and corrosion mechanism of Mg-Nd-Zn-Ca plasma electrolytic oxidation coatings

Corrosion resistance and molecular dynamics behavior of the MAO/SAM composite coatings on magnesium alloy

Study on corrosion resistance coating formed on magnesium-lithium alloy by micro-arc oxidation

Simultaneously Regulating Electrochemical Corrosion Behavior and Wettability of Magnesium–Neodymium Alloy by Self-Layered Chemical Conversion Coating

Enhanced long-term corrosion resistance of Mg alloys by superhydrophobic and self-healing composite coating

Towards development of anticorrosive CaCO3-coated passive layer on Mg alloy with ultrasound-assisted electrodeposition

Environmentally favorable magnesium phosphate anti-corrosive coating on carbon steel and protective mechanisms

One-step Preparation of Silicate Coatings on AZ91D Magnesium Alloy Surface for Boosting its Corrosion Resistance

Composite Coatings on a Mg–Li Alloy Prepared by Combined Plasma Electrolytic Oxidation and Sol–gel Techniques

A Review of Corrosion-Resistant PEO Coating on Mg Alloy