Abstract:The development of efficient and compact reactors is an urgent need in the field of distributed hydrogen production. Steam reforming of methane is the main method to produce hydrogen. Aiming at the problems of high heat and mass transfer resistance of the existing fixed bed reactors, and the difficulty of replacing the wall-coated catalyst in the microreactors, a composite packed bed was proposed to meet the demand of small-scale hydrogen production. The structure consists of a multi-channel framework with high thermal conductivity, which is filled with Ni/Al2O3 catalyst particles in each channel. A three-dimensional numerical model of the steam methane reforming process in the novel reactor was established using ANSYS FLUENT software. The heat transfer and reaction characteristics in the reactor were studied. Firstly, the advantages of the multi-channel skeleton in enhancing the radial heat transfer performance were verified by comparing it with the traditional randomly packed bed without the channel skeleton. Secondly, the influences of inlet velocity, inlet temperature, and heating wall temperature on the heat transfer and reaction performances in the reactor were studied, and a sensitivity factor was adopted to do the sensitivity analysis. The results show that the methane conversion rate is most sensitive to the wall temperature, while the inlet velocity and inlet temperature have less effect. Finally, the effects of two skeleton materials were studied. The results show that when the wall temperature is higher than 1200 K, there is no significant difference between these two reactors, which indicates that the use of cordierite with a lower price, but also with a lower thermal conductivity can significantly reduce the reactor's cost. The conclusions can be used as a reference for the design of small-scale hydrogen production reactors.

Numerical Investigation of Methane Steam Reforming in the Packed Bed Installed with the Fin-Metal Foam

Numerical Investigation of Methane Steam Reforming in Packed Bed Reactor with Internal Helical Heat Fins

Numerical investigation of hydrogen production via methane steam reforming in a novel packed bed reactor integrated with diverging tube

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

Enhanced Performance of Packed Bed Methane Dry Reformers Using Metal Foam Catalyst Pellets: A Particle Resolved CFD Study

Methane Steam Reforming With Axial Variable Diameter Particle Structures In Grille-Sphere Composite Packed Bed: A Numerical Study Of Hydrogen Production Performance

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Heat Transfer and Reaction Characteristics of Steam Methane Reforming in a Novel Composite Packed Bed Microreactor for Distributed Hydrogen Production

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Effects of Structural Parameters on the Performance of a Micro-Reactor with Micro-Pin-fin Arrays (MPFAR) for Hydrogen Production

Development of Cylindrical Laminated Methanol Steam Reforming Microreactor with Cascading Metal Foams As Catalyst Support

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

Parametric optimization of coupled fin-metal foam metal hydride bed towards enhanced hydrogen absorption performance of metal hydride hydrogen storage device

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Fin Structure Optimization for Improving Heat Transfer Efficiency and Hydrogen Absorption Rate of Metal Hydride Hydrogen Storage Tank

Foam Structured Membrane Reactor for Distributed Hydrogen Production

Experimental investigation on hydrogen production by methanol steam reforming in a novel multichannel micro packed bed reformer

Influence of Foam Morphology on Flow and Heat Transport in a Random Packed Bed with Metallic Foam Pellets-An Investigation Using CFD

Numerical Simulation on Methane Steam Reforming in Grille-sphere Composite Packed Bed with Axial Variable Diameter Configuration Particle

Hydrogen absorption performance investigation of a cylindrical MH reactor with rectangle heat exchange channels

Topology optimization of catalyst bed structure for a solar steam methane reforming reactor aiming at improved conversion efficiency and hydrogen yield