Abstract:Although the weight ratio of electron conductive additives and the binder to porous carbons in the electrode component of electric double-layer capacitors (EDLC) is minimal, however, without them the electrochemical performances of EDLC would decay quickly. In this work, we present a one-step approach for manufacturing a unique conductive carbon material that shows highly connecting hollow structures as well as approximate oxygenated surface groups to create a synergy effect with aqueous binder and the main component, porous carbon. The as-prepared carbon nanospheres (HCNs) were generated from a typical carbon black-PC20 in air (denoted as PC20HT) at mild temperatures ranging from 400 to 700°C for 2-4 h at a massive scale of approximate 1 kg h −1 . The as-prepared PC20HT displays a high specific surface area of 657 m 2 g −1 (the pristine PC20 has 112 m 2 g −1 ) with a pore volume of 0.71 cm 3 g −1 , and an oxygen content of 14.10 wt%. Interestingly, a premixing of PC20HT and porous carbon is required before making the electrode pastes. The well-premixed carbon materials and a water-soluble binder-polyacrylic acid are composed into highly-stable components as EDLC electrodes in an organic electrolyte. As consequently, the PC20HT-assisted electrodes demonstrate highly stable life cycles (charge-discharge behaviors), with a retention rate 82.13 % over 50,000 cycles at a narrow voltage window of 2.5-2.7 V at 0.5 A g −1 when compared to two conventional conductive carbons, BP2000 (68.45 %) and Super P (67.46%). Thermal annealing at 900 °C in Ar reduces the oxygen content of PC20HT to 4.25 wt% (referred to as TPC20HT), increasing the retention rate of life cycle to 88.89 % after the same cycles. TPC20HT-assisted EDLC electrodes exhibit a superior energy density of 34.76 Wh kg −1 , which is higher than CB-BP2000 and Super P-assisted EDLC electrodes. The transforming of structural morphologies as well as the surface oxygenated and graphitic structures of the as-prepared HCS, PC20HT, and TPC20HT were also described before and after long-term cycling. This simple route for producing conductive carbons is applicable in an aqueous binder system for preparing EDLC electrodes with a cost-effective and environmentally friendly approach.

Utilization of Waste Plastics-Derived Conductive Current Collector in Activated Carbon Electrodes: Effect of Activated Carbon Deposition Method

Pine Sawdust Derived Ultra-High Specific Surface Area Activated Carbon: Towards High-Performance Hydrogen Storage and Supercapacitors

Facile synthesis of morphology-controllable NiCo<sub>2</sub>S<sub>4</sub> arrays on activated carbon textile as high-performance binder-free supercapacitor electrode

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

On the Selection of the Current Collector for Water Processed Activated Carbon Electrodes for their Application in Electrochemical Capacitors

Pyrolysis of waste plastics-derived carbon nanomaterials on nickel foam for utilization as an efficient binder-free electrode: Effect of catalyst loading on capacitive performance

Tailoring Hierarchical Porous Carbon Electrode from Carbon Black via 3D Diatomite Morphology Control for Enhanced Electrochemical Performance

Practical Pouch Cell Supercapacitor Electrodes by Electrophoretic Deposition of Activated Carbon on Nickel Foam

Hierarchical Porous Activated Carbon Derived from Coconut Shell for Ultrahigh-Performance Supercapacitors

Excellent Diffusive Performance of Cold-Plasma-Exposed Activated Peanut Shell Carbon as an Electrode in Al-Air Batteries

Sawdust-Derived Activated Carbon with Hierarchical Pores for High-Performance Symmetric Supercapacitors

One-step generation of hollow graphitic carbon nanospheres with suitable oxygenated structures as conductive additives for water-soluble binder in highly stable supercapacitor electrodes

Conductive Modification of Activated Carbon Fiber Cloths via Electrophoretic Deposition for Cathode in Lithium‐Ion Capacitor

High-Density Polyethylene Waste-Derived Carbon as a Low-Cost Cathode Catalyst in Microbial Fuel Cell

Biochar with inherited negative surface charges derived from Enteromorpha prolifera as a promising cathode material for capacitive deionization technology

Electrochemical and Hydrothermal Activation of Carbon Fiber Supercapacitor Electrode

Decorating Activated Carbon: Insight to the Difference and the Storage Mechanism of Loading NiO and MnO2

Upcycling Waste Polyethylene Terephthalate to Produce Nitrogen-Doped Porous Carbon for Enhanced Capacitive Deionization

Two Birds with One Stone: Hydrogel-Derived Hierarchical Porous Activated Carbon toward the Capacitive Performance for Symmetric Supercapacitors and Lithium-Ion Capacitors

Vaporized Hydrothermal Functionalization of Carbon Fiber and Its Superior Supercapacitor Performance

Efficient preparation of carbon nanospheres-anchored porous carbon materials and the investigation on pretreatment methods