Abstract:For traditional manipulators, there is a large number of electrical cables between the motion controller and the joint servo controllers. It is very inconvenient for maintenance, update, and safe operation. In this paper, we develop a lightweight redundant manipulator with high stable wireless communication link and compliance control. The motion controller, servo controller, and communication link are taken as a whole system to be optimized. The manipulator body and the motion controller are physically separated. It is very helpful for building distributed networked-manufacturing system or intelligent manufacturing system for Industry 4.0. The control system can be quickly updated by changing the object's identification without reconnect the communication cables. The mechanical part of the manipulator contains modular joints and links. Each joint is integrated with hall sensors, an incremental magnetic encoder, an absolute magnetic encoder and current sensors. The electrical part includes a central controller, seven joint servo controllers, and a wireless communication module based on ZigBee. By designing the application layer protocol, the communication stability is improved. In order to achieve the force control requirements in fine operation like assembly. A wireless compliance control frame is then designed. The compliance control method is realized on the central controller, by which the generated control commands are sent to the joint servo controllers through a wireless link. The problems caused by large electrical cables are then solved. Finally, the prototype and the experimental system are developed. Some experiments are carried out, including wireless communication test, trajectory tracking experiments, load carrying experiments, and wireless impedance control experiments. Results verify the functions and performance of the developed 7-DOF manipulator. © 2018 IEEE.

Adaptive Gravity-Balancing Mechanism Using Adjustable Spring for a 6-Dof Serial Cooperative Manipulator

Adaptive Robust Posture Control of A Pneumatic Muscles Driven Parallel Manipulator with Redundancy

Single Spring Gravity Compensator for a Multi-DOF Manipulator

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

A Light Cooperative Manipulator with Wireless Communication and High Payload

Gravity Balance Design for Cobot

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Design and Analysis of a High-Payload Manipulator Based on a Cable-Driven Serial-Parallel Mechanism

Static Deformation-Compensation Method Based On Inclination-Sensor Feedback For Large-Scale Manipulators With Hydraulic Actuation

Gravity compensation algorithm for hybrid master manipulator

Optimization Design of Gravity Compensation System for a 5-DOF Articulated Heavy-Duty Robot

Stiffness Modeling and Optimization Analysis of a Novel 6-DOF Collaborative Parallel Manipulator.

Study and Design of a Light-weight Multi-joint Discretely-actuated Manipulator

Design and Analysis of 7-DOF Cable-Driven Manipulator

Active Gravity Compensation Test Bed For A Six-Dof Free-Flying Robot

Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media

A Lightweight Redundant Manipulator with High Stable Wireless Communication and Compliance Control

Design and Stiffness Analysis of a Novel 7-DOF Cable-Driven Manipulator

Whole Body Control of an Autonomous Mobile Manipulator Using Series Elastic Actuators

Design And Analysis Of A Lightweight Flexible Cable-Driven Manipulator

A Modular, Tendon Driven Variable Stiffness Manipulator with Internal Routing for Improved Stability and Increased Payload Capacity