Development and Performance of SIAT Bpet: a High-Resolution and High-Sensitivity MR-compatible Brain PET Scanner Using Dual-Ended Readout Detectors.

Zhonghua Kuang,Ziru Sang,Ning Ren,Xiaohui Wang,Tianyi Zeng,San Wu,Ming Niu,Longhan Cong,Samuel M. Kinyanjui,Qiaoyan Chen,Changjun Tie,Zheng Liu,Tao Sun,Zhanli Hu,Junwei Du,Ye Li,Dong Liang,Xin Liu,Hairong Zheng,Yongfeng Yang
DOI: https://doi.org/10.1007/s00259-023-06458-z
2024-01-01
Abstract:Positron emission tomography/magnetic resonance imaging (PET/MRI) is a powerful tool for brain imaging, but the spatial resolution of the PET scanners currently used for brain imaging can be further improved to enhance the quantitative accuracy of brain PET imaging. The purpose of this study is to develop an MR-compatible brain PET scanner that can simultaneously achieve a uniform high spatial resolution and high sensitivity by using dual-ended readout depth encoding detectors. The MR-compatible brain PET scanner, named SIAT bPET, consists of 224 dual-ended readout detectors. Each detector contains a 26 × 26 lutetium yttrium oxyorthosilicate (LYSO) crystal array of 1.4 × 1.4 × 20 mm3 crystal size read out by two 10 × 10 silicon photomultiplier (SiPM) arrays from both ends. The scanner has a detector ring diameter of 376.8 mm and an axial field of view (FOV) of 329 mm. The performance of the scanner including spatial resolution, sensitivity, count rate, scatter fraction, and image quality was measured. Imaging studies of phantoms and the brain of a volunteer were performed. The mutual interferences of the PET insert and the uMR790 3 T MRI scanner were measured, and simultaneous PET/MRI imaging of the brain of a volunteer was performed. A spatial resolution of better than 1.5 mm with an average of 1.2 mm within the whole FOV was obtained. A sensitivity of 11.0
What problem does this paper attempt to address?