Modal characteristics analysis of cylindrical shells based on beam functions-Ritz method

XU Gang-hui,ZHU Chang-sheng

DOI: https://doi.org/10.3785/j.issn.1008-973X.2023.09.011

2023-01-01

Abstract:The calculation accuracy of a single beam function is insufficient, when the function is used as an admissible function of the axial modal shape of cylindrical shells, and the results obtained based on different thin shell theories are difficult to compare directly. The beam function was combined with the Ritz method to establish a unified method including different thin shell theories for analyzing the modal characteristics of cylindrical shells. When the number of the beam function terms was set to one, the beam functions-Ritz method degenerated to the single beam function method, i.e., the single beam function method was a special case of the beam functions-Ritz method. By comparing with the finite element simulation and the existing literature data, the disagreement in the existing literature on whether the beam function is suitable for simulating the clamped or free boundary conditions of cylindrical shells was clarified. The effects of length-to-radius ratio and thickness-to-radius ratio on the modal frequencies of cylindrical shells under different boundary conditions and the corresponding theoretical calculation accuracy were studied, and then the applicable scope of different thin shell theories was summarized. Four thin shell theories were considered, including the Donnell, Reissner, Sanders and Love theories. Results show that the beam functions-Ritz method can effectively improve the calculation accuracy of the single beam function method, and the calculation accuracy of Donnell theory was obviously lower than that of the other three theories.