Abstract:Optical frequency combs of the femtosecond laser have been widely used in time-frequency technology and precision spectrum measurement. The absolute ranging technology derived from time-frequency characteristics of the optical frequency comb is expected to become the incomparable means of length metrology and distance measurement in the future due to its traceability to time-frequency standard and capability of large scale and high precision. This paper proposes a real-time absolute ranging method with multi-wavelength interferometry referenced to optical frequency comb, which enables multiple continuous-wave lasers to be synchronously calibrated to selected modes of the frequency comb by means of optical phase-locked loop. With synchronous phase measurement and calculation with excess fraction algorithm, absolute distance measurement by multi-wavelength interferometry is ultimately fulfilled. The proposed measurement method can not only retain high resolution and high accuracy of traditional laser interferometry, but also can be traced to a time-frequency reference, which is of metrological significance to high-precision length and distance measurement, especially to the definition of "meter" for physical reproduction. Measured results for ranging experiments have proved that the non-ambiguity range of the four-wavelength interferometer reaches 44.6 mm, and fluctuations of air refractive index cause the non-ambiguity range change with the order of nanometers. Through theoretical analysis, it is pointed out that the non-ambiguity range of the multi-wavelength interferometer in the actual measurement environment is restricted by the calculated error of air refractive index, especially the estimation accuracy and fluctuation degree of the refractive index relationship between wavelengths. And in a good laboratory conditions, the non-ambiguity range of real-time absolute ranging by frequency-comb-calibrated multi-wavelength interferometry can reach several meters or even tens of meters. At the same time, a 2-meter linear displacement comparison has been carried out, the P.V. value of the residual errors for linear fitting is 36.1 nm, and such residual errors match the magnitude of uncertainty of air refractive index calculated by empirical formula, which prove that the multi-wavelength interferometry can perform meter-level absolute ranging. The proposed research can be directly applied to precision manufacturing of large-scale semiconductors up to several meters, and is beneficial to promoting the accuracy of laser ranging for space mission.

Temperature Influence on Optical Fiber and Temperature Compensation Method for a Frequency Modulation Continuous Wave Absolute Distance Measurement System

An Improved Temperature Compensation Circuit for SLD Light Source of Fiber-Optic Gyroscope

Simulation Analysis of Temperature Effects on All-Fiber Optic Current Sensor

Software Compensation for the Coupling Error of a Single-Mode Fiber Coil under Time-Varying Temperature and Magnetic Field

Calibration and Correction of Particle Velocity Signals in Optical Fiber Measurement

Temperature Compensation in Full Optical Fiber Current Transformer Using Signal Processing

Research of a Reflective Fiber-Optic Displacement Sensor with Intensity Compensation

Research on the Temperature Compensation of Optical Fiber Displacement Sensor Based on Multisensor Data Fusion.

Artificial Neural Network Compensation for an Optical Fiber Temperature Sensing System Based on Optical Time Offset

Experimental Research on an Optical Fiber Temperature and Stress Sensor Based on the Time Offset

Temperature-fluctuation-sensitive accumulative effect of the phase measurement errors in low-coherence interferometry in characterizing arrayed waveguide gratings

Temperature Compensation of Optical Fiber Current Sensors With a Static Bias

Temperature compensation of optical alternating magnetic field sensor via a novel method for on-line measuring

Multiple interference components in a fiber Mach–Zehnder interferometer sensor and their influence on wavelength shift tracing

Modelling and infrared radiation compensation for non-contact temperature measurement

Absolute distance measurement without dead zone based on dual-channel dispersive interferometry using the femtosecond laser

Improved Differential Phase Detecting Optical Fiber Interferometer With a Low-Frequency Compensation Scheme

Analysis and compensation of the temperature field inside fiber optic coil

Real-time Absolute Distance Measurement by Multi-Wavelength Interferometry Synchronously Multi-Channel Phase-Locked to Frequency Comb and Analysis for the Potential Non-Ambiguity Range

Compensating for Influence of Laser-Frequency-drift in Phase-Sensitive OTDR with Twice Differential Method

Optical Frequency Transfer over 60 km Urban Telecom Fiber Link