Abstract:This work investigates the possibility of using LaMn0.7Fe0.3O3.15@mSiO(2) as oxygen carriers for chemical looping combustion (CLC). CLC is a new combustion technique with inherent separation of CO, from atmospheric N-2. LaMn0.7Fe0.3O3.15@mSiO(2) core shell materials were prepared by coating a layer of mesostructured silica around the agglomerated perovskite particles. The oxygen carriers were characterized using different methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N-2 sorption, hydrogen temperature-programmed reduction (H-2-TPR), and temperature-programmed desorption of oxygen (TPD-O-2). The reactivity and stability of the carrier materials were tested in a special reactor, allowing for short contact time between the fluidized carrier and the reactive gas [Chemical Reactor Engineering Centre (CREC) fluidized riser simulator]. Multiple reduction oxidation cycles were performed. TEM images of the carriers showed that a perfect mesoporous silica layer was formed around samples with 4, 32, and 55 nm in thickness. The oxygen carriers having a core shell structure showed higher reactivity and stability during 10 repeated redox cycles compared to the LaMn0.7Fe0.3O3.15 core. This could be due to a protective role of the silica shell against sintering of the particles during repeated cycles under CLC conditions. The agglomeration of the particles, which occurred at high temperatures during CLC cycles, is more controllable in the core shell-structured carriers, as confirmed by SEM images. XRD patterns confirmed that the crystal structure of all perovskites remained unchanged after multiple redox cycles. Methane conversion and partial conversion to CO, were observed to increase with the contact time between methane and the carrier. Indeed, more oxygen from the carrier surface, grain boundaries, and even from the bulk lattice was released to react with methane. Upon rising the contact time, less CO was formed, which is desirable for CLC application. Increasing the reaction temperature and methane partial pressure lead to enhanced conversions of CH4 under CLC conditions.

Over 90% C2+ Selectivity in Kalium-Doped Manganese Perovskite Oxygen Carriers for Chemical Looping Oxidative Coupling of Methane with Plasma Assistance

Over 90% C 2+ Selectivity in Kalium-Doped Manganese Perovskite Oxygen Carriers for Chemical Looping Oxidative Coupling of Methane with Plasma Assistance

Enhanced C2+ Selectivity in Plasma-assisted Chemical Looping Oxidative Coupling of Methane using (Na, Li, and K) doped LaMnO3

Plasma-Assisted Chemical Looping Oxidative Coupling of Methane over LaMnO 3 at 400 °C

Lattice oxygen behaviors of Mn-based catalytic oxygen carriers and sustainable oxidative coupling of methane in chemical-looping scheme

Enhanced Chemical looping oxidative coupling of methane by Na-doped LaMnO3 redox catalysts

Heteroatom-doping regulated Mg6MnO8 for improving C2+ hydrocarbons during chemical looping oxidative coupling of methane

Tungstate promoted CaMnO3-based core-shell redox catalysts for efficient chemical looping oxidative coupling of methane

Enhanced performance of chemical looping methane oxidative coupling by the synergistic effect of TiO2 doped Na2WO4/Mn2O3/SiO2 oxygen carriers

Plasma-Enhanced Chemical Looping Oxidative Coupling of Methane through Synergy between Metal-Loaded Dielectric Particles and Non-Thermal Plasma

Chemical‐Looping Conversion of Methane: A Review

MgO–Kaolin-Supported Manganese Ores As Oxygen Carriers for Chemical Looping Combustion

Development of Sinter-Resistant Core–Shell LaMnxFe1–xO3@mSiO2 Oxygen Carriers for Chemical Looping Combustion

Alkali-metal enhanced LaMnO3 perovskite oxides for chemical looping oxidative dehydrogenation of ethane

Achieving surface and bulk rate matching for chemical looping partial oxidation of methane by modulating oxygen transport

Oxidization and Reduction Kinetics of a Manganese Oxygen Carrier Granulated with the Spray Drying Method at a Tonnage Scale for Chemical Looping Combustion

Plasma Chemical Looping: Unlocking High-Efficiency CO2 Conversion to Clean CO at Mild Temperatures

Micro-structure change and crystal-structure modulated of oxygen carriers for chemical looping: Controlling local chemical environment of lattice oxygen

Tuning the Support Properties Toward Higher CO2 Conversion During a Chemical Looping Scheme.

Perovskite as oxygen storage materials for chemical looping partial oxidation and reforming of methane