Abstract:Intra-ply or inter-ply slippages are commonly seen at the crack tip impinging upon an interface in laminated anisotropic bodies. An interface slippage could occur in the form of yielding (e.g., a well-bonded ductile layer with plastic yielding) or debonding (e.g., a weak, sliding-free one) along the interface direction. This paper presents a fundamental solution for a crack in one individual brittle part impinging normally upon the interface slippage with the neighboring brittle part of laminated anisotropic materials under tensile loading. A superposition method is employed to explicitly solve the problem which combines the solution of a crack in a perfectly bonded elastic homogeneous medium, the solution of a continuous distribution of dislocations which represent slippage at the interface and an appendix solution which offsets the stress on the crack faces induced by the dislocations. This procedure reduces the problem to a singular integral equation which can be numerically solved by using Chebyshev polynomials. The validity of the present solutions is numerically verified where the traction-free condition on the crack faces and the equilibrium of shear stress along the interface slippage can be really satisfied. Numerical implementations are performed to analyze the influence of interface slippage on cracking and stress redistribution in laminated anisotropic bodies. It is found that interface yielding or interface debonding redistributes the stress ahead of the crack tip in the neighboring uncracked part. The presence of interface yielding or debonding lowers the high stress concentration in the tensile stresses ahead of the crack tip. It is also concluded that interface debonding appears to be more effective in lowering the stress concentration than interface plastic yielding.

A GRIFFITH CRACK MODEL IN A GENERALIZED NONHOMOGENEOUS INTERLAYER OF BONDED DISSIMILAR HALF-PLANES

Investigation of the Behavior of a Griffith Crack at the Interface of a Layer Bonded to a Half Plane Using the Schmidt Method for the Opening Crack Mode

A Fracture Mechanics Problem of a Functionally Graded Layered Structure with an Arbitrarily Oriented Crack Crossing the Interface

On interface crack in laminated anisotropic medium

Investigating the Behavior of a Griffith Crack at the Interface Between Isotropic and Orthotropic Elastic Half-Planes for the Opening Crack Mode

A Fracture Mechanics Model for an Arbitrarily Oriented Crack in Functionally Graded Materials

Fundamental Solutions of a Crack Impinging Upon an Interface Slippage in Laminated Anisotropic Bodies

Two Bonded Multiferroic Ceramics Half-Planes with Coupled Interfacial Imperfections: In-plane Fracture and Its Dislocation-Based Physical Mechanisms

Internal-interfacial cracking interaction: Combined phase-field and discontinuous Galerkin/cohesive zone modeling

An Interfacial Arc Crack in Bonded Dissimilar Isotropic Laminated Plates

On the Moving Griffith Crack in a Non-Homogeneous Orthotropic Medium

Dynamic Response of a Crack in a Functionally Graded Interface of Two Dissimilar Piezoelectric Half-Planes

Mode III Yoffe Dynamic Crack Problem on the Interface Between Dissimilar Materials

On the Moving Griffith Crack in a Nonhomogeneous Orthotropic Strip

A General Modelling Method for Functionally Graded Materials with an Arbitrarily Oriented Crack

Fracture Analysis on the Arc-Shaped Interfacial Crack Between a Homogeneous Cylinder and Its Coating

Modeling Method for Periodic Cracks in Functionally Graded Strips with Arbitrary Properties

Interaction Between an Interface and Cracks

Interface Cracks in Kirchhoff Anisotropic Thin Plates of Dissimilar Materials

A Generalized Comninou Contact Model for Interface Cracks in Anisotropic Elastic Solids

The interface crack problem under a concentrated load for a functionally graded coating–substrate composite system