Abstract:Intra-ply or inter-ply slippages are commonly seen at the crack tip impinging upon an interface in laminated anisotropic bodies. An interface slippage could occur in the form of yielding (e.g., a well-bonded ductile layer with plastic yielding) or debonding (e.g., a weak, sliding-free one) along the interface direction. This paper presents a fundamental solution for a crack in one individual brittle part impinging normally upon the interface slippage with the neighboring brittle part of laminated anisotropic materials under tensile loading. A superposition method is employed to explicitly solve the problem which combines the solution of a crack in a perfectly bonded elastic homogeneous medium, the solution of a continuous distribution of dislocations which represent slippage at the interface and an appendix solution which offsets the stress on the crack faces induced by the dislocations. This procedure reduces the problem to a singular integral equation which can be numerically solved by using Chebyshev polynomials. The validity of the present solutions is numerically verified where the traction-free condition on the crack faces and the equilibrium of shear stress along the interface slippage can be really satisfied. Numerical implementations are performed to analyze the influence of interface slippage on cracking and stress redistribution in laminated anisotropic bodies. It is found that interface yielding or interface debonding redistributes the stress ahead of the crack tip in the neighboring uncracked part. The presence of interface yielding or debonding lowers the high stress concentration in the tensile stresses ahead of the crack tip. It is also concluded that interface debonding appears to be more effective in lowering the stress concentration than interface plastic yielding.

Interface Cracks in Kirchhoff Anisotropic Thin Plates of Dissimilar Materials

An Interfacial Arc Crack in Bonded Dissimilar Isotropic Laminated Plates

An analytical singular element for interface cracks in bi-material Kirchhoff plate bending

On interface crack in laminated anisotropic medium

Interface Cracks with Surface Elasticity in Anisotropic Bimaterials

An Interface Crack for a Functionally Graded Strip Sandwiched Between Two Homogeneous Layers of Finite Thickness

A Cracked Sliding Interface Between Anisotropic Bimaterials

Bending of a Nanoplate with Strain-Dependent Surface Stress Containing Two Collinear Through Cracks

Fracture Analysis of Mode-Ii Crack Perpendicular to Imperfect Bimaterial Interface

Bending fracture of ultra-thin plates with surface elasticity containing a thickness-through crack

Deformations Near an Elliptical Hole with Surface Effect in a Laminated Anisotropic Thin Plate

Multiple cracks on the arc-shaped interface in a semi-cylindrical magneto-electro-elastic composite with an orthotropic substrate

Fundamental Solutions of a Crack Impinging Upon an Interface Slippage in Laminated Anisotropic Bodies

A Three‐phase Laminated Anisotropic Elliptical Inhomogeneity with Internal Uniform Stress Resultants

Two perfectly-bonded dissimilar orthotropic strips with an interfacial crack normal to the boundaries

Interface crack problems of a laminated piezoelectric plate

The cylindrical interface crack in a layered tubular composite of finite thickness under torsion

Interface Crack Embedded in a Bi-Material Plane under Shear and Compression

A Mode III Interface Crack with Surface Strain Gradient Elasticity

Smooth Interface Crack Between Two Bonded Dissimilar Orthotropic Elastic Media under Shear Loading

Interface Crack Between Dissimilar Thin-Films with Surface Effect