Abstract:This paper presents a discrete-time multi-bit Delta–Sigma modulator employing successive approximation (SA)-quantizers for bio-signal acquisitions. In the proposed [Formula: see text] modulator, the input signal is separately quantized and the signal summation is performed in the digital domain to avoid the power hungry analog adder. Two SA-quantizers are used in this modulator. One is dedicated to quantize the input signal and the other is to quantize the summation of the integrators’ outputs. Dynamic Element Matching (DEM) technique is used to mitigate the mismatch among the digital-to-analog conversion (DAC) elements. To reduce the complexity of the DEM logic, the 7-bit summed quantizer output is truncated into a 5-bit code before it is fed to the DEM circuits. Double tailed inverter-based op-amp is used in the loop filter for low-voltage operation. Correlated-double-sampling is adopted to enhance the effective gain of the integrator. The proposed modulator is designed and fabricated in a 130-nm CMOS technology. The measurement result shows that the modulator achieves a dynamic range of 80[Formula: see text]dB, a peak SNDR of 77[Formula: see text]dB in a 25[Formula: see text]kHz signal bandwidth at sampling rate of 800[Formula: see text]kHz. The prototype modulator occupies 0.25[Formula: see text]mm2 and consumes only 19.5[Formula: see text][Formula: see text]W from a 0.6[Formula: see text]V supply. The proposed modulator achieves a figure of merit of 67 fJ per conversion step.

A Two-Channel Time-Interleaved Continuous-Time Third-Order CIFF-Based Delta-Sigma Modulator

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

An 18-Bit 2-2 MASH Delta-Sigma Modulator for Isolated Amplifier

Behavioral Modeling of Third- order Cascaded Sigma - delta Modulators

A 0.18 μm Single-poly CMOS ∑-△ Modulator for Digital Audio Applications

Modeling of a 200 KHz Bandwidth Low-pass Switch-capacitor Sigma-delta DAC with a Raised Spur-free Modulator

A High-Performance,Low-Power ΣΔ Modulator for Digital Audio Applications

A Reconfigurable Continuous-Time Delta-Sigma Modulator Structure Using Hybrid Loop Filter and Time-Interleaved Quantizer

A 96 dB DR Second-Order CIFF Delta-Sigma Modulator with Rail-to-Rail Input Voltage Range

A 1-V 60-Μw 85-Db Dynamic Range Continuous-Time Third-Order Sigma-Delta Modulator

A 5MHz-BW, 86.1dB-SNDR 4X Time-Interleaved 2<sup>nd</sup>-Order ΔΣ Modulator with Digital Feedforward Extrapolation in 28nm CMOS

A 10-Khz BW 104.3-Db DR Discrete-Time Delta-Sigma Modulator with Ring-Amplifier-based Integrator

Design Of A 5gs/S 200 Mhz Bw 74.8 Db Sndr Continuous-Time Sigma Delta Modulator In 28nm Cmos

Design of a High-speed Wide-band Continuous-Time Delta-Sigma Modulator

A Low-Power Second-Order Two-Channel Time-Interleaved SigmaDelta Modulator for Broadband Applications.

A 2 .2 MHz,8 .3 mW Multi-bit Continuous-Time Sigma-Delta Modulator

A 20mhz BW 35fj/conv. Continuous-Time ΣΔ Modulator with Single-Opamp Resonator Using Finite GBW Compensation Method.

A 9-Mw Continuous-Time Hybrid Active-Passive Sigma Delta Modulator With 84-Db Dynamic Range

A Partially Feedback NSSAR Embedded Third-Order Delta–Sigma Modulator with Gain-Boosted Two-Stage FIAs

A 15mhz BW Continuous-Time ΔΣ Modulator with High Speed Digital ELD Compensation

A 0.6V 19.5μw 80db DR ΔΣ Modulator with SA-Quantizers and Digital Feedforward Path