Abstract:Despite the success of Fe(II)/peroxymonsulfate (PMS) process in detoxifying organic pollutants, its intrinsic drawback of sluggish Fe(III) conversion to Fe(II) limits its large-scale practical application. Here we report that commercial MoS2, a common metal sulfide, can be used to unlock this kinetic constrain. Addition of MoS2 greatly accelerates the reduction of Fe(III) to Fe(II), decomposition of PMS, and thus results in enhanced degradation efficiency of 2,4,6-trichlorophenol (TCP) (> 95%) and other biorefractory halogenated organic compounds within 30 min. Mass spectroscopy data indicate that TCP can be destructed into low-molecular-weight organic acids, manifesting its powerful oxidation capacity of MoS2-assisted Fe(II)/PMS process. Once the Fe(III) in aqueous solution is stabilized by its organic or inorganic ligands, the boosting effects of MoS2 are largely inhibited and less than 80% of TCP is degraded. Sulfate radicals and hydroxyl radicals are identified as the dominant reactive oxidants in the MoS2/Fe(II)/PMS process by radical scavenging tests. The unsaturated S on the fresh MoS2 surface and the exposed Mo(IV) sites are supposed to react with PMS and Fe(III) in the aqueous solution, respectively. No iron oxides and Mo oxides are detected in X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction (XRD) measurement, indicating the accelerated Fe(II)/PMS process mainly occurs in the homogeneous solution. MoS2 exhibits excellent recyclability and sustainable reactivity for the degradation of TCP after 5 consecutive runs. Overall, the present study provides a novel strategy to overcome the rate-limiting step of Fe(III)/Fe(II) that is commonly challenging Fe-based advanced oxidation processes (AOPs) and enable Fe (II)/PMS as efficient as typical Co(II)/PMS.

The Pivotal Role of Selenium Vacancies in Defective FeSe2@MoO3 for Efficient Peroxymonosulfate Activation: Experimental and DFT Calculation

Defective Mose2 for Enhanced Remediation of 2,4-D by Boosting Peroxymonosulfate Activation

Synergy Between Iron and Selenide on FeSe2(111) Surface Driving Peroxymonosulfate Activation for Efficient Degradation of Pollutants.

Enhancement of Peroxymonosulfate Activation for 2,4-Dichlorophenoxyacetic Acid Removal by MoSe2 Induced Fe Redox Cycles

Defect-engineered FeSe2−x@C with Porous Architecture for Enhanced Peroxymonosulfate-Based Advanced Oxidation Processes

Selenium Oxoanions Removal from Wastewater by MoS42− Intercalated FeMgAl LDH: Catalytic Roles of Fe and Mechanism Insights

Toward Practical Water Decontaminations Via Peroxymonosulfate Nonradical Oxidation: the Role of Cocatalyst MoS2 with Sulfur Vacancies

Sulfur vacancy rich MoS2/FeMoO4 composites derived from MIL-53(Fe) as PMS activator for efficient elimination of dye: Nonradical 1O2 dominated mechanism

Persulfate activation by novel iron–carbon composites for organic contaminant removal: Performance, mechanism, and DFT calculations

Mechanism and performance evaluation of FeSe2 and MoS2-loaded carbon fiber sheet as a novel heterogeneous Fenton-like catalyst

N-doped carbon intercalated Fe-doped MoS2 nanosheets with widened interlayer spacing: An efficient peroxymonosulfate activator for high-salinity organic wastewater treatment

Preparation of Iron Selenide Decorated 1t/2h Molybdenum Disulfide Catalysts for Peroxymonosulfate Activation: Effect of Phase Transition

Mo0 and Mo4+ Bimetallic Reactive Sites Accelerating Fe2+/Fe3+ Cycling for the Activation of Peroxymonosulfate with Significantly Improved Remediation of Aromatic Pollutants

N-doped carbon intercalated Fe-doped MoS<sub>2</sub> nanosheets with widened interlayer spacing: An efficient peroxymonosulfate activator for high-salinity organic wastewater treatment

Superoxide radicals dominated visible light driven peroxymonosulfate activation using molybdenum selenide (MoSe2) for boosting catalytic degradation of pharmaceuticals and personal care products

FeSeS@C Cage-In-Cage Superlattices for Peroxymonosulfate Activation: Surface Acidity Regulates Fe Spin State

Spatial confined synthesis of submicron Fe-MoS2 with abundant surface cationic groups and sulfur vacancies for enhanced peroxymonosulfate activation

Pivotal Roles of MoS2 in Boosting Catalytic Degradation of Aqueous Organic Pollutants by Fe(II)/PMS

Fe Se @C superlattice nanocrystals for peroxymonosulfate activation: Intrinsic nature of Fe spin state

Efficient Removal of Selenite in Aqueous Solution by MOF-801 and Fe3O4/MOF-801: Adsorptive Behavior and Mechanism Study

Simultaneous incorporation of Co and Fe into sulfur-vacancy-enriched MoS 2 enhances the activation of peroxymonosulfate