Abstract:Research Objective For abnormal engine vibration due to hidden engine design defects, manufacturing error or mount mismatching, the priority should be to re-match the mount, which is the easiest way to solve this hard problem. In this study, it focuses on engine mount matching research, and the torque roll axis (TRA) decoupling method is applied to remove low-frequency intermittent traverse of an engine model. Methodology With the measured inertia characteristics of the engine powertrain, the TRA theory is used to calculate the direction of TRA. It is indicated in the TRA complete decoupling theory that it is theoretically possible if a pure TRA mode is implemented, torque vibration along crankshaft only produces roll vibration along TRA. However, other loads exist on engine-mounts system. So, a large decouple rate along TRA with acceptable decouple rate in other directions is a priority in guiding further adjustment on installation location, installation angle and stiffness of the four engine mounts. Then, energy decoupling theory is used to calculate the decouple rate after optimization, to validate whether the vibration direction with large excitation energy has been decoupled to the greatest extent. Results According to TRA decoupling calculation with experimental results, slight adjustments on the engine mount installation location, installation angle and stiffness can remove the abnormal low-frequency vibration Phenomenon tremendously, and promote NVH performance of the vehicle. Limitations of this study It is found that multiple hydraulic mounts can remarkably improve the performance of low frequency vibration isolation, but worsen the vehicle noise performance. If active mount control method can be applied jointly, it is prospective that the mount matching performance could be optimal. What does the paper offer that is new in the field including in comparison to other work by the authors? A new optimization idea for engine-mounts decoupling method is applied. With a large decouple rate along TRA and acceptable decouple rate in other directions, the phenomenon of abnormal low-frequency vibration can be eliminated. Conclusion TRA Mount Matching Optimization Methods can greatly improve the abnormal low frequency vibration of the powertrain system. © 2013 Springer-Verlag.

Dynamic Modeling and Optimization for Powertrain Shake Characteristics of Electric Powertrain System with Hydraulic Engine Mounts

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Optimization and Robustness Analysis of Powertrain Mounting System

Modeling and active control of power-split hybrid electric vehicle launch vibration

Idle shake vibration optimization of an engine mounting system through the practical application of transfer path analysis

Simulation of Vibration Characteristics of Semi-Active Controlled ER Fluid Engine Mounts

Dynamic optimization of tracked vehicle power train based on torsional vibration analysis

Electromechanical coupling dynamic characteristics of electric drive system for electric vehicle

Hybrid Electric Vehicle Powertrain Mounting System Optimization Based on Cross-Industry Standard Process for Data Mining

A Simplified 4-DOF Dynamic Model of a Series-Parallel Hybrid Electric Vehicle

Multi-objective optimization of active suspension system in electric vehicle with In-Wheel-Motor against the negative electromechanical coupling effects

A hybrid modeling approach for automotive vibration isolation mounts and shock absorbers

Study on mount matching optimization for removing powertrain abnormal low frequency vibration

Optimal Matching Designs Selection and Analysis of Mounting System for Car Power-train

Study on electromechanical coupling inherent vibration characteristics and parameter influencing law of EMT system used in HEV

Research on Transmission Characteristics and Torsional Vibration Control of Hybrid Transmission Wind Turbines

Noise Analysis and Optimization Design of an Electric–Mechanical–Hydraulic Power Coupler for the Vehicle

Study on Impact of Powertrain Mounting Stiffness on Vehicle Vibration Characteristics

Two-step dynamics of a semiactive hydraulic engine mount with four-chamber and three-fluid-channel

Nonlinear Vibration Analysis of the Coupled Gear-Rotor-Bearing Transmission System for a New Energy Vehicle

Experimental Investigation and Vibration Control of Semi-active Hydraulic-Pneumatic Mounts for Vibratory Roller Cab