Abstract:To improve the understanding on methane storage in wet porous media under hydrate favorable conditions, hydrate formation loaded by an activated carbon bed in three three-dimensional printed containers was carried out, while the recycling performance of the activated carbon bed was also evaluated. As expected, due to low permeability of the bed, poor hydrate kinetics was observed for small particles, but this is improved by increasing the exposure of the bed. When there is hydrate formation loaded by an activated carbon bed in a container, the specific contact area governs hydrate nucleation and growth kinetics, and the accessibility of methane with inner water increases with the increase in gas–solid contact area, giving rise to fast hydrate nucleation and large methane uptake. Impressively, the hydrate induction time for container 3 is only 3.53 and 41.79% of that in container 1 under the filling ratios (volume ratio of the sample to container) of 80 and 100% separately, while the methane uptake increases by about 8% for both the scenarios. In addition, because of the migration of water to side walls, exceptional recycling performance of the activated carbon bed was also observed, and this characteristic causes the bed to be easily charged and discharged like a battery. These findings may pave the way for the application of the adsorbed natural gas technology using wet activated carbon under hydrate-favorable conditions.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c02348.Detailed dimensions of the 3D-printed containers; packing density of different samples; experimental conditions and results of hydrate formation for each run; and multilayer structures of container 3 (PDF)(PDF)Visible hydrate growth loaded by the bed of activated carbon (MP4)This article has not yet been cited by other publications.

Fast and efficient methane storage in massive fibrous hydrates produced via pre-frozen activated carbon

Kinetics of Methane Hydrate Formation in a 1200 Ml Unstirred Reactor for Natural Gas Storage

Promotion of Activated Carbon on the Nucleation and Growth Kinetics of Methane Hydrates

SI methane hydrate confined in C8-grafted SBA-15: A highly efficient storage system enabling ultrafast methane loading and unloading

Enhanced formation of methane hydrate from active ice with high gas uptake

Fast formation kinetics of methane hydrate promoted by fluorinated graphite

High-efficiency gas storage via methane-tetrahydrofuran hydrate formation: Insights from hydrate structure and morphological analyses

Hydrate-based adsorption-hydration hybrid approach enhances methane storage in wet MIL-101(Cr)@AC under mild condition

Facile and sustainable methane storage via clathrate hydrate formation with low dosage promoters in a sponge matrix

Hydrate-based adsorption-hydration hybrid approach enhances methane storage density in ZIF-8@AC

Carbon nanotubes-based porous media constructed via 3D printing for methane hydrate formation

Insight into the Micro-Mechanism of Hydrate-Based Methane Storage from Active Ice

Hydrate Formation Loaded by an Activated Carbon Bed in 3D-Printed Containers

Accelerated methane storage in clathrate hydrates using the natural tobacco

Experimental study on synergistic promotion of reciprocating impact and porous materials on methane capture based on hydrate method

Pyrolytic aerogels with tunable surface groups for efficient methane solidification storage via gas hydrates

Thermotactic Habit of Gas Hydrate Growth Enables a Fast Transformation of Melting Ice

Enhanced methane hydrate formation in the highly dispersed carbon nanotubes-based nanofluid

Synthesis of methane hydrate at ambient temperature with ultra-rapid formation and high gas storage capacity

Molecular dynamic simulations of methane hydrate formation between solid surfaces: Implications for methane storage

MXene (ti3c2tx) As a Promising Substrate for Methane Storage Via Enhanced Gas Hydrate Formation.