Abstract:FeCrAl oxide dispersion strengthened (ODS) steel is regarded as one of the most promising candidate materials for nuclear fission reactors such as supercritical pressurized water reactor (SCPWR), sodium-cooled fast reactor (SFR), and lead bismuth-cooled fast reactor (LFR) and so on, since it has excellent irradiation resistance and good corrosion resistance of super-critical water and Pb–Bi coolants. In the present work, irradiation response of a Zr-added FeCrAl ODS steel (15Cr–4Al-0.1Ti-0.6Zr) together with an Al-free ODS (16Cr-0.1Ti) steel and a non-ODS steel T91 was studied. Electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM) were used to characterize the microstructures including grains, dislocations, and oxides in the pristine specimens and irradiation defects in the irradiated specimens. Nano-indentation tests were used to evaluate the change in hardness after irradiation. The oxides in the 15Cr–4Al-0.1Ti-0.6Zr specimen are slightly larger than those in the 16Cr-0.1Ti specimen, but with a similar number density. After irradiated with 9.45 MeV 83Bi35+ to 26 dpa at ambient temperature, hardening was observed in all the specimens. Irradiation hardening of the 15Cr–4Al-0.1Ti-0.6Zr specimen is slightly higher than the 16Cr-0.1Ti specimen but significantly lower than the non-ODS steel T91. The irradiation defects in the ODS steel specimens are apparently smaller than those in T91 with a similar number density. By calculating sink strength of the initial microstructures such as grains, dislocations and oxides, the evolution of irradiation defects was discussed. A linear relationship between the irradiation hardening and the sink strength was established. A similar linear relationship between the calculated irradiation hardening using the TEM data (based on dispersion barrier hardening model (DBH) and Friedel-Kroupa-Hirsch (FKH) model, respectively) and sink strength was also found. The calculated irradiation hardening is relatively lower than the experimental value, indicating the possible contribution of Cr segregation to hardening which needs further study.

Preliminary Study on the Microstructure and Hardness of Wire and Arc Additively Manufactured ODS-RAFM Steel Subjected to 2.5 MeV Fe Ion Irradiation

The Microstructural and Hardness Changes of Tungsten Fiber after Au2+ Irradiation

A comparison study of change in hardness and microstructures of a Zr-added FeCrAl ODS steel irradiated with heavy ions

Microstructure evolution and void swelling of ODS ferritic/martensitic steel under high damage irradiation

Heterogeneous microstructure and anisotropic mechanical properties of reduced activation ferritic/martensitic steel fabricated by wire arc additive manufacturing

Mechanical behavior of ion-irradiated ODS RAF steels strengthened with different types of refractory oxides

Effects of Fe self-ion irradiation on a low carbon MX-ODS steel at 550C

Effects of Fe self-ion irradiation on a low carbon MX-ODS steel at 550 degrees C

Microstructures and Ion-Irradiation Behaviour of Friction Stir Welded 12Cr-Ods Steel

TEM Studies of 1 MeV Fe+ Ion-Irradiated W Alloys by Wet Chemical Method: High-Temperature Annealing and Deuterium Retention

Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting

Microstructure and mechanical properties of multi-component nano oxide-dispersion strengthened RAFM steel fabricated via laser powder bed fusion

Atom probe tomography characterization of high-dose ion irradiated MA957

A Novel Additive Manufactured Reduced Activation Ferritic/martensitic Steel Enhanced by In-Situ Nanoparticles Benefiting from Oxygen Addition

In-situ TEM investigation of dislocation loop evolution in Al-forming austenitic stainless steels during Fe+ irradiation: Effects of irradiation dose and pre-existing dislocations

Radiation induced amorphization of carbides in additively manufactured and conventional ferritic-martensitic steels: In-situ experiments on extraction replicas

Nanoindentation Experiment and Crystal Plasticity Study on the Mechanical Behavior of Fe-ion-irradiated A508-3 Steel

Structural damage and phase stability of cobalt-free FeCrNi medium-entropy alloy under high-fluence ion irradiation

Microstructures and mechanical properties of a modified 9Cr ferritic-martensitic steel in the as-built condition after additive manufacturing

Effects of Fe-Ions Irradiation on the Microstructure and Mechanical Properties of FeCrAl-1.5wt.% ZrC Alloys

Cost-Effective Thermomechanical Processing of Nanostructured Ferritic Alloys: Microstructure and Mechanical Properties Investigation