Abstract:To explore the variations of the loading, deformation, and loss and to determine the mechanical state, loss characteristics, and stability for the shaft coal pocket wall in coal mines under a dynamic-static load, this paper innovatively attempts to conduct a three-dimensional physical similarity test of a transparent material shaft coal pocket, as well as the experiments of loading and unloading coal in the shaft coal pocket using different bulk storage materials 80 times. Then, the deformation, pressure, the surrounding rock, and the flow pattern of the silo wall were discussed considering the existence of the warehouse wall support. The characteristics of shaft wall deformation and surrounding rock stress cracks during the unloading were analyzed with the help from multiple integrated test systems such as strain gauges, pressure sensors, borehole peeps, and other comprehensive test systems. The results indicated that different dispersion particles have a significant impact on the strain of the shaft wall. When using the coal particles as storage materials, the overpressure coefficient of the shaft wall is up to 1.95 times higher than using dry sand particles. The particle size and internal friction angle of the bulk particles impact significantly on the deformation of the wall, where the cohesive force among the dispersed particles produced by the compaction effect has a certain influence on the side pressure of the silo wall. During the unloading process, coal particles were easier to obtain an arching phenomenon than dry sand particles. In addition, the number of bulk arching could be significantly reduced under the conditions of the warehouse wall support. The "weak rock stratum" in the surrounding rock plays a major role in controlling the deformation and failure development of the shaft wall. The three-dimensional physical simulation experiment of the transparent shaft wall truly reproduces the field engineering practice, and the physical simulation results are verified by numerical simulation analysis.

Shearing Stress Distribution of Outer Shaft Wall in Drainage Settlement Coal Field

Distribution Characteristics of the Additional Vertical Stress on a Shaft Wall in Thick and Deep Alluvium: a Simulation Analysis

Analysis on Inner Force of Circular Working Shaft with SMW Method

Thermodynamic Model for Assessing Thermal Stress Distribution between the Shaft Concrete Wall and Surrounding Deep Rocks

Stress Distribution in Direct Shear Loading and its Implication for Engineering Failure Analysis

Theoretical analysis of drilling cuttings considering stress zoning of surrounding rock and its application in stress detection

A new method for monitoring coal stress while drilling process: theoretical and experimental study

Stability analysis and failure control of a longwall panel with a large mining height considering fracture distribution

Investigation on Rock Strata Fracture Regulation and Rock Burst Prevention in Junde Coal Mine

Field and Numerical Study on Deformation and Failure Characteristics of Deep High-Stress Main Roadway in Dongpang Coal Mine

Experimental study on the influence of horizontal stress difference coefficient on coal rock fracture

Three-Dimensional Physical Similarity Simulation Experiments for a Transparent Shaft Coal Pocket Wall in Coal Mines.

Study on Distribution Law of Stress and Permeability around Hydraulic Fracturing Borehole in Coal and Rock

Mechanism of stress-induced spalling of deep hard rocks under shear boundary condition

Stability analysis of rock fracture and support performance in steeply dipping ore deposits with massive mining stopes

Experimental Investigation on Mechanical and Damage Properties of Single Fractured Coal Subjected to Water Pressure and Triaxial Compression

Effect of Lateral Stress on the Mechanical Properties of Rock Fracture and Its Implication on the Stability of Underground Oil Storage Caverns

Influence of roof confined water drainage on stress distribution in coal seam

Stress Distribution and Failure Characteristics for Workface Floor of a Tilted Coal Seam

Stress Distribution and Stress-induced Failures in Surrounding Rock Mass of Deep Tunnels

Longwall Top Coal Caving Mechanisms in the Fractured Thick Coal Seam