Discussion of Safe Operation for Substation Comprehensive Automatic System

Qingyun Li

2008-01-01

Abstract:Substation comprehensive automatic systems are widely applied to various level electrical system.Some exiting problems in their application are discussed in the article.

What problem does this paper attempt to address?

The Research of Configuration for Stability Control Device in Smart Substation

He Ye,Hu Binjiang,Chang Dongxu,Zhang Jie,Li Lingfang,Chen Yixuan

DOI: https://doi.org/10.1051/e3sconf/202126002007

2021-01-01

E3S Web of Conferences

Abstract:A unified specification to design and operate the stability control device in smart substation has not been formed yet, which has greatly affected the promotion and application of stability control device in smart substation. Thus, referring to the technical specifications of protection device and combining to the specificity of stability control device, a full and detailed configuration scheme is proposed to meet the requirement, including the device configuration principle, the access configuration of SV and GOOSE for variable primary connection types, the virtual terminal and soft switch. This solution is beneficial to standardize the R&D of stability control device in smart substation, and to facilitate on-site debugging, operation and maintenance.
Discussion on Key Technology Application of Substation Based on IEC 61850 Standard

张昀

DOI: https://doi.org/10.3969/j.issn.1001-5531.2008.23.011

2008-01-01

Abstract:Aiming at the practical application of IEC 61850 standard at present,starting from such aspects as improving model description,accessing primary equipment,optimizing network structure and ensuring information safety,the substation design based on IEC 61850 and some key technologies during its application were analyzed.Some suggestions were proposed on adopting fault tolerance,encryption,virtual private network technology for several problems encountered in operation.
Research and Development of Comprehensive Monitoring and Management Platform for Substation

Hua Wang,Gangfeng Yan

DOI: https://doi.org/10.1109/wcica.2012.6359132

2012-01-01

Intelligent Control and Automation

Abstract:Substation is an important part of power system and its operation status exerts great effect on the safety of power system. Comprehensive monitoring management platform for substation (CMMP) is a digital monitoring platform which has uniform interfaces; flexible expansibility and hierarchical network control ability, and it is custom-designed for safe operation of substation. CMMP consists of direct current real-time monitoring subsystem, intrusion detection and hierarchical video monitoring subsystem, temperature and humidity and fire monitoring subsystem based on WSNs. CMMP adopt composite structure of C/S and B/S which would be convenient for computer and other mobile end to query monitoring information. Owing to the perfect private network of power system, CMMP can monitor both local and cross-domain substations. In addition, CMMP can classify and manage all kinds of alarm information from substation and realize distribution monitoring centralized management.
Design and Realization of Substation-Control Center Two Level Distributed Alarming System

Wei Jin Zhuang,Hai Bing Zhu,Jia Qing Zhao,Yong Gang Zhang,Ming Yang Sun

DOI: https://doi.org/10.4028/www.scientific.net/amr.933.789

2014-01-01

Advanced Materials Research

Abstract:This paper proposes the construction mode of a two-level distributed alarming system, in which alarms are coordinately processed by substations and control center. In substation side, we classify alarms into several grades according to the degree of their importance and send the extracted key alarms to control center, thus reduce the amount of alarm passing and ensure the transmission reliability and speed; meanwhile, we carry out alarm verification and pretreatment through information redundancy to validate alarm correctness. In control center side, we integrate the data of ordinary Supervisory Control and Data Acquisition (SCADA) and the alarms received directly from substations, and carry out comprehensive fault reasoning and correctness verification. In order to illustrate the feasibility of the substation-control center distributed alarming system, the overall structure, substation smart alarm (SSA), control center smart alarm (CCSA) and cooked data transmission of this construction mode will be discussed in detail.
Integrated Automation of Low Voltage Substation

JIANG Dao-zhuo,YANG Gui-yu

DOI: https://doi.org/10.3785/j.issn.1008-973x.2001.01.021

2001-01-01

Abstract:This paper discusses the realization of integrated automation of low voltage substation. In view of these substation's characteristics of multi-load circuits, multi-switch types, complex features and high fault rate, the paper proposes a more reasonable scheme of constructing distributed, multi-layers and multi-microprocessors system. Especially due to the application of effectively combined and modularized local bus, all slave computer systems can be arbitrarily constructed according to substation scale and custom requirement, which ensures the rate of application to deployment near to 1. The proposed scheme is especially suitable to the cases of integrated automation of low voltage substation.
Discussion about 20 kV System Client Substation Design

YANG Wenzheng,LI Ping

DOI: https://doi.org/10.16618/j.cnki.1674-8417.2013.11.021

2013-01-01

Abstract:This paper analyzed the superiority of 20 kV voltage class relative to 10 kV voltage level.The differences of neutral point grounding way of 20 kV voltage grade were introduced,and the problems need to be paid attention to for 20 kV voltage class were expounded,including equipment selection,substation chamber and transformer room layout,10(20) kV transition,grounding resistance,etc.It could provide reference for similar design.
Application and Improvement on Voltage and Reactive Power Control System Based on Substation Supervision System

吴皓,周浩

DOI: https://doi.org/10.3969/j.issn.1674-3415.2004.08.018

2004-01-01

Abstract:A voltage and reactive power control system (VQC) based on substation automation system is presented in this paper. This paper puts forward the improved measures of control strategies and operation system, after analyzing control strategies based on nine zone control method and combining with operation situation of VQC in Xiaonan substation. It's verified to improve the eligibility of voltage.
Design Application and Research of Substation Comprehensive Automation System Based on Smart Grid

Rui Bian,Xinying Liu

DOI: https://doi.org/10.1088/1755-1315/558/5/052039

2020-08-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract This paper analyses the needs of smart grids for smart substation automation systems, studies and proposes a new scheme for smart substation automation systems, which applies vertical integration of intervals to reduce the implementation of protection and monitoring functions, improve system reliability and ease of maintenance; Adopting network parallel redundancy protocol to improve the reliability and standardization of information transmission in the station; applying service-oriented monitoring function to improve the level of information sharing and coordination and interaction between substations and control centres. The key technology of the system is expounded, and its application prospect is prospected. Finally, the discussion and analysis of some problems that may exist when the system is popularized and applied.
Development of New Substations Voltage and Reactive Power Automatic Control Equipment

Ming Zhang

IF: 5.967

2002-01-01

IEEE Transactions on Power Electronics

Abstract:According to substation running properties and using the most advanced reactive regulating criteria, a substation voltage and reactive power automatic control equipment for realizing optimization control is developed. At the balanced reactive power and the qualified voltage the equipment can ensure minimum operation times of transformer tap and parallely compensate the capacitor switch.The lifetime of transformer taps and capactitor switches increases largely, and substation voltage qualification rate is reached to 100%,as well as the line loss is reduced about 20%.
Exploration of Box Substation's Several Problems

LU Hua,ZHOU Hao

2005-01-01

Abstract:With introducing the structure and merits of box substation simply, the article discusses several problems and some solutions of cubicle-type substation in essential, then points out that intelligent box substation is a development trend of future.
Substation intelligent security management and control practice based on artificial intelligence and big data analysis

Junjie Zhang,Xinzhuo Li,Li Zhang,Xian Luo

DOI: https://doi.org/10.1109/TOCS56154.2022.10016106

2022-12-11

Abstract:Using the combination of artificial intelligence and big data to provide a more efficient, safer and more accurate optimization scheme for substation intelligent security management and control. At present, there are many problems in the manual field operation of substation, such as untimely control, impractical early warning, high intensity of personnel work, uneven level of personnel skills, inefficient maintenance plan and scheme management, and difficult on-site safety supervision. There are hidden dangers in personnel and equipment to varying degrees. In order to solve the above problems, two optimization schemes are proposed for personnel operation safety and equipment maintenance safety. One is an intelligent security system that can realize the authorization management of substation operators, the orderly management of vehicle traffic and the real-time control of on-site operations. The other is an information model system that can realize intelligent management of maintenance work plan and maintenance preview simulation. The organic combination of the two systems can effectively improve the efficiency and safety of personnel and equipment management and control in the process of substation safety production. Both systems have been applied in a 220kV substation and achieved remarkable results.

Engineering,Computer Science
Design and Research of 110kv Intelligent Substation in Electrical System

Chao Yang,Chang Su,Cong Tian

DOI: https://doi.org/10.1088/1742-6596/1578/1/012211

2020-07-01

Journal of Physics: Conference Series

Abstract:Substation is an indispensable part of power system, responsible for the heavy task of power transmission and redistribution, and plays a pivotal role in the safe and economic operation of power grid. This design builds a 110 KV step-down substation. First of all, select the connection mode of each voltage level and choose the best flexible connection mode in terms of technology and economy. Secondly, calculate that short-circuit current. Obtain the values of the short-circuit steady-state current and the impulse current when the short-circuit occurs in the working bus of each voltage level from the three-phase short-circuit calculation. Finally, the equipment selection is made according to the rated voltage and the maximum continuous operating current of each voltage level, and then verified.

English Else
An Early Warning Model of Substation Over-Limit Based on Dynamic Multi-objective Intelligent Detection and Tracking Technology

An Xing,Yang Shunfu,Sun Bo,Zhang Xiaohua,Sun Meng,Guangxin Zhang,Cheng Li

DOI: https://doi.org/10.1109/aeees56888.2023.10114321

2023-01-01

Abstract:Substation is a place for voltage and current conversion, electric energy receiving and distribution in the power system. Compared with other power facilities, it has the characteristics of a small maintenance work range, short maintenance work cycle, and high voltage of live equipment around the maintenance site, to meet the requirements of substation maintenance operation safety management and portable mobile auxiliary equipment system is not mature. At the same time, the daily maintenance, expansion, transformation and other tasks of substations often have problems such as tight schedules, heavy tasks, and many cross operations. Therefore, it is very necessary to monitor the personnel and equipment on the site of substation maintenance and operation. In this paper, a dynamic multi-objective intelligent detection and tracking model was build under complex background is established to comprehensively analyze the potential transgression behaviors in the substation safety area, and realize the over-limit early warning of personnel and equipment in the substation maintenance and operation site.
Scheme Design And Algorithm Of Substation Centralized Backup Protection System

Lu Zhang,Baohui Zhang,Ye Li,Zhiqian Bo

DOI: https://doi.org/10.1109/DRPT.2015.7432366

2015-01-01

Abstract:With the enlargement of the power grid, the setting and cooperation of traditional backup protection become more difficult. Based on advanced communication network and computer technology, a new substation backup protection configuration using substation area information is introduced in this paper. The structure and function of protection configuration is detailed expatiated at first, and the fault location process based on direction, overcurrent and distance is analyzed. According to the fault location, the tripping sequence of local protection and breaker failure protection, which have a good adaptability to different main connection and operation modes, are discussed. The proposed protection system not only provides the local protection and breaker failure protection for all the equipments in the substation but also shortens the operation time and avoids the complicated cooperation.
Design of new comprehensive automation systems for substations

Yizhuang Huang

1996-01-01

Abstract:This paper introduces the basic design idea and principles of new comprehensive automation systems for substations and describes the structure and major characteristic of a hierarchical and modularized system. The functions of this system are perfect and the communication ability is advanced enough to meet the requirements of management for both manned and unmanned substations.
Discussion on Optimization Measures of Relay Protection Technology in Intelligent Substation

Zheng Li,Qianli Ma

DOI: https://doi.org/10.1109/imcec.2018.8469667

2018-05-01

Abstract:With the rapid development of China's economy, promote our country science and technology level to a certain extent, but also led to the overall level of substation automation technology in China, through the construction of the implementation of intelligent substation in China, so that it can be in the running time can be more convenient, though is the Smart Substation at run time is more complex, and the adverse factors in the actual operation of power station will appear various, bring a certain impact on the safe operation of electronic. Therefore, it is necessary to continuously optimize the relay protection technology, and lay a solid foundation for the stable operation of smart substation. So this paper is the intelligent substation relay protection technology optimization measures corresponding analysis, on this basis put forward the content of the following.
Research of the construction of AVC substation of power plant of Guangdong power grid

LI Qin,WEN Bai-jian

DOI: https://doi.org/10.3969/j.issn.1674-3415.2008.21.008

2008-01-01

Abstract:According to the construction of Automatic Voltage Control System of Guangdong power grid,some problems appeared in engineering application such as the whole structure design of AVC substation of power plant,the measurements of the AVC master station’s requirement,the consideration of the safety and reliability of control,the switching logical of control schema,and the principle of exception handling,etc,are analyzed.And this paper presents a solution for the AVC master station to control different AVC substations of power plants coordinated.
Smart Substation: State of the Art and Future Development

Qi Huang

DOI: https://doi.org/10.1109/tpwrd.2016.2598572

IF: 4.825

2016-01-01

IEEE Transactions on Power Delivery

Abstract:The smart substation, revolutionarily changing every aspect of the modern substation, is developing fast in the world and being massively deployed in China quickly. A smart substation is typically implemented with a sophisticated combination of smart primary high-voltage equipment and hierarchically networked secondary devices. Based on the IEC61850 communication protocol, the functionalities, such as the information sharing and interoperability among smart electric equipment, are realized in smart substations. It is regarded as the basis for the development of smart grid and represents the future development trend of substation technologies. This paper reviews the fundamental vision of the smart substation. The state of the art and the challenges encountered in the practice of engineering implementation are presented. Future developments to solve the present challenges and promote the development of smart substations are also described.
Smart substation advanced application software adapted for two level distributed smart dispatch and control

Hongbin Sun,Jianan Mu,Tongtian Sheng,Qingxin Li,Jing Wang,Bin Wang,Xuran Wang,Guoqiang Ji,Wenchuan Wu,Qinglai Guo,Yalou Li,Dexing Wang

DOI: https://doi.org/10.7500/AEPS20140930010

2015-01-01

Abstract:The development of smart grid has posed a challenge to the traditional centralized dispatch mode.The basic contradiction between distributed autonomy and centralized coordination is reexamined,and an architecture of smart substation advanced application software system is proposed, including such advanced applications as modeling, state estimation, intelligent alarming,voltage stability assessment and control,automatic voltage control,risk assessment modeling,etc.This facilitates a change from centralized dispatch and control mode to a more reliable,agile substation-control center two-level distributed smart dispatch and control mode.The features,functions and realization of the proposed advanced application software are described,some field engineering application cases demonstrated,and certain practical aspects of implementation discussed.Finally,the prospect for future development of the smart substation advanced application software is displayed.
Consideration on the Status of Substation Automation System Debugging and Its Development

Liang Yi

Abstract:With the development of the power grid and the prompting of the unattended substation,the requirement of the substation automation system debugging is increasing.The current debugging methods are listed in this paper,with comparison among them.Related suggestion and improvement are also presented in detail,with the following work on the substation automation system debugging pointed out in the end.

Engineering,Computer Science

Discussion of Safe Operation for Substation Comprehensive Automatic System

The Research of Configuration for Stability Control Device in Smart Substation

Discussion on Key Technology Application of Substation Based on IEC 61850 Standard

Research and Development of Comprehensive Monitoring and Management Platform for Substation

Design and Realization of Substation-Control Center Two Level Distributed Alarming System

Integrated Automation of Low Voltage Substation

Discussion about 20 kV System Client Substation Design

Application and Improvement on Voltage and Reactive Power Control System Based on Substation Supervision System

Design Application and Research of Substation Comprehensive Automation System Based on Smart Grid

Development of New Substations Voltage and Reactive Power Automatic Control Equipment

Exploration of Box Substation's Several Problems

Substation intelligent security management and control practice based on artificial intelligence and big data analysis

Design and Research of 110kv Intelligent Substation in Electrical System

An Early Warning Model of Substation Over-Limit Based on Dynamic Multi-objective Intelligent Detection and Tracking Technology

Scheme Design And Algorithm Of Substation Centralized Backup Protection System

Design of new comprehensive automation systems for substations

Discussion on Optimization Measures of Relay Protection Technology in Intelligent Substation

Research of the construction of AVC substation of power plant of Guangdong power grid

Smart Substation: State of the Art and Future Development

Smart substation advanced application software adapted for two level distributed smart dispatch and control

Consideration on the Status of Substation Automation System Debugging and Its Development