Abstract:Multi - walled carbon nanotubes with diameters of 20 similar to 30nm were synthesized by cobalt - catalytic decomposition of acetylene, which are showed by TEM images. A series of pretreatments including purification, annealing and doping were performed before carrying out hydrogen storage experiments at room temperature and modest pressure ( 12 MPa). For comparison, the annealing treatments were processed under ambient pressure in air and nitrogen atmosphere respectively. KNO3 solutions (0.1 mol/L and 1.0 mol/L) were used to dope carbon nanotubes. The results suggest that both annealing and doping play an important role in the hydrogen storage capacity of carbon nanotubes. Under the same conditions conducted, MWNTs annealed in nitrogen adsorbed more hydrogen than those annealed in air. FTIR spectra of the samples shows that the amount of oxygen functional groups linked to MWNTs after annealed in air is more than that treated in nitrogen. The former treatment may bring about more agglomeration of MWNTs, decrease the specific area and surface activity of MWNTs and eventually lead to lower capacity of hydrogen adsorption. The results also show that with the same dopant, the capacity of hydrogen adsorption has great difference when the concentration of the doping solution changed. Hydrogen adsorption of MWNTs increased not only after doped in KNO3 solution but also with the increase of solution concentration in certain extent. An optimal result(3.2%) was obtained when carbon nanotubes were annealed in nitrogen at 500 degreesC and doped in 1.0 mol/L KNO3 solution. Hydrogen desorption experiments were also carried out at room temperature. It is found that after a typical adsorption/desorption cycle under ambient. temperature, the MWNTs samples still retain significant amount of stored hydrogen. The phenomenon may be attributed to the existence of two types of adsorbed hydrogen in the structure: physical and chemical adsorptions, the former can be released easily and the latter is strongly bound and could be released more difficultly.

EFFECT OF DIFFERENT TREATMENTS ON HYDROGEN UPTAKE OF BAMBOO-LIKE CARBON NANOTUBES

THE EFFECT OF SURFACE TREATMENTS ON HYDROGEN STORAGE OF CARBON NANOTUBES

HYDROGEN ADSORPTION BEHAVIOR OF CARBON NANOTUBES WITH DIFFERENT STRUCTURE

Effects of structure and surface properties on carbon nanotubes’ hydrogen storage characteristics

The Effect of Pretreatments on Hydrogen Adsorption of Multi-Walled Carbon Nanotubes

Effect of growing CNTs onto bamboo charcoals on adsorption of copper ions in aqueous solution

Hydrogen uptake in multi walled carbon nanotubes at room temperature

SYNTHESIS OF CARBON NANOTUBES/BAMBOO CHARCOAL COMPOSITE AND ITS ADSORPTION PERFORMANCE FOR LEAD IONS

Preparation of short carbon nanotubes by mechanical ball milling and their hydrogen adsorption behavior

Pore Structure And Hydrogen Storage Of Carbon Nanotubes

Hydrogen Storage in Heat-Treated Carbon Nanofibers Prepared by the Vertical Floating Catalyst Method

CARBON NANOTUBES GROWING OVER NATURAL MINERALS AND PRELIMINARY STUDY ON THEIR CAPABILITY OF HYDROGEN STORAGE

Hydrogen Uptake by Carbon Nanotubes

Hydrogen Storage Capacity Of Potassium-Doped Multi-Walled Carbon Nanotubes

Experimental Study and Computer Simulation of Hydrogen Adsorption on Carbon Nanofibres.

Hydrogen Adsorption of Open-Tipped Insufficiently Graphitized Multiwalled Carbon Nanotubes

Influence of acid treating on texture and structure of carbon nanotubes

INFLUENCES OF THE DIFFERENT OXIDATION TREATMENTS ON THE SURFACE AND THE TEXTURE PROPERTIES OF CARBON NANOTUBES AND THE CATALYTIC ACTIVITY OF SUPPORTED Pd—Pt CATALYSTES FOR NAPHTHALENE HYDROGENATION

Studies of Multi-walled Carbon Nanotubes and Their Capabilities of Hydrogen Adsorption

Effect of Humic Acids on Physicochemical Property and Cd(II) Sorption of Multiwalled Carbon Nanotubes

Hydrogenation and Hydro-Carbonation and Etching of Single-Walled Carbon Nanotubes