A Research on the Intelligent Communication Computer Based on Serial Communication

Lu Gan

2002-01-01

Abstract:Detailedly introduces the hardware composition, working principle and software design of an intelligent communication computer based on serial communication, and discusses the interference problem of the serial communication and several anti-interference measures.

What problem does this paper attempt to address?

Design of Intelligent Serial Communication Terminal in Distributed Control System

YU Zhao-kai,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1004-4345.2011.04.043

2011-01-01

Abstract:To meet the needs of establishing a dynamic adjustable serial communication network,an intelligent serial communication terminal is designed using the method of automatic identification of communication baud rate and frame format in blind environment.After communication settings of host computer,the terminal can automatically identify and follow the communication setting of host computer and establish communication with host computer.Industrial application has proved that the intelligent serial communication terminal designed by this method enhances greatly the flexibility of serial communication with its stable and reliable operation and interference rejection.
Implementation of Serial Communication between PLC and Single-chip Microcomputer

Cheng Liang,Lin Bin,Cha Lingzhi

DOI: https://doi.org/10.3969/j.issn.1000-3886.2006.03.013

2006-01-01

Abstract:This paper introduces serial communication between PLC and single-chip microcomputer with the example of S7-226 PLC and AT89S51 MCU.Detailed explanation of hardware configuration and program design in this communication system is given.The design project in paper has been applied successfully in automatic pill-filled machine.
Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Tang Jianxin,Ma Hao

DOI: https://doi.org/10.3969/j.issn.1000-3886.2005.05.017

2005-01-01

Abstract:This paper introduces the Network communication between host computer and PLC based on a new method of linking serial server,the communication principle to host computer and the design of freeport communication.The communication protocol uses a new mode which combines query mode and real time mode and index address which realizes the alterable length of data frame.
Study on the Real-Time Serial Communication Based on Windows

陈月斌,邬义杰,刘楚辉

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.12.003

2003-01-01

Abstract:Aiming at the real-time property of serial communication between upper and lower computer of distributed control system under Windows, based on the study on VxD work characteristic and the mechanism of serial communication, this paper describes the programming method of real-time serial communication,by using VtoolsD tool, which is good solution to the key technology of developing control system of precision machining.
The Study of Programming Design Methods in Serial Communication Based on C++ Builder 6

余昌盛,许力

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.07.005

2004-01-01

Abstract:COM is the one of the most important peripheral interfaces in computer; therefore it is significant to do the study of programming design methods in serial communication. In this paper we discuss the four programming design methods of serial communication on C~(++) Builder 6 platform: direct embedded assembler, Windows API functions, MSComm component based on the technique of ActiveX and Third-Party component SPComm. We also give the compared results of the four programming design methods in serial communication, and provide programming examples.
Research on Intelligent Anti-jam Communication Techniques

李少谦,程郁凡,董彬虹,唐雪梅

DOI: https://doi.org/10.3969/j.issn.1003-3114.2012.01.001

2012-01-01

Abstract:The intelligent anti-jam communications can achieve reliable information transmission by cognition to complex electromagnetic interference environment and intelligent learning and decision,and it is an important direction of new anti-jam communication systems.The architecture of lower layer of intelligent anti-jam communication systems is discussed in this paper,then key techniques are analyzed,including interference cognition,anti-jam waveform redesign,reliable transmission of signaling,fast adapting waveform transmission and real-time intelligent decision,and the research idea is presented.
Communication in Intelligent Electric Machine Monitoring and Protecting System

Qian Hao,ZHAO Rong-xiang

DOI: https://doi.org/10.3969/j.issn.1003-188x.2005.05.087

2005-01-01

Abstract:This paper introduces the communication in intelligent electric machine monitoring and protecting system, and especially analyzes the communication in the protector and between protector and PC.
Hardware Design of Serial Communication Between PC and Microcomputer

潘策,陈晓南,杨培林

DOI: https://doi.org/10.3969/j.issn.1004-373x.2003.15.002

2003-01-01

Abstract:In terms of practice,sets forth several solutions of serial communication between PC and microcomputer.Tested by experiment,they can be applied to all kinds of serial communication system and acquire expected effect.
Research on Communication, Based on PowerBuilder, between Microcomputers and Single-Chip Computers

Su-wen ZHANG,Xiao-qing HANG,Lan LIU

DOI: https://doi.org/10.3963/j.issn.1007-144X.2001.02.010

2001-01-01

Abstract:A circuit that can realize asynchronous, both-way serial communication between microcomputers and 8031 single-chip computers using RS232 interfaces is detailed and its hardware circuit and the realization of its software are analyzed. In this circuit, the microcomputer is a master computer and the 8031 single-chip computer is a slave computer. A two-way call between a master computer and slave computers is realized through two call lines(DSR and DTR). A both-way serial communication between a master computer and slave computers is realized through a pair of communication lines(RXD and TXD). A MC 3487 is used as the remote driver and a MC 3486 as the remote receiver in order to realize remote communication and signal isolation. Data communication is realized by using the inquiry method in a microcomputer, and the interruption method in a 8031 single-chip computer. PowerBuilder language is used to realize the communication in the software design. PowerBuilder is efficient, fast and convenient as a software-developing tool. There are two methods to realize serial communication using PowerBuilder: (1) with the API communication function of Windows; (2) with the MSComm control. Programming by using API function of Windows is complicated, but the function is powerful. On the contrary, programming by using Mscomm control is simple, but the low level program can not be transferred. A method to realize communication by using Pcomm Pro function in PowerBuilderis presented, the format of the function defined and the process to call a function described. It is shown that this method is simple, efficient and applicable.
Serial Communication Design of Industrial Control System Based on Visual Basic6.0 and MX Software Package

Xiao Hua Sun,Li Yan,Zhi Yong Zhang,Fu Shun Wang

DOI: https://doi.org/10.4028/www.scientific.net/amr.765-767.1943

2013-01-01

Advanced Materials Research

Abstract:By analyzing the current serial communication design used in a popular monitor system composed of PC, GOT and PLC, introduced a new design and implementation plan of serial communication based on Vb and MX software pagekage. This system could solve the problem of managing complex communication protocol in current application, and achieved the efficient, stable and reliable communication under simple attachment. The system could not only have not to consider complex communication protocol but also need not to set up the D8120 PLC, and MX Component with other application such as GX Developer could use com port at the same time, so debug conveniently and programming high efficiency. In the actual application, No matter the accuracy and stability of communication were to achieve achieve industrial control system requirements.
Design of Remote Communication System Between PC and CNC Machine Tools

CHEN Gang,YANG Dai-hua,WANG Wei-jun

DOI: https://doi.org/10.3969/j.issn.1672-6413.2005.03.009

2005-01-01

Abstract:This article introduces the principle of remote serial communication by RS-485 series interface and the corresponding hardware configuration which can fulfill the communication function of the system. This system achieves the communication modularization of the CNC machine tools. At the same time, in order to ensure the reliability in the transmission, contraposing the problems possibly appeared in communication procedure, some rational resolvents are given in order to keep the data transmitted exactly. The system adopts the advanced language VC and assembled language to implement the communication programming design between PC and single-chip microcontroller.
Study on Developing Reusable Serial Communication Based on Component/Architecture

宁伟,蒋严冰

DOI: https://doi.org/10.3969/j.issn.1001-3695.2002.09.050

2002-01-01

Abstract:This paper puts forward a kind of method of developing communication architecture of serial port which is in common use by applying the theory of component/architecture and software reuse to serial communication,and may help to increase the benefit and effect of tapping software.
Study on Wireless Serial Communication Based on ASK

王真星,毛乐山

DOI: https://doi.org/10.3778/j.issn.1002-8331.2008.35.029

2008-01-01

Computer Engineering and Applications Journal

Abstract:Serial communication in many embedded systems adopt wireless module whose modulation style is ASK.The character of serial communication is in burst mode.While there is no data sending from the sender,the communication jamming will be emerged as the high gain of receiver,the effect is that the uart program unable to find the start of data packet.This paper analyzes the types of wireless communication jamming,then proposes a method that by sending synchronize head before serial communication to make the communication peer possible receive the data packet.The authors also describe the receiver side state machine on synchronize bit receive.
Communication System of Inspection Robot on High Voltage Transmission Line:Serial Communication Based on PC104 Industry Control Computer

Jun-fei WU,Shuang WU,Sheng-yuan JIANG,Xin-zhi WANG

DOI: https://doi.org/10.3969/j.issn.1672-6987.2006.05.019

2006-01-01

Abstract:This paper developed the communication system of inspection robot on high voltage transmission line.It introduces the hardware of industry control computer,defines the communication protocol between robot and monitoring system,and provides the C program of the system.From a variety of engineering practices,it is proved that the system is simple and useful and has a low error rate.
Implementation of a Kind of Remote Communication Control System Based on Serial Communication

Xiao Longhai

DOI: https://doi.org/10.3969/j.issn.1001-182X.2006.03.019

2006-01-01

Abstract:Remote control technique is in common use in Automation control fields.The serial communication is in widely used in remote control system.Delphi is a rapid develop tool which based on oriented object.The paper introduces the method and the step of serial communication in Delphi,include using Windows API functions,MSComm component and Async Professional component library,and gives an example.It analyzes the merits and shortcomings of every kind of method.
Design of Communication Module in a New IR Detecting System

ZHU Yongjian,CHEN Qian

DOI: https://doi.org/10.3969/j.issn.1004-373x.2005.10.006

2005-01-01

Abstract:In this article, the basic constitution and work principle of a new low altitude IR detecting system are introduced. And based on its requirements of high communication rates and high processing speed, a communication module is designed to manage the data communications. This module is consisted of RS 485 interface and multiserialchip SP2338DP and single chip microcomputer.And a twoport RAM is presented between DSP and single chip microcomputer for comunications. The hardware circuit implementation and interface between these chips are introduced in detail.The experiment proves that the processing speed is raised.
Serial Communitication under WinCE

Qingguo Xie

2010-01-01

Abstract:The article describes how to achieve serial communication between the PC and XBee Modual under WinCE.Designing the in-terface and programming according to EVC,and give the key codes of this model.The result proves that reliability and stability of the system.
The Communication Design of PLC Industrial Control System Based on VB and Mitsubishi Programming Interface Protocol

WANG Xi-wang,SUN Xiao-hua,WANG Fu-shun

DOI: https://doi.org/10.2991/iccsee.2013.372

2013-01-01

Abstract:By analyzing the current serial communication, used in a popular monitor system composed of PC, GOT and PLC, introduced a new design and implementation plan of serial communication based on Vb and Programming Interface Protocol.System achieved the efficient, stable and reliable communication under simple attachment without any mitsubishi's special communication board.The communication applied mitsubishi FX series PLC programming interface protocol, no longer need to set up the D8120, simplified the PLC program; Under this protocol and based on VB6.0 development environment，write the serial communication program adapt to FX full series，the program make the PC can read/write the PLC soft equipment and forced ON/OFF directly.In the actual application, No matter accuracy and stability of communication were to achieve requirements of industrial control system.
A Research on the Emergency Rescue Wireless Serial Communication Data Interchange Technology

Song Weiguo,Hao Jianxin,Chen Fengjun

DOI: https://doi.org/10.3969/j.issn.1673-8047.2006.03.005

2006-01-01

Abstract:This paper presents a scheme for different frequency wireless communication equipment serial data exchange control in disaster relief and emergency communications.This scheme is based on 32-bit ARM7TDMI(-S)(Advanced RISC Machines) monolithic processor to complete serial data exchange control.Experiment results show that exchange control can be realized through the collection of serial data of the handwritten input equipment and the communication radio.
The Serial Communication Between Lingyang 16 Bits MCU and Person Computer

TAO Feng,LIU Xiaodong,ZHAO Guoying

DOI: https://doi.org/10.3969/j.issn.1004-373x.2006.21.017

2006-01-01

Abstract:This paper presents a serial communication system in order to satisfy the data exchange between SPCE061A and PC.It uses the approach of asynchronous serial communication.The conversion of RS 232C and TTL is demonstrated for the difference of level between SPCE061A and PC,as well as the design of program of serial communication is given in the paper.The data format and the baud rate configuration is presented in the communication protocol part,the section of key question in the programming design gives the interruption control unit configuration.Finally,the flow chart of the sending interruption programs by using UART in SPCE061A and the subordinate program of the data sending and receiving are given.The assemble language is used in the single chip computer,while the VB6.0 is adopted in PC.The hardware and software of the system have been successfully debugged and run.

A Research on the Intelligent Communication Computer Based on Serial Communication

Design of Intelligent Serial Communication Terminal in Distributed Control System

Implementation of Serial Communication between PLC and Single-chip Microcomputer

Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Study on the Real-Time Serial Communication Based on Windows

The Study of Programming Design Methods in Serial Communication Based on C++ Builder 6

Research on Intelligent Anti-jam Communication Techniques

Communication in Intelligent Electric Machine Monitoring and Protecting System

Hardware Design of Serial Communication Between PC and Microcomputer

Research on Communication, Based on PowerBuilder, between Microcomputers and Single-Chip Computers

Serial Communication Design of Industrial Control System Based on Visual Basic6.0 and MX Software Package

Design of Remote Communication System Between PC and CNC Machine Tools

Study on Developing Reusable Serial Communication Based on Component/Architecture

Study on Wireless Serial Communication Based on ASK

Communication System of Inspection Robot on High Voltage Transmission Line:Serial Communication Based on PC104 Industry Control Computer

Implementation of a Kind of Remote Communication Control System Based on Serial Communication

Design of Communication Module in a New IR Detecting System

Serial Communitication under WinCE

The Communication Design of PLC Industrial Control System Based on VB and Mitsubishi Programming Interface Protocol

A Research on the Emergency Rescue Wireless Serial Communication Data Interchange Technology

The Serial Communication Between Lingyang 16 Bits MCU and Person Computer