Abstract:In order to improve the mechanical properties and durability of cement-based materials, a certain amount of multi-walled carbon nanotubes (MWCNTs) and polypropylene fiber (PP fiber) were incorporated into cement-based materials. The mechanical properties of the multi-walled carbon nanotubes/polypropylene fiber cement-based materials were evaluated using flexural strength tests, compressive strength tests, and splitting tensile tests. The effects of multi-walled carbon nanotubes and polypropylene fiber on the durability of cement-based materials were studied using drying shrinkage tests and freeze-thaw cycle tests. The effects of the multi-walled carbon nanotubes and polypropylene fibers on the microstructure and pore structure of the cement-based materials were compared and analyzed using scanning electron microscopy and mercury intrusion tests. The results showed that the mechanical properties and durability of cement-based materials can be significantly improved when the content of multi-walled carbon nanotubes is 0.1-0.15%. The compressive strength can be increased by 9.5% and the mass loss rate is reduced by 27.9%. Polypropylene fiber has little effect on the compressive strength of the cement-based materials, but it significantly enhances the toughness of the cement-based materials. When its content is 0.2-0.3%, it has the best effect on improving the mechanical properties and durability of the cement-based materials. The flexural strength is increased by 19.1%, and the dry shrinkage rate and water loss rate are reduced by 14.3% and 16.1%, respectively. The three-dimensional network structure formed by the polypropylene fiber in the composite material plays a role in toughening and cracking resistance, but it has a certain negative impact on the pore structure of the composite material. The incorporation of multi-walled carbon nanotubes can improve the bonding performance of the polypropylene fiber and cement matrix, make up for the internal defects caused by the polypropylene fiber, and reduce the number of harmful holes and multiple harmful holes so that the cement-based composite material not only has a significant increase in toughness but also has a denser internal structure.

Polypropylene Composites Having Carbon Nanotubes and Powder Styrene-Butadiene Rubber

Preparation and Properties of Powder Styrene-Butadiene Rubber Composites Filled with Carbon Black and Carbon Nanotubes

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Reinforced-Toughened by Styrene–butadiene Rubber and Graphene Oxide Nanosheets

New Fabrication and Mechanical Properties of Styrene-Butadiene Rubber/Carbon Nanotubes Nanocomposite

Preparation and Properties of the Powder Sbr Composites Filled with Cnts by Spray Drying Process

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Filled by Styrene‐butadiene Rubber and Silica Nanoparticles

The optimization of mechanical properties of polypropylene/styrene butadiene rubber/silicon carbide nanocomposites using response surface methodology

Improved molecular chain constraint of poly (propylene carbonate) composites by the synergistic effect of poly (vinyl alcohol) and carbon nanotubes

Preparation of Polypropylene/carbon Nanotube Composite Powder with a Solid‐state Mechanochemical Pulverization Process

Tensile Performance Improvement of Low Nanoparticles Filled-Polypropylene Composites

Enhanced Foamability Of Isotactic Polypropylene Composites By Polypropylene-Graft-Carbon Nanotube

Electrical properties of carbon nanotubes/styrene-butadiene rubber composites

Thermal Properties of Carbon Nanotubes/Styrene-Butadiene Rubber Composites

Study on the Properties of Multi-Walled Carbon Nanotubes (MWCNTs)/Polypropylene Fiber (PP Fiber) Cement-Based Materials

High impact strength of polypropylene composites with complex titanate whiskers/multiwalled carbon nanotubes

Preparation, Structure and Properties of Thermoplastic Olefin Nanocomposites Containing Functionalized Carbon Nanotubes

Impact and Flexural Properties of Polypropylene Composites Reinforced with Multi-Walled Carbon Nanotubes

Interfacial Modification of Single-Walled Carbon Nanotubes for High-Loading-Reinforced Polypropylene Composites

Mechanical Properties and Biocompatibility of Functionalized Carbon Nanotubes/polypropylene Composites

Mechanical properties and structural characteristics of PP/PP-g-SBR nanocomposites prepared by dynamical photografting

Effect of Wet Surface Treated Nano-Sio2 on Mechanical Properties of Polypropylene Composite