DEVELOPMENT AND APPLICATION OF COMPOUND TECHNOLOGY OF STICK AND BRUSH ELECTROPLATING

Li Shao

2001-01-01

Abstract:A new type of surface repairing technique, which combined the advantages of stick and brush plating techniques, was introduced in this paper.

What problem does this paper attempt to address?

A New Type of Coating Brush Plating Solution and Its Application Performance

Zhifei Meng,Kewang Zheng,Chaofan Huang,Wei Li,Caiqin Qin

DOI: https://doi.org/10.3390/coatings12020134

IF: 3.236

2022-01-24

Coatings

Abstract:A new type of coating brush plating solutioncontaining stannous sulfate and potassium pyrophosphate was prepared by solution mixing method.Its structures, physicochemical properties, and the application effect in power equipment contact were also investigated by electrochemical workstation, X-ray photoelectron spectroscopy (XPS), scanning electron microsco (SEM), Mapping, and infrared thermometer. The results showed that the tin coating has good adaptability to the ambient temperature and good adhesion with the copper substrate. Cerium nitrate was evenly distributed over the tin plating layer, reduced the crystal refinement of tin and lead to a uniform distribution of microdefects. When the cerium nitrate content, the amount of additives, the amount of complex agent, and the number of brush plating operations are 0.1%, 10.0%, 8.0%, and 5 times, respectively, the tin plating layer has the best electrochemical performance. For application, the damaged contacts of power equipment can fully meet the demand of power use after being treated by the new brush plating solution.

materials science, multidisciplinary,physics, applied, coatings & films
Design of Brush Plating Repair Device for Big Hole of Connecting Rod of Automobile

Peng Qiu,Wei Li

DOI: https://doi.org/10.1088/1742-6596/2450/1/012053

2023-03-09

Journal of Physics: Conference Series

Abstract:Brush plating technology has been applied to the surface repair and strengthening of parts and achieved remarkable benefits, so it can be used as a part remanufacturing method. This graduation project aims to design a brush plating repair device for the big end hole of an automobile connecting rod in the field of automobile technology application, including brush plating power supply, electroplating pen, plating solution, and brush plating auxiliary equipment, so as to realize the clamping and rotation of the workpiece, the clamping of plating pen and the axial and radial movement of plating pen relative to the workpiece. The three-dimensional models of parts and parts are established by modeling software and installed. The equipment can greatly improve the maintenance efficiency and product quality of vehicle connecting rods, obtain a safer production process, and is suitable for mass reproduction of vehicle connecting rods.
Development of electroplating in ultrasonic field

LIU Guo-hong,KUANG Tong-chun,HU Song-qing,CHENG Xiao-ling,XIANG Wen-yong

DOI: https://doi.org/10.3969/j.issn.1004-227X.2006.03.014

2006-01-01

Abstract:The working principle of ultrasonic was described. The research and application of the ultrasonic before electroplating and in monometallic and alloy electroplating were introduced. Ultrasonic electroplating can not only improve the adhesion of the deposit to substrate, but also refine grains, improve roughness of deposit surface, widen the range of current density, enhance current efficiency and obtain the deposit with better performance. The ultrasonic electroplating has better application prospect.
New Technology of Surface Treatment in 21Century

FANG Jing-li

DOI: https://doi.org/10.3969/j.issn.1001-3660.2005.05.001

2005-01-01

Surface Technology

Abstract:Surface treatment technology are not only a decorative technology of products,but also are a manufacturing technology of products,improvement technology of products function and manufacturing technology of the latest nano materials.Facing the challenges of the new law and regulation in 21 Century and the requirements of high technic development,how to satisfy these new requirement? In this paper,the advantages and disadvantages of new lead-free final finishing of PCB,for example,electroless nickel/immersion gold,immersion silver,immersion tin,organic solderability preservative(OSP) and electroplating nickel/electroplating gold are reviewed.Electroplating,electroless plating and deposite plating are the most simple and easy methods of manufacturing nano deposit.The properties and grain size control and applications in surface treatment of many nano deposits are introduced.The new surface treatment technologies of information industry,for example,the wet manufacturing technology of copper circuit,copper plating of via filling,single tank copper plating system for fine line,immersion silver and immersion tin of fine line flex board are reviewed.The super critical fluid(SCF) surface treatment is the latest surface treatment technology in 21 century.Its characters and application of SCF in IC and PCB are also reviewed.Surface treatment;Printed board;Lead-free final finishing;IC industry;Nano surface treatment;Surface treatment of super critical fluid
Study on the Complex Tools Coating Technology by Edm

Y. Fang,Z. L. Wang,W. S. Zhao

DOI: https://doi.org/10.4028/www.scientific.net/kem.315-316.579

2006-01-01

Key Engineering Materials

Abstract:A kind of new complex tools coating technology by EDM (Electrical Discharge Machining) is studied in this paper. Firstly the principle of this technology is discussed. In order to meet the coating requirement of the high-speed steel twist drill, milling cutter or other complex tools, a set of coating device is designed and fabricated secondly, and the tools with different dimension are coated successfully by this device. Finally the performance evaluation of coated twist drills is carried out through the drilling test.
Preface to Special Issue on Electronic Electroplating

Zhi-Dong Chen,Chong Wang,Wei He,Ming Li

DOI: https://doi.org/10.13208/j.electrochem.210440

2022-01-01

Abstract:Electroplating is a process using electric current to deposit a layer of metal(s),which is an indispensable technique in the manufacture of integrated circuits and micro-nano electronic devices.Electroplating for modern electronics is much smaller in scale than the ordinary electroplating processes and relies heavily on foreign technique,such as proprietary materials and equipment.As the competition in the field of chip manufacture intensifies,we realize that there is no choice but to become self-sufficient in such tech-nology,including,but not limited to electroplating technology.
Research Progress on Electroless Copper Plating

TIAN Qing-hua,YAN Jian-feng,GUO Xue-yi

DOI: https://doi.org/10.3969/j.issn.1004-227x.2007.04.012

2007-01-01

Abstract:In recent years,the status of electroless copper plating technique is rising constantly in surface treating industry,which is more and more extensive applied in several fields including electronics industry,mechanical industry,aerospace,etc.The investigation on the mechanism of electroless copper plating and process improvement have become one of the most interesting topics.In this paper,the general situation and the recent research progress of electroless copper plating were introduced.Some new advanced technologies were reviewed.The future research directions were presented.
Developments and Applications of Electroless Composite Plating

仵亚婷,沈彬,刘磊,胡文彬

DOI: https://doi.org/10.3969/j.issn.1004-227x.2005.01.016

2005-01-01

Abstract:Electroless composite coatings are widely applied in industry due to the excellent properties of the particles in them. The study status and development trends of electroless composite plating worldwide were reviewed. The process research of electroless composite plating with substrates of Ni-P and Ni-B as well as the structure and properties of the coatings was discussed from the aspects of hardness, wear resistance and self-lubricating property, which demonstrated that the study on electroless composite plating still focused on wear resistant and self-lubricant coatings. The applications of various eletroless composite coatings were introduced, and the developments were prospected.
Technology and Performance of Brush Plating Al/Cu Composite Coatings

HUA Jian-feng,JIANG Li

DOI: https://doi.org/10.3969/j.issn.1003-0794.2012.05.056

2012-01-01

Abstract:This article described that the plating Al/Cu composite coating particles of the brush plating technology is used in the 45 steel substrate and the performance of coating Al content in the solution formulation and brush voltage were studied.According to experiment,the optimum process parameters are that the bath concentration of nano-aluminum powder is 20 g/L and plating voltage is 10 V.Under the optimal process parameters,Al/Cu composite coating microhardness is HV243.7 and the wear volume of the ordinary copper plating is 1.76 times than Al/Cu composite coatings,which are very important for improving the workpiece's wear resistance and reliability
Preparation of anti-corrosion superhydrophobic coatings by an Fe-based micro/nano composite electro-brush plating and blackening process

yan wei,liu hongtao,zhu wei

DOI: https://doi.org/10.1039/c5ra15640h

IF: 4.036

2015-01-01

RSC Advances

Abstract:Superhydrophobic coatings with high strength and corrosion resistance on hard metal surfaces have been attracting significant attention in recent years. In this paper, a quick and easy method using Fe-based micro/nano composite electro-brush plating and subsequent modification with stearic acid was established for fabricating superhydrophobic surfaces on A3 steel plates. The processing parameters including the working voltage, the brushing speed and the micro-TiO2 particle concentration were studied to determine their influences on the wettability. A blackening process was conducted to further improve the corrosion resistance of the Fe-based plating layer with high water repellency. The surface morphology and chemical composition were analyzed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Corrosion resistance ability was measured using an electrochemical workstation. The results suggested that: the rough structure of the superhydrophobic coatings can be successfully fabricated by electro-brush plating technology with appropriate parameters; after post-treatment by stearic acid, the contact angle of the composite coating was up to 156 degrees and the sliding angle was even as low as 1 degrees under the optimal process. Meanwhile blackening treated superhydrophobic coatings still maintained excellent superhydrophobicity and the self-corrosion potential improved by 0.116 V compared to the untreated brush plating layer and the prepared superhydrophobic coatings achieved an excellent long term anti-corrosion performance.
Applications of Electroplating Technology in Electronic Packaging

李明

DOI: https://doi.org/10.3969/j.issn.1004-227x.2005.01.013

2005-01-01

Abstract:Functional coatings and precise electroplating technology are widely used in semiconductor microelectronic industry. With the development of semiconductor integrated circuit to high density and light-small scale, various new functional electroplating technologies will come forth constantly. The application examples of functional coatings and precise coatings in electronic packages were listed. The electroplating techniques in BGA packaging were briefly introduced. Various electronic electroplating technology in electronic packaging were systematically discussed. Moreover, the applications, existing problems and development trends of IC lead-frame and lead-free electroplating technology were illustrated.
Brushing Up Functional Materials

Shuanhong Ma,Xiaoqin Zhang,Bo Yu,Feng Zhou

DOI: https://doi.org/10.1038/s41427-019-0121-2

IF: 10.761

2019-01-01

NPG Asia Materials

Abstract:Surface-grafting polymer brushes (SPB), which are used in a versatile technique to easily realize surface modifications, can be commonly used to change the inherent surface physical/chemical properties of materials. In particular, producing functional polymer brushes with well-defined chemical configurations, densities, architectures, and thicknesses on a material surface has become increasingly important in many fields. Achieving such goals is highly dependent on the progress of novel surface-grafting strategies, which are commonly based on surface-initiated polymerization (SIP) methods. On the other hand, practical applications have been given more attention since the SPB technique enables the engineering of materials with diverse functions. This review reports some new grafting strategies for generating polymer brush layers and then systematically summarizes research advances in the application of polymer brush-modified materials in multiple fields. Correspondingly, some necessary challenges of the SPB technique are unreservedly pointed out, with consideration given to its real applications in the future. The aim of this article is to tell readers how to engineer functional materials through SPB techniques and what can be done with polymer brushes in the future.
A Study of a New Mechanical-Electrochemistry Polishing Method with Wire-Combined Tool

Guo, Z.N.,Liu, J.W.,Huang, Z.G.,Chai, M.Z

DOI: https://doi.org/10.1049/cp:20060953

2006-01-01

Abstract:Based on the idea of mechanical-electrochemical polishing, a new wire-combined tool had been developed and an investigation has been made into the polishing feasibility of the surface of hard materials when a new mechanical-electrochemistry method is adopted. This tool is made up with the inner electrode and the external helical abrasives. The new structure of this wire-combined tool produces screwy effects of electrochemistry and grind through the movement of turning. This tool has been used to polish some kinds of hard materials. After machining, the surface quality and mechanical performance of the specimens are studied. The experimental results show that this mechanical-electrochemistry method can improve the surface roughness and decrease surface cracks greatly. In additional, there are no wastage of the tool that can be founded during the process. The experiment reveals that it is a feasible and effective polish method for improving the surface integrity of hard materials.
Electroplastic Drawing and Treatment Technology and Application

唐国翌,姜雁斌,崔敬泉

DOI: https://doi.org/10.3969/j.issn.1001-1269.2008.03.018

2008-01-01

Abstract:In recent years,electroplastic drawing process has been developed significantly to be a new technology for metal wires process.This technology induces electroplastic effect during high-energy electropulsing passing through the plastic deformation zone of metal wires.And this decreases drawing force,results in microstructure change and improves formability limit and mechanical properties of metal wires.Electroplastic effect,three typical electroplastic drawing equipments and applications of electroplastic drawing on the stainless steel wire processes and high carbon steel wire were introduced.
New Technology for Rapid Prototyping and Electrodeposition with Friction

ZHU Ben-ling,LIU Zhi-dong,WANG Gui-feng,TIAN Zong-jun,SHEN Li-da,ZHU Jun

DOI: https://doi.org/10.14136/j.cnki.issn1673-2812.2012.04.032

2012-01-01

Abstract:Because of the defects such as the easily produced tumors and the burrs on the electrodeposition surface during the electrodeposition process,friction assistive device was added in it and a kind of electrodeposition rapid prototyping technology that based on discrete/accumulation theory was proposed.The new technology is the core principle of rapid prototyping technology and can directly deform the metal parts simply,quickly and with low cost.Copper electrodeposition experiments show that the real-time dynamic friction closing to the cathode surface can effectively remove adsorption bubbles and tumors of the electrodeposition surface and obtain a smooth and bright surface for the electroforming layer;the rapid prototyping of friction electrodeposition technology takes the advantages of both the electroforming technology and the rapid prototyping technology,so the complexity of equipments and the cost of the parts can be effectively reduced and the precise metal parts with complex shapes,compact and homogeneous structure can be directly and quickly created.
A Comprehensive Study on the Characteristics of Electro-brush Nickel Matrix Composite Coats

Wei Al,Zhi GAO,Hong-liang PAN,Jing-jing ZHANG,Hong AI

DOI: https://doi.org/10.3969/j.issn.1673-1409-C.2005.01.015

2005-01-01

Abstract:The state-of-the-art study and development of electro-brush in recent years are reviewed. Emphasis was placed on the tendency of electro-brush Ni matrix composite coats associated with higher hardness, wear resistance composite coats; higher temperature-stain resistance, higher temperature-wear resistance composite coats and self-lubricating composite coats. The advantages of wear resistance, higher temperature-stain resistance and higher temperature-wear resistance of these 3 composite coats are discussed. The trend of composite plating technology in the future is prospected at the end of this monograph.
Electroplating of HAp-brushite coating on metallic bioimplants with advanced hemocompatibility and osteocompatibility properties

Yanhong Wang,Bing Wu,Songtao Ai,Daqian Wan

DOI: https://doi.org/10.1177/22808000221103970

Abstract:In cases of severe bone tissue injuries, the use of metallic bioimplants is quite widespread due to their high strength, high fracture toughness, hardness, and corrosion resistance. However, they lack adequate biocompatibility and show poor metal-tissue integration during the post-operative phase. To mitigate this drawback, it is beneficial to add a biocompatible polymer layer to ensure a quick growth of cell or tissue over the surface of metallic bioimplant material. Furthermore, this additional layer should possess good adherence with the underlying material and also accompany a rapid bonding between the tissue and the implant material, in order to reduce the recovery time for the patient. Therefore, in this work, we report a novel green electroplating route for growing porous hydroxyapatite-brushite coatings on a stainless steel surface. The malic acid used for the production of hydroxyapatite-brushite coatings has been obtained from an extract of locally available apple fruit (Malus domestica). We demonstrate the effect of electroplating parameters on the structural morphology of the electroplated composite layer via XRD, SEM with EDS, and FTIR characterization techniques and report an optimized set of electroplating parameters that will yield the best composite coating in terms of thickness, adherence to substrate and speed. The hemocompatibility and osteocompatibility studies on the electroplated composites coating show this technology's effectiveness and potential applicability in biomedical applications. Compared to other routes reported in the literature, this electroplating route is quicker and yields better composite coatings with faster bone tissue growth potential.
Application of Local Brush-Plating in Hot-Dip-Galvanizing of Parts

LI Min,Li Jun

DOI: https://doi.org/10.3969/j.issn.1001-1560.2007.01.023

2007-01-01

Abstract:It is imperative to cover the finely machined locations of parts during hot-dip-galvanizing treatment so as to retain the machining precision. Thus local brush-plating was tried for the hot-galvanizing of some parts and put into production practice as well. It was found that, by making use of the brush-plating technique, it was feasible to get rid of galvanizing coating at the finely machined locations of the parts and well retain the machining precision. And the Iocal brush-plating process was well applicable in industrial practice.
Development of Electroless Plating on Surface of Carbon Fibers

Shu Sun

2014-01-01

Abstract:In recent years,many conductive polymer composites have been produced using carbon fiber as reinforcements.The electroless plating process is a very promising modification method to improve the character of the surface of carbon fiber.The different kinds of electroless planting on surface of carbon fiber are introduced.The pretreatment process of carbon fiber,process of electroless planting and domestic and foreign research situation are discussed in detail.Additionally,the existing issues about electroless plating on surface of carbon fibers in relevant fields and future research trend are summarized.
Design of speed and pressure controllable electrod tip dressing system

Qiu Pengcheng,Chen Guanlong,Zhang Yansong,Zhang Xuqiang

DOI: https://doi.org/10.3969/j.issn.1001-1382.2008.02.017

2008-01-01

Abstract:The current compensating and traditional electrode tip repairing are the main solutions to welding spot quality caused by the tipwear. Aiming at the disadvantage of the two mentioned method, a new method was put forward whose speed and pressure are controllable whilethe tip repairing. And a new the tip repair method was constructed . At last, the advantage of the system has been proved by experiment. Theexperiment proved that the new the tip method is better than the traditional method in the tip repairing quality and efficiency.

DEVELOPMENT AND APPLICATION OF COMPOUND TECHNOLOGY OF STICK AND BRUSH ELECTROPLATING

A New Type of Coating Brush Plating Solution and Its Application Performance

Design of Brush Plating Repair Device for Big Hole of Connecting Rod of Automobile

Development of electroplating in ultrasonic field

New Technology of Surface Treatment in 21Century

Study on the Complex Tools Coating Technology by Edm

Preface to Special Issue on Electronic Electroplating

Research Progress on Electroless Copper Plating

Developments and Applications of Electroless Composite Plating

Technology and Performance of Brush Plating Al/Cu Composite Coatings

Preparation of anti-corrosion superhydrophobic coatings by an Fe-based micro/nano composite electro-brush plating and blackening process

Applications of Electroplating Technology in Electronic Packaging

Brushing Up Functional Materials

A Study of a New Mechanical-Electrochemistry Polishing Method with Wire-Combined Tool

Electroplastic Drawing and Treatment Technology and Application

New Technology for Rapid Prototyping and Electrodeposition with Friction

A Comprehensive Study on the Characteristics of Electro-brush Nickel Matrix Composite Coats

Electroplating of HAp-brushite coating on metallic bioimplants with advanced hemocompatibility and osteocompatibility properties

Application of Local Brush-Plating in Hot-Dip-Galvanizing of Parts

Development of Electroless Plating on Surface of Carbon Fibers

Design of speed and pressure controllable electrod tip dressing system