Abstract:Fatigue failure caused by frequent tension and bending loads is a crucial safety concern for mooring chains used on floating structures in the oil and gas industry. The bending effect for a chain's fatigue is usually not considered by existing fatigue analysis methods, and even if it is considered, existing commercial software can only calculate the constant interlink bending stiffness without consideration of the stiffness variations due to tension and friction. To address this issue, this study develops an in-plane bending (IPB)/out-of-plane bending (OPB) fatigue assessment approach for offshore mooring chains considering the time-varying nonlinear interlink bending stiffness. Initially, the mooring tension and IPB/OPB angles are calculated by an in-house code MeCAP (multi-element coupled analysis program), considering the time-varying interlink stiffness between the chain links. The fatigue life of mooring chains for pure tension–tension (TT) and OPB combined fatigue at different hotspot locations (A, B, and C) is calculated by MeCAP-fatigue, a newly-developed module in MeCAP. Based on the analysis model, a comparative study is implemented to investigate the effects of interlink stiffness on fatigue damage. The differences and advantages of the combined fatigue calculation method over the pure TT fatigue assessment method are discussed. The results illustrate that combined fatigue would be underestimated significantly if zero interlink stiffness (hinge joint assumption) is applied or even constant interlink stiffness (calculated by mooring pretension), while pure TT fatigue will be largely unaffected. Moreover, compared to pure TT fatigue, the OPB combined fatigue assessment method, considering the effects of OPB/IPB and the time-varying properties of the connection between chain links, could evaluate fatigue life more comprehensively.

Sensitivity Analyses for Time-Domain Fatigue Life of Umbilical Bending Stiffener

Ultra-low Cycle Fatigue Evaluation Method for Unstiffened Steel Piers Using Fiber Model

Fatigue Failure Analysis and Simulation Calculation of Submarine Suspended Pipelines

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

An Out-of-Plane Bending Fatigue Assessment Approach for Offshore Mooring Chains Considering the Real-Time Updating of Interlink Bending Stiffness

Dynamic Analysis of Unbonded Flexible Pipe with Bend Stiffener Constraint and Bending Hysteretic Behavior

A Finite Element Model for Prediction of the Bending Stress of Umbilicals

Flexible Riser Tensile Armour Stress Assessment in the Bend Stiffener Region

Prediction of nonlinear mechanical characteristics for metallic strip flexible pipe with bend stiffener constraints

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Failure Analysis of Hat-Stringer-Stiffened Aircraft Composite Panels under Four-Point Bending Loading

Fatigue Reliability Analyses on Key Parts of Tension Leg Platform

A Theoretical Method To Estimate The Fatigue Life Of Tensile Armors Of Flexible Pipes

Hot Spot Stress Approach For Fatigue Life Assessment In Welded Bridge Connections Using Monitoring Data And Fem Analysis

Theoretical and Finite-Element Study of Mechanical Behaviour of Central, Large-Diameter Umbilical Cables under Tension and Torsion

Fatigue life prediction method for subsea wellhead welds based on the nonlinear fatigue accumulation model

Alternative analytical and finite element models for unbonded flexible pipes under axisymmetric loads

Flexural fatigue behavior of butt-welded circular concrete-filled double skin steel tube (CFDST)：Experimental study and numerical modeling

Analysis Of Subsea Umbilical Mechanical Behavior Under Simultaneous Bending, Tension And Torsion

Fatigue analysis of water intake risers: Hydrodynamic damping effect and a hybrid frequency-time domain method

Frequency-domain hydroelastic stress analysis considering local bending effect based on a two-step procedure