Abstract:Wide bandgap semiconductors show superior material properties enabling silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFETs) present good features on its switching speed and withstand voltage. However, the high voltage and fast switching characteristics of SiC MOSFETs also put forward new requirements for voltage measurement, that is, high bandwidth under high voltage conditions. This article proposes a new voltage divider structure and a proactive parameter design compensation network to build high voltage and high bandwidth voltage sensing circuit. This structure utilizes the characteristics that the same resistor has the same parasitic capacitance to meet the high frequency constraints of the voltage sensing circuit. The influence of parasitic parameters and load parameters on circuit performance is analyzed in detail, which provides a basis for the compensation network design. By combining the proposed voltage sensing circuit with an appropriate proactive parameter design load effect compensation network (PDCN), the withstand voltage rating of the low-voltage and high-bandwidth voltage probes can be extended to required levels. Different from other existing methods, PDCN can actively design the compensation circuit parameters and provide the optimal parameters of the compensation circuit. This lead to a smaller input capacitance than the state of the art commercial voltage probes, which will help to obtain better performance when measuring high-speed switching voltage. The performance of the voltage measurement is experimentally verified and compared by SiC-based double pulse test (DPT) circuits.

A Comparison of the Automatic Circuit Imbalance Compensation

System Design of a Low Noise, Low Offset Instrumentation Amplifier with Chopper Stabilization

A Frequency-Domain I/Q Imbalance Calibration Algorithm for Wideband Direct Conversion Receivers Using Low-Cost Compensator.

A Low Power Continuous Time Hysteresis Comparator with an Average Current Consumption of 614na at 1.5 Voltage

A Dynamic Voltage Compensation Method for Improving Weighing Accuracy

An Effective DC Offset Calibration Method Combined with Analog and Digital Circuits for Direct Conversion Receivers

A Low-Power Area-Efficient Wide-Range Offset Calibration Technique for High-Speed High-Resolution Comparator

A Wide-Range and High-Precision Real-Time Calibration for Dynamic Comparator

Improving Source-Follower Buffer For High-Speed Adc Testing

A CMOS High-Speed Multistage Preamplifier for Comparator Design

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

A Low-Offset Calibration-Free Comparator with a Mismatch-Suppressed Dynamic Preamplifier

A Low-Cost High-Performance Voltage Sensing Circuit with Proactive Parameter Design Compensation Network for SiC MOSFETs.

Design of a Comparator with High Speed and High Precision

Circuit Design of a High Performance CMOS Continuous-time Current Comparator with Gain Boosting Structures in Parallel

Noise analysis and characterization of a full differential CMOS interface circuit for capacitive closed-loop micro-accelerometer

A precise dynamic CMOS comparator

A 0.2-Mv 20-Mhz 600-Μw Comparator

A Background Test and Calibration Technique of Nonlinear Mismatches in MEMS Oscillating Accelerometers

A Dynamic CMOS Comparator with High Precision and Resolution

A low power and high speed 45 nm CMOS dynamic comparator with low offset