Abstract:Despite recent advances in leak detection in water supply systems, previous studies focused mainly on material aspects or orifice opening characteristics. This study evaluated geometric, hydraulic, and hydrodynamic factors influencing on water leaks using three-dimensional (3D) computational fluid dynamics (CFD) simulations. The simulated discharge coefficient (C-d) had a maximum absolute deviation of 8% compared with experimental data. The results indicated that the variation of C-d as a function of the diameter and orifice size can be attributed to the effect of tube curvature on flow convergence through the orifice. The statistical analysis concluded that the orifice-to-pipe diameter ratio d/D is the best dimensionless parameter that explains this phenomenon, which agreed with the analyses of the streamlines and turbulent eddy dissipation rate in the simulations. Other important dimensionless parameter are the ratio of the pressure head differential at the orifice to the pipe diameter Delta H/D, Reynolds number (R), and the ratio of the pressure head differential at the orifice to the wall thickness Delta H/e, in order of relevance. A set of empirical correlations was elaborated through a nonlinear multiple regression analysis with Reynolds numbers ranging between 12,000 and 52,000, and pressure head differential ranging from 1 to 45 m. This study advances the knowledge of cross-flows through orifices, and the proposed correlations potentially can improve the prediction of water leaks in pipes. (c) 2023 American Society of Civil Engineers. Practical Applications: This study demonstrates the applicability of computational fluid dynamics simulations for understanding the leakage phenomenon in pipes, and obtained a set of empirical correlations that potentially can improve the prediction of leakages in water distribution systems. The authors propose an equation for estimating the discharge coefficient in practical applications. This equation balances the number of terms (three dimensionless coefficients) and accuracy (R-2 = 98%). Although it is dimensionless, the correlation must be used within the established ranges of values to ensure its effectiveness: Reynolds numbers from 12,000 to 52,000, and pressure head differentials from 1 to 45 m.

Cost Function, Optimal Pipe Diameter and Economical Flow Velocity of Water Supply System

Efficient Numerical Approach for Simultaneous Calibration of Pipe Roughness Coefficients and Nodal Demands for Water Distribution Systems

A quantitative analysis on the influence of temperature on head loss along PVC pipe and the choice of pipe diameter

An Improved Genetic Algorithm For Optimal Layout Of Flow Meters And Valves In Water Network Partitioning

Demand-Driven Spatiotemporal Variations of Flow Hydraulics and Water Age by Comparative Modeling Analysis of Distribution Network

Establishment and Application of Coupled Model for Optimal Operation of Water Supply Network

Calibration of Nodal Demand in Water Distribution Systems

Optimization of Water Pipe Network and Formulation of Pumping Rate

Computational Simulation of the Flow Induced by Water Leaks in Pipes

Optimization Model for Water Distribution System Design

Optimization design for diameter in irrigation pipeline network in land consolidation

Techno-economic Calculation for Multi-sources Water Distribution Network

Optimizing the system-wide layout of sewage treatment plants based on enumeration and the orthogonal test

The rapid calculation method of the design flow of water supply pipe design in residential building

Selection of Water Transmission Method and Analysis of Pipe Network Zoning in Municipal Water Supply and Drainage Design

Better Water Demand and Pipe Description Improve the Distribution Network Modeling Results

Diameter optimal design of slurry transportation pipeline

Field Application of Least Cost Design Model on Water Distribution Systems using Ant Colony Optimization Algorithm

Theoretical Considerations of Joint Optimal Model for Water Allocation and Pipe Placement

Optimizing Intermittent Water Supply in Urban Pipe Distribution Networks

Discussion on Optimization Design Objectives of Water Distribution System