Abstract:Hydraulic models have been widely used to facilitate the design, management, and operation of water distribution systems (WDS). However, model parameters including pipe roughness coefficients (PRCs) and nodal demands (NDs) must be calibrated before practical applications, and the calibration accuracy and efficiency is important to enable their wide uptake in practice. This therefore motivates intensive studies to develop approaches for model calibration focusing on either optimization algorithms or numeric methods. Although these previous studies have advanced this research area, the calibration efficiency and effectiveness need to be further improved, especially when dealing with real-world problems. To attain this objective, this paper proposes an efficient numerical approach to simultaneously calibrate PRCs and NDs for WDS. Within this method, the calibration objective function is formulated as a least-square equation, followed by the derivation of iterative formulas according to a local sensitivity analysis. These formulas allow PRCs and NDs to be iteratively updated in an efficient manner until the given convergence criteria are met. To further improve the efficiency, the pipes and nodes are grouped according to their physical properties, which allows the calibration dimensions to be significantly reduced. Additionally, within the calibration process, values of PRCs and NDs are restricted into specified ranges to ensure the calibrated results are practically meaningful. Two case studies are used to demonstrate the utility of the proposed method, and results show that this approach is able to simultaneously calibrate PRCs and NDs efficiently, with the modeled hydraulic parameter values (pipe flows and nodal pressures) matching well with observations.

Better Water Demand and Pipe Description Improve the Distribution Network Modeling Results

Demand-Driven Spatiotemporal Variations of Flow Hydraulics and Water Age by Comparative Modeling Analysis of Distribution Network

Discussion on Status Modeling Method for Municipal Water Distribution Network

Impacts of Nodal Demand Allocations on Transient-Based Skeletonization of Water Distribution Systems

Experimental Testing and Modeling Analysis of Solute Mixing at Water Distribution Pipe Junctions.

Skeletonizing Pipes in Series Within Urban Water Distribution Systems Using a Transient-Based Method

Water Quality Modeling in Sewer Networks: Review and Future Research Directions

A Novel Statistical Model for Water Age Estimation in Water Distribution Networks

Real-Time Water Distribution System Hydraulic Modeling Using Prior Demand Information by Formal Bayesian Approach.

Efficient Numerical Approach for Simultaneous Calibration of Pipe Roughness Coefficients and Nodal Demands for Water Distribution Systems

Dealing with Data Missing and Outlier to Calibrate Nodal Water Demands in Water Distribution Systems

Foul Sewer Model Development Using Geotagged Information and Smart Water Meter Data.

A Pipe Network Skeleton Method Based on GIS Network Analysis Technologies

A Water Distribution System Model to Simulate Critical Scenarios by Considering Both Leakage and Pressure Dependent Demands

[Development and Application of a Multi-Species Water Quality Model for Water Distribution Systems with EPANET-MSX].

Optimizing Intermittent Water Supply in Urban Pipe Distribution Networks

A Superposed Model for the Pipe Failure Assessment of Water Distribution Networks and Uncertainty Analysis: A Case Study

Research on Experimental Model for Water Distribution Network Based on Distorted Similarity Theory

Integrated Model Driven by Agent-Based Water End-Use Forecasting to Evaluate the Performance of Water and Wastewater Pipeline Systems

Development and Verification of a Pipe Network Scale Model

Modelling Water Distribution Systems with Deficient Pressure: an Improved Iterative Methodology