Abstract:Silicon-based materials have become one of the most likely materials to replace graphite anodes of Li-ion batteries due to their ultra-high theoretical specific capacity, safe lithium intercalation potential, and abundant reserves. However, the large volume effect of silicon-based materials during cycling has become a serious obstacle to their commercial application. Silicon-metal composite is one of the potential solutions to alleviate the volume effect of silicon-based anode. Traditional electrodes are prepared by slurry coating method, and the electrodes crack and fall off after many cycles, resulting in capacity loss. In this paper, a cold spraying method combined with ball milling was proposed to prepare silicon-copper composite electrodes to improve the bonding between electrode materials and the cycling stability of the electrodes. Composite powders with different component ratios were first prepared. Then, the micromorphology, bond strength, thermal conductivity, and electrochemical performance of the electrodes prepared by the slurry coating method and the cold spray method were analyzed, respectively. The results show that the Cu 100- x Si x cold sprayed electrodes have higher bond strength and porosity, while the higher porosity of the cold-sprayed electrodes does not promote heat transfer. After the addition of conductive carbon black, the electrodes exhibit better structural stability, cycling performance, capacity retention, and reaction kinetics, with the Cu 80 Si 20 + SP cold prayed electrode exhibiting 600 mAh g −1 after 200 cycles. This work not only successfully prepared a silicon-copper composite anode with excellent performance but also provided a reference for the preparation of other composite electrodes by cold spray combined with ball milling.

Silicon Silver Composite Materials for Li-ion Batteries

Synthesis and the Improved High-Rate Performance of Limn2o4/Ag Composite Cathode for Lithium-Ion Batteries

Preparation and Study on Si/Ag/C Composite As Anode Material for Lithium Ion Batteries

One-pot Prepared Silicon-Silver-polydopamine Ternary Composite Anode Materials with High Specific Capacity and Cycling Stability

Preparation and Electrochemical Characterization of Tin/graphite/silver Composite As Anode Materials for Lithium-Ion Batteries

Cu5Si–Si/C composites for lithium-ion battery anodes

Synthesis and electrochemical properties of novel silicon-based composite anode for lithium-ion batteries

Ag–Sb Composite Prepared by Chemical Reduction Method As New Anode Materials for Lithium-Ion Batteries

Si-based composite anode materials for Li-ion batteries

Si/Ag/C Nanohybrids with in Situ Incorporation of Super-Small Silver Nanoparticles: Tiny Amount, Huge Impact

Electrochemical Performance Of Si-Mn Composites In Li-Ion Battery

Study on Silicon-Based Composite Anode Material for Li-ion Battery

3-Aminopropyltriethoxysilane-assisted Si@Sio2/Cnts Hybrid Microspheres As Superior Anode Materials for Li-Ion Batteries

Preparation of Si-Based Composite Anode for Li-Ion Batteries by Cold Spraying and Its Electrochemical Performance

A Graphene-Wrapped Silver–porous Silicon Composite with Enhanced Electrochemical Performance for Lithium-Ion Batteries

Yolk-shell silicon/carbon composites prepared from aluminum-silicon alloy as anode materials for lithium-ion batteries

Preparation of hard carbon–coated and metal-modified silicon anode materials for lithium-ion batteries

Structural Changes in the Silver-Carbon Composite Anode Interlayer of Solid-State Batteries

Effect of Li–Si composites on electrochemical properties of silicon-based anode materials

High-Performance Porous Silicon/Nanosilver Anodes from Industrial Low-Grade Silicon for Lithium-Ion Batteries.

In-situ construction of Li-Ag/LiF composite layer for long cycled all-solid-state Li metal battery