Research on the EGSB Reactor's Characteristic Low Temperature Operations

Dong Chen,Qingliang Zhao
2007-01-01
Applied Mechanics and Materials
Abstract:This paper has done an investigation and research on the EGSB reactor's working performance at low temperatures around 10 -15℃.The results of research prove that the EGSB reactor can be expected to help stabilize the operation efficiency at about a low tem- perature of 10℃.The COD removal efficiency can also be made to increase to about 70% with the COD concentration dropping to 114 mg/L or rising to 3 500 mg/L (23 kg COD·m~(-3)·d~(-1) organic loads).The settled velocity of the granules in such low temperatures can also be tolerable to medium temperatures,but not over the limit of 15 m/h so as not for the sludge to be washed out from the reactor. Nevertheless,it should be pointed out that lowering the operation temperature is still likely to lead to an obvious decrease in the granu- lar methanogenie aetivity and COD's removal efficiency,because the increase of temperature helps to speed up the liquid up-flow velocity and improve the mass-transfer as well as the COD removal efficiency. On the contrary,lower operation temperature may result in distinctive drop of the rate constant.In the conditions of 0.9 h HRT and at about 3.0 m/h liquid up-flow velocity,the rate constant K and the COD removal efficiency is likely to drop from 0.391×10~3,84.32% to 0.107×10~3,68.9% respectively with the performance tempera- ture of the EGSB reactor reduced from 35℃to 15℃.But with the increase of the liquid up-flow velocity from 3.0 m/h to 4.2 m/h,the rate constant K and the COD removal efficiency can be expected to increase from 0.107×10~3,68.9% to 0.254×10~3,76.70%.On the condition of low temperature at about 10℃,the EGSB reactor may have strong ability to support the temperature shock.Although it has a low supporting pH shock ability at low temperatures,its sup- porting pH shock abihty may get stronger with the influent COD in- crease even at low concentration.Thus it is necessary for the reactor to keep proper pH value so as to supply sufficient,alkalinity.
What problem does this paper attempt to address?