Abstract:For the research on real-time accurate testing technology for the explosion point spatial coordinate of munitions, its currently commonly used methods such as acoustic–electric detection or high-speed imaging are limited by the field conditions, response rate, cost, and other factors. In this paper, a method of spatial coordinate testing for the explosion point based on a 2D PSD (position-sensitive detector) intersection is proposed, which has the advantages of a faster response, better real-time performance, and a lower cost. Firstly, a mathematical model of the spatial coordinate testing system was constructed, and an error propagation model for structural parameters was developed. The influence of the position of the optical axes' intersection as well as the azimuth angle and pitch angle on the test accuracy of the system was simulated and analyzed, thus obtaining the distribution and variation trend of the overall error propagation coefficient of the system. Finally, experiments were designed to obtain the test error of the system for validation. The results show that the system test accuracy is high when the azimuth angle is 20°–50°, the overall error propagation coefficient does not exceed 48.80, and the average test error is 56.17 mm. When the pitch angle is −2.5°–2.5°, the system has a higher test accuracy, with the overall error propagation coefficient not exceeding 44.82, and the average test error is 41.87 mm. The test accuracy of the system is higher when the position of the optical axes' intersection is chosen to make sure that explosion points fall in the region of the negative half-axis of the Zw-axis of the world coordinate system, with an overall error propagation coefficient of less than 44.78 and an average test error of 73.38 mm. It is shown that a reasonable selection of system structure parameters can significantly improve the system test accuracy and optimize the system deployment mode under the long-distance field conditions so as to improve the deployment efficiency.

A Simulation Approach to Analyzing the Aiming Accuracy of Neutralization Weapon Affected by Sensor Error

Error-simulation System Modeling and Error Analyzing of an Articulated Arm Coordinate Measuring Machine

Simulation of Missile-borne Active Bait' S Decoying Process in Interfering with Missile

Error Analysis Of Spherical Ultra-Precision Measurement

Analyzing Errors in Controlled Turret System

Integrated simulation modeling of transfer alignment with airborne weapon

Pointing Error Analysis of Three-axis Simulation Missile Turntable

Design and Software Implementation of a Navigation Accuracy Evaluation Based on Error Model Solution

Study on Methods of Sensor Management Based on Tracking Accuracy Control

Analyzing Errors in Controlled Turret System Given Target Location Input from Artificial Intelligence Methods in Automatic Target Recognition

Machine Learning Based Accuracy Prediction Model for Augmented Biofeedback in Precision Shooting

Analysis of LOS Measurement Error for Space-Based Optical Sensor

System modeling based measurement error analysis of digital sun sensors

Modeling and simulation of hit accuracy of EFP destruction element under disturbance conditions of UAV

A Spatial Vector Projection Based Error Sensitivity Analysis Method for Industrial Robots

A calibration method for enhancing robot accuracy through integration of kinematic model and spatial interpolation algorithm

Measure Precision Analysis of Relative Movement Angles for Space Object Based on Spaceborne Electron-Optical Sensor

A Study on the Weapon–Target Assignment Problem Considering Heading Error

A nonlinear momentum observer for sensorless robot collision detection under model uncertainties

Study on a Closed-Loop Fire Correction Algorithm in Vehicle Close-In Weapon System

Error Analysis and Optimization of Structural Parameters of Spatial Coordinate Testing System Based on Position-Sensitive Detector