Abstract:Cobalt-nickel (Co-Ni) free Lithium-rich cathode material (1 − x)Li2MnO3·xLiFeO2 is more environmental friendly and cheaper than other traditional cathode materials. However, the complex synthesis method limits its large-scale practical application. This work explores a simple dry synthesis route to directly obtain 0.7Li2MnO3·0.3LiFeO2 with good electrochemical performance. Calcination temperature is a key factor controlling the phase growth. With the calcination temperature increasing, the crystallization and ordered layered structure are improved, but the LiFe5O8 spinel phase appears in X-ray diffraction (XRD) patterns from 600 °C. The results of selected area electron diffraction (SAED), element mapping (EDS) and vibrating sample magnetometer (VSM) demonstrate convincingly the growth progress of LiFe5O8 as the temperature rises. The spinel phase deteriorates the electrochemical performance. Furthermore, it is proved that the crystallization and activity of Li2MnO3 precursor are effective to retard the formation of LiFe5O8 and enhance the electrochemical performance. The sample calcined at 600 °C exhibits a high initial capacity above 200 mAh g−1, but capacity fades quickly to 120 mAh g−1 after 50 cycles at 0.2 C. The sample calcined at 650 °C with a little LiFe5O8 delivers a low initial capacity about 160 mAh g−1, but stabilizes at 160 mAh g−1 after 50 cycles. Therefore, how to control the formation of thermally stable phase LiFe5O8 is an important issue, and it needs further investigation to achieve Co-Ni free Li-rich cathode materials with excellent performance. Significantly, the simple synthesis and acceptable electrochemical properties make the practical application of Fe-Mn based Li-rich material possible.

Synthesis and Characterization of Ultrafine LiNi_(0.8)Co_(0.2)O)2 Powders by a Freeze-Drying Method

Cathode Materials of Li_xCo_(0.8)Ni_(0.2)O_2 for Lithium-ion Battery

Synthesis and Characterization of LiNi0.8Co0.2O2 As Cathode Material for Lithium-Ion Batteries by a Spray-Drying Method

Synthesis and Electrochemical Properties of LiNi0.8Co0.15Al0.05O2 Prepared from the Precursor Ni0.8Co0.15Al0.05OOH

Synthesis and Characterization of Layered Li（Ni1/3Mn1/3CO1/3）O2 Cathode Materials by Spray-Drying Method

Synthesis and Characterization of Ultrafine LiCoO2 Powders by a Spray-Drying Method

Synthesis and characterization of spherical LiNi0.7Co0.15Mn0.15O2 via co-precipitation

Influence of Synthetic Conditions on Structure and Electrochemical Performance of Li [ Ni1/3Co1/3Mn1/3 ] O2

Effect of Calcining Temperature on the Structure and Electrochemical Performance of Li[Mn_(1/3)Ni_(1/3)Co_(1/3)]O_2

Spray-Drying Synthesized Lini0.6co0.2mn0.2o2 and Its Electrochemical Performance As Cathode Materials for Lithium Ion Batteries

Characterization of Wet-Chemistry Synthesized LiNi_(0.8)Co_(0.2)O_2

Synthesis and Characterization of LiNi_(1/3)Mn_(1/3)Co_(1/3)O_2 by High Temperature Solid-state Method

Preparation and electrochemical characterization of LiNi 0.8 Co 0.2 O 2 cathode material by a modified sol–gel method

Performances of Layered LiNi_(0.5)Co_(0.5)O_2 Prepared by Microwave-solid Phase Compound Heat Method

Low temperature synthesis of LiNiO 2 @LiCoO 2 as cathode materials for lithium ion batteries

Synthesis and Characteristics of Nanostructured Li(Co1/3Ni1/3Mn1/3)O2 Cathode Material Prepared at 0 °C

Preparation and Electrochemical Properties of LiNi_(0.8)Co_(0.2)O_2 Cathode Material by Microwave Coprecipitation Method

Preparation and electrochemical properties of submicron LiNi 0.6Co0.2Mn0.2O2 as cathode material for lithium ion batteries

Temperature-controlled direct dry synthesis of Co-Ni free cathode materials 0.7Li2MnO3·0.3LiFeO2 for lithium-ion batteries

Synthesis and characterization of high-density non-spherical Li(Ni1/3Co1/3Mn1/3)O2 cathode material for lithium ion batteries by two-step drying method

High Performances of Ultrafine and Layered LiCoO2 Powders for Lithium Batteries by a Novel Sol–gel Process