Abstract:In this brief, a high-gain and wide-bandwidth single-stage gain-boosted cascode amplifier (GBCA) is proposed for the front-end sample-and-hold amplifier (SHA) in 14-bit 2.5-GS/s pipelined analog-to-digital converter (ADC). This GBCA is composed of a two-layer main cascode amplifier and a three-layer cascode feedback amplifier (FA). The three-layer cascode structure introduces more than 20-dB gain enhancement compared with conventional two-layer FAs. However, adjacent poles appear near the gain bandwidth product (GBW) of the three-layer cascode FA, which may seriously deteriorate the phase margin (PM) of the FA and further prolong the settling time of closed-loop GBCA. A PM expansion technique is proposed to improve the PM of FA by adding a group of switched capacitor array. At the same time, the open-loop GBCA achieves 104-dB direct-current (dc) gain and 65.2-GHz GBW, which satisfies the harsh requirements of the ping-pong interleaved SHA with 12-dB gain on-chip. The pipelined ADC fabricated in 28-nm CMOS process consumes 554 mW at 2.5-GS/s sampling rate, while achieves a signal-to-noise-and-distortion ratio (SNDR) of 52.5 dB and a spurious free dynamic range (SFDR) of 86.4 dBc with 161-MHz input signal.

Analysis and Design of Fully Differential Gain-boosted OPAMP Dedicated to 14 Bit Sample-and-Hold Circuit

An Analysis and Implementation of Common Mode Feedback in High-Speed Fully Differential Op-Amp

High gain, high speed OTA for S/H circuit in 14-b 100-MS/s Pipeline ADC

Optimization Of Sample/Hold Circuit For High-Speed And High-Resolution Adcs

A Low Power Sample-and-Hold Circuit for Pipelined A/D Converter

High-Speed Operational Amplifier Based on 0.5 Μm CMOS Process

High-speed and high-gain operational amplifier

Low power design for 14-bit 100MSPS pipelined ADC

The Design of a Low-Voltage Rail-to-Rail CMOS Operational Amplifier

A sample and hold circuit for high speed ADCs

Design of a High-Speed Sample-and-hold Circuit Using a Substrate-Biasing-effect Attenuated T Switch

A Single-Stage Gain-Boosted Cascode Amplifier with Three-Layer Cascode Feedback Amplifier for Front-End SHA in High-Linearity Pipelined ADC

Design of a fully differential gain-boosted folded-cascode op amp with settling performance optimization

A 12-Bit 200-Ms/s Sample-and-hold Amplifier with a Hybrid Miller-Feedforward Compensation Technique

Design of a High-Performance and Low-Power Two-Stage OP Amp

A 1.2V Sample-and-Hold Circuit for 14-Bit 250MS/s Pipeline ADC in 65nm CMOS

The Design and Optimization of Gain-Boosted OTA for High Speed and High Accuracy Sample and Hold Amplifier

A Design of High Performance Operational Amplifier

Full custom design of a two-stage fully differential CMOS amplifier with high unity-gain bandwidth and large dynamic range at output

A Sample/Hold Circuit for Low-Power High-Resolution A/D Converters

An Fully Differential Operational Amplifier for Pipelined A/D Converter