Discussion of Teaching Reform for the Course of Mechanical Drawing

Minghui Pu

2007-01-01

Abstract:Based on the present situation of the course of mechanical drawing,this paper analyzes the reform on the teaching contents,course system,and teaching methods.It indicates the new way for the reform of the course of mechanical drawing to adopt multimedia technology,and develop course ware and achieve network teaching step by step.

What problem does this paper attempt to address?

A Discussion on How to Improve Teaching on Mechanical Drawing

Wei Yu

1999-01-01

Abstract:This paper, concentrating on improving teaching quality on mechanical drawing, discusses the ways of teaching reform in five aspects, i e , teaching content optimization, teaching method improvement, exam system reformation and teachers enhancement in number and quality, etc
Research and Reform of the Teaching of the Course in Mechanical Drafting

沈连婠,王瑞芳,邬玉亭,王琪民

DOI: https://doi.org/10.3969/j.issn.2095-1663.2004.04.007

2004-01-01

Abstract:This paper describes a reform in the teaching of the course in mechanical drafting in the areas of course structure, teaching materials and teaching methods. This student-centered teaching reform has been carried out in an ongoing manner. It has brought the initiatives of both teachers and students into play, raised students' interest, enhanced the efficiency of teaching through better activities, and therefore improved the overall quality of teaching.
To Reform the Teaching Method of the Mechanical Drawing with SolidWorks and AutoCAD

Xu Yunfe

Abstract:With computer-aided design software widely used in engineering practice, traditional mechanical drawing teaching methods are obvious shortcomings in the effect of the culture of reading and drawing mechanical drawings, such as teaching by physical model or drawing exercises with tools. In this paper, the course hours of mechanical drawing is redistributed, then SolidWorks and AutoCAD computer-aided design software is integrated into the course teaching practice, so students' ability of manual drawing and computer graphics is dual-trained and students' learning enthusiasm and initiative are fully mobilized. Using this flexible teaching mode, teaching and learning are much easier, good teaching effect has gotten.

Computer Science,Engineering
The Improvement of Practice Teaching in Drawing Series Courses

Shuxia Wang

DOI: https://doi.org/10.11996/JG.j.2095-302X.2016040573

2016-01-01

Abstract:Practice teaching is gradually becoming a reformation hot spot of teaching method in national university. But how to integrate the curriculum system and course groups with multi-dimensional practice teaching has not been deeply concerned. The existing problems are analyzed in the practice teaching of the drawing series courses. An innovative experiment platform for practice teaching reform is suggested. A multi-dimensional practice teaching is proposed by adding advanced computer-aided design technology into the curriculum teaching, participating in relative competition and certification test, opening elective courses, and so on. The teaching practice proves that the multi-dimensional practice teaching reform can stimulate students’ interest and improve the comprehensive quality.
Exploration on Project-based Teaching Reform of Engineering Drawing Course

Chen Ying,Chen Gang,Liu Songqing,Wang Hongfen,Yang Nannan,Li Linlin

DOI: https://doi.org/10.2991/icem-18.2019.40

2018-01-01

Abstract:Engineering Drawing is a basic course of mechanical specialty, and it is a link to follow-up specialty courses. In order to improve the quality of classroom teaching, project-based teaching reform is implemented in 10 projects based on curriculum objectives and job requirements. Through the project-based teaching design, which takes students as the main body, project theme as the center, and aims at cultivating students' inquiry learning, the integration of knowledge, theory and ability practice can be realized. Keywords—Engineering drawing , Project-based teaching , Reform in Education
The Teaching Reform and Practice of Engineering Drawing Based on the System Engineering

Liang CHEN,Lingling WU,Ruiqiu ZHANG,Wei XIONG,Zhinan QIN

DOI: https://doi.org/10.11996/JG.j.2095-302X.2018061214

2018-01-01

Abstract:By combining the Hall three-dimensional structure with the teaching system of engineering drawing, this paper analyzes the interrelationships among course hours, teaching contents and teaching methods through the perspectives of time dimension, knowledge dimension and logical dimension in a systematic and comprehensive way. Moreover, under the guiding of new engineering disciplines, we present some new teaching methods and teaching skills in engineering drawing course, including mobile learning, seminar teaching, innovative case teaching, immersive learning and so on. Our teaching practice has demonstrated that these reform measures can significantly improve teaching quality and effectiveness.
Reflecting on the Teaching Analysis of Pictorial Geometry and Mechanical Drawing Course from the Cultivation of Engineering Design Ability

Yu Ding,Longhua Li,,

DOI: https://doi.org/10.47852/bonviewcetr23209900504

2023-05-01

Contemporary Education and Teaching Research

Abstract:Along with the deepening of education and teaching curriculum reform in the new era, it also fully promotes the new development of teaching curriculum of pictorial geometry and mechanical drawing course. Traditional teaching methods and teaching concepts are no longer applicable to students at this stage, and pictorial geometry is the most basic professional course in a mechanical drawing course, teachers should focus their teaching on the cultivation of students' engineering design ability, deepen the education and teaching reform of mechanical drawing course, fully carry out the creation of diversified teaching classes, and establish a perfect modular teaching system, so that students can more intuitively, comprehensively and effectively master mechanical drawing course. In this way, students can master the knowledge of mechanical drawing courses more intuitively, comprehensively and effectively, and further promote the comprehensive development of students' overall quality. This paper discusses "reflecting on the teaching analysis of pictorial geometry and mechanical drawing course from the cultivation of engineering design ability" for reference only.
Research and Practice of the Teaching Reform for Professional Course

Xining Li

DOI: https://doi.org/10.1007/978-3-642-24823-8_115

2011-01-01

Abstract:Professional courses are significant for the undergraduate students. Nowadays the teachers face many problems in teaching reform of professional course. One of them is how to improve the quality of professional course teaching and develop students’ specialty ability under the circumstance of class hour decreased. On the basis of analyzing the course contents and teaching features for the professional course of “forming methods of sheet metal for airplane parts”, the article focuses on the professional course system, teaching method, and teaching fulfillment combining the course teaching process. Firstly consolidating resources in existence, courses system is constructed according to classroom teaching and experiment teaching. Secondly as one of the most important tools in the modern education revolution, that is multimedia teaching method, is applied to classroom teaching in order to increase the student’s direct feeling. Finally the experimental teaching including demonstration teaching is carried out. Preliminary achievements are acquired in teaching practice. The students raise the interest in the professional lesson, expand knowledge range, and improve professional character.
Application and consideration for using modern teaching means in mechanical experiment teaching

ZHENG Xi-tao,WANG Sheng-nan,LI Ya-zhi

2007-01-01

Abstract:It is a general trend for mechanics experimental teaching to use modern teaching means for assistant teaching. This paper introduces the practice of the experiment teaching reform in mechanics by making good use of multimedia courseware, explores the reforming thought on enhancing the teaching effect, and proposes training students' ability of solving problems in engineering practice and constructing mechanical model by developing comprehensive and researching experiment item and exploring reasonable experiment teaching mode. It is possible to fully promote students' study interest, further improve students' logical and comprehensive ability, and strengthen students' creative consciousness and ability.
Reform the Teaching of Electric Machinery and Drive Course

Gui-rong CHEN,Shao-ke LIU

DOI: https://doi.org/10.3969/j.issn.1008-0686.2008.06.001

2008-01-01

Abstract:This paper presents the teaching reform of the Electric Machinery and Drive course as follows: reform the teaching course,including setting teaching outline scientifically,strengthening teaching material compiling and selecting the contents of the course reasonably;reform the teaching methods and teaching measures,including adopting various teaching methods,multimedia technique and setting up network course by information technique;reform experiment,including reforming experiment teaching and practice lesson;reform the testing methods,including setting up item pool and adopting various examining ways.
Teaching Reform on the Foundation of Mechanical Design(B) Course Based on Network Platform of Course Center

Yiqing Yang,Richeng Xie

DOI: https://doi.org/10.3969/j.issn.1672-1438.2016.09.010

2016-01-01

Abstract:Due to the weak knowledge and lack of learning resources for the students close to the mechanical major, the teaching reform in the course of Foundation of Mechanical Design(B) is carried out under the guide of the"Great Wall Action Plan"of Beihang University. Considering the specialty of scientific research in Beihang, the reform establishes a course network platform which includes teaching courseware, exercise library and lfash animation modules.
Reform of Course of Mechanical Design Basic Teaching for the Cultivation of Digital Design Ability

Ke Zhang

2014-01-01

Abstract:The application of digital design technology has exerted a far-reaching influence on the development of machinery manufacturing industry. Teaching reform of the course of mechanical design basic for digital design is a task which brooks no delay. According to the characteristics of mechanical design basic course and the digital design, the reform must be carried out in many aspects, such as integration of the course content, teaching method, teaching material construction, teachers training and so on. This paper surrounds these problems, and makes some thinking and discussion.
3D Modeling and Engineering Drawing Course Reform Based on the Practice Ability Cultivation

DONG Wen-jie,LI Hua-xiong,LIU Xuan

2014-01-01

Abstract:The 3D modeling and engineering drawing is a core course of mechanical engineering professional group in higher vocational colleges, is an important specialized course with practical application. The traditional teaching method is used to pay attention to the command interpretation, the selection project most cases from the enterprise products, unable to carry out effective teaching. For this reason, this article takes reform and research in view of the course content, teaching method, students' practical ability, in order to improve the teaching effect.
The Teaching Method Reformation For Software Course

Wei-Wei Pan

2016-01-01

Abstract:This paper firstly introduces some features of computer software courses, and then discusses the existing problems of software engineers by the investigation and analysis of the needs of IT companies. Finally, the corresponding countermeasures and suggestions are put forward for the existing problems to meet the social requirements.
Exploration and practice of group-type teaching method in Mechanical Drawing

Ying Wang,Pei-nian Wu

DOI: https://doi.org/10.3969/j.issn.1005-4634.2016.05.018

2016-01-01

Abstract:In order to solve the current problems such as low learning interest and teaching efficiency in mechanical drawing course, teaching practice process about how to apply the group?type teaching method to the mechanical drawing course is de?tailedly introduced in this paper.According to the teaching effect and feedback coming from students, learning passion and learn?ing ability can be improved significantly by using group?type teaching method.Furthermore, students change from passive learning to active learning.At the same time, teamwork consciousness and sense of group honor of the students are strengthened by group?type teaching method. It is very valuable and provides an important reference to the reform of the same kind course.
Innovative Reform of Engineering Drawing Course Based on Design Project Drive

Zhao Mingxia

DOI: https://doi.org/10.1088/1742-6596/1738/1/012100

2021-01-01

Journal of Physics: Conference Series

Abstract:Abstract Under the background of deepening the reform of vocational education, vocational schools and professional teachers are trying more teaching methods and using more advanced teaching methods. Based on the existing research theories and achievements, this paper takes the engineering project professional skills training as an example, explores how to combine the work content with the project teaching content, optimizes the project teaching, improve the teaching quality of the engineering project related courses, improves the teaching effectiveness and enriches the teaching theory, so as to improve the theoretical research of relevant courses for reference and find out the way and general law of project teaching implementation, and construct the project teaching mode with secondary vocational characteristics, and update the education and teaching concept, and help the project teaching reform, and promote the comprehensive, coordinated and sustainable development of secondary vocational schools.
Course Reform of Engineering Graphics of the Fewer Class-Hour Type

黄利平,孟明辰

DOI: https://doi.org/10.3969/j.issn.1003-0158.2002.02.024

2002-01-01

Abstract:Aimed at training a kind of research persons in Tsinghua university, a new idea about course reform of engineering graphics on fewer class-hour type was explored. The reform goal and reform main content of the course was discussed. The new course system that based on design information management, emphasized 2-demensional and 3-demensional CAD system, syncretized graphics, mechanics, manufacture, machining and management subject was provided. The content configuration of the course and the implement environment of software-hardware were expounded.
On the Teaching Mode of Drawing Course in Applied Undergraduate Major in Mechanical Engineering

Aiping CHEN,Yanxiang CHEN

DOI: https://doi.org/10.16400/j.cnki.kjdks.2016.12.065

2016-01-01

Abstract:Through the analysis of the current situation of the application of mechanical professional drawing class teaching, the deficiency was pointed out in the paper. The effective countermeasures and suggestions on the teaching content, teaching design, teaching methods, curriculum evaluation, and related curriculum system construction were put forward.
Practice and reflection on enhancing students' ability to interpret blueprints in the teaching of "3D mechanical drawing"

Xu Dan

DOI: https://doi.org/10.3969/j.issn.2095-302X.2012.06.021

2012-01-01

Abstract:With 3D Solid Structure becoming the main expression and the expression of 3D design and 2D engineering graphics being equally important,teaching reform of knowledge structure system is deepening.More and more people begin to realize it and the amount of relevant papers is continuously increasing.This is because that,with the development of computer science and technology,computer technology has gradually spread into the fields of other sciences,having changed the structure of industries in the society,and,as one of the oldest subjects,engineering drawing is also meeting the revolution brought by the new technology era.So,in order to conform to the development of the times,it is the inevitable trend of the development of history that the expression of 3D by 2D projection transits to direct 3D design in graphics education. Based on the practical experience of teaching"3D mechanical drawing"for more than a decade,aiming at how to improve students' spatial imagination ability and to finish the transit 2D to 3D,this paper summarizes the educational reform practice in these years as well as the author's own teaching practice and reflection on it.
Exploration of Teaching Reform of Drawing Courses in Chinese Colleges and Universities Based on the Advanced Engineering Education Model

Yong-gang Dong,Jian-feng Song,Heng Zhu,Guo-ling Luo

DOI: https://doi.org/10.2991/hss-17.2017.7

2017-01-01

Abstract:With the development of AMT (Advanced Manufacturing Technology), the greater demands have been placed on the Chinese higher education system in recent years. Characteristics of drawing courses in Chinese colleges and the advanced engineering education mode-OBE (Outcomes-based Education) were introduced firstly, and the requirements of AMT for the reform of drawing courses were presented. Moreover, the existing problems in traditional teaching model were listed, and the reform plans based on the discussing class and team project were proposed. In addition, the implementation details of teaching reform of drawing courses were given. In the end, the teaching reform practice was accomplished in Yanshan University and the students' achievements based on the discussing class and team project were shown in this paper.

Discussion of Teaching Reform for the Course of Mechanical Drawing

A Discussion on How to Improve Teaching on Mechanical Drawing

Research and Reform of the Teaching of the Course in Mechanical Drafting

To Reform the Teaching Method of the Mechanical Drawing with SolidWorks and AutoCAD

The Improvement of Practice Teaching in Drawing Series Courses

Exploration on Project-based Teaching Reform of Engineering Drawing Course

The Teaching Reform and Practice of Engineering Drawing Based on the System Engineering

Reflecting on the Teaching Analysis of Pictorial Geometry and Mechanical Drawing Course from the Cultivation of Engineering Design Ability

Research and Practice of the Teaching Reform for Professional Course

Application and consideration for using modern teaching means in mechanical experiment teaching

Reform the Teaching of Electric Machinery and Drive Course

Teaching Reform on the Foundation of Mechanical Design(B) Course Based on Network Platform of Course Center

Reform of Course of Mechanical Design Basic Teaching for the Cultivation of Digital Design Ability

3D Modeling and Engineering Drawing Course Reform Based on the Practice Ability Cultivation

The Teaching Method Reformation For Software Course

Exploration and practice of group-type teaching method in Mechanical Drawing

Innovative Reform of Engineering Drawing Course Based on Design Project Drive

Course Reform of Engineering Graphics of the Fewer Class-Hour Type

On the Teaching Mode of Drawing Course in Applied Undergraduate Major in Mechanical Engineering

Practice and reflection on enhancing students' ability to interpret blueprints in the teaching of "3D mechanical drawing"

Exploration of Teaching Reform of Drawing Courses in Chinese Colleges and Universities Based on the Advanced Engineering Education Model