Abstract:In this work, an examination on the modal properties of a single-span steel-frame footbridge is presented. The footbridge is situated in Jawornik (Lesser Poland). The footbridge is symmetrical since its main structure consists of two steel frames of the same shape. The boundary conditions for both frames are the same as well. The study was completed on the basis of numerical as well as experimental investigations. For finite element (FE) analysis, a 3-D model of the single-span steel-frame footbridge was created. For the experimental study, a research scheme for in situ tests was developed. Three kinds of excitation techniques were used during the in situ tests: shock excitation, operational vibration, and slow sine sweep testing. Different functions that estimate natural frequencies, i.e., the power spectral density function (PSD) and the frequency response function (FRF), were applied. The modal assurance criterion (MAC) was used as a mathematical tool for the verification of the mode shapes of natural vibrations obtained in experimental and numerical ways. Good compatibility was recognized between the results obtained for experimental and numerical procedures in terms of both the natural frequency and the mode of vibration. The identified and verified values of the five consecutive natural frequencies of the footbridge were smaller than 5 Hz, but they were recognized as being located outside the frequency range defined as having “maximum risk of resonance". The numerical and experimental modal analysis revealed that all modes corresponding to the natural frequencies from the 0–5 Hz range have both a symmetrical and an anti-symmetrical nature. In particular, the first vertical mode, which can play a central role from the serviceability of the footbridge point of view has a symmetrical shape. The results of the research might be applicable to the dynamic study of the structure type considered in the analysis, i.e., for the dynamic assessment of a single-span steel-frame footbridge with a relatively large mass as well as stiffness. The investigation proved that ambient vibration modal experiments are enough for the experimental investigation of the modal properties of the structure.

Error Research on Mode Synthesis Method of Prefabricated Bridge

Experimental Study and Numerical Analysis of A Composite Bridge Structure

EXACT MODAL SYNTHESIS TECHNIQUES USING RESIDUAL CONSTRAINT MODES

Calculation method for human-bridge vertically coupled vibration

Exact Synthesis of Structural Random Responses Using Substructure Modes

EXACT MODAL SYNTHESIS METHOD USING MID/HIGH-ORDER SUBSTRUCTURE MODES

New Modal Synthesis Technique Using Mixed Modes

Some Problems Regarding Experimental Modal Synthesis Method

Mode Shape Identification and Damage Detection of Bridge by Movable Sensory System

Dynamic Analysis on Coupled Vehicle-bridge System by Modal Synthesis Method

Multimode coupled nonlinear flutter analysis for long-span bridges by considering dependence of flutter derivatives on vibration amplitude

Estimating Bridge Natural Frequencies Based on Modal Analysis of Vehicle–Bridge Synchronized Vibration Data

Interval Uncertainty Identification and Application of Strain Modes in Bridge Structures Based on Monitoring Big Data

Bridge modal identification method based on adaptive VMD-HT algorithm

Modeling and Analysis of 1:3 Internal Resonance of Suspension Bridge Under Boundary Excitations

Theoretical and Experimental Study on Vibration Modal for Simply Supported Bridge

Updating the Finite Element Model of Large-Scaled Structures Using Component Mode Synthesis Technique.

Full-Scale Experimental and Numerical Investigations on the Modal Parameters of a Single-Span Steel-Frame Footbridge

A New Way to Define Closely Spaced Modes of Vibration

Modal Frequency Shifts Measured on Xinjiang Bridge Excited by Traveling Vehicles